|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.11, No.2 (July, 2016) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Formation of Through Holes in Glass Substrates by Laser-Assisted Etching [DOI: 10.2961/jlmn.2016.02.0001]
|
|
|
Masatoshi Yonemura, Toyota Central R&D Labs., Inc. ;
Satoru Kato, Toyota Central R&D Labs., Inc. ;
Kazuo Hasegawa, Toyota Central R&D Labs., Inc. ;
Hidetomo Takahashi, Aisin Seiki Co., Ltd.;
|
|
|
(pp.143
-
146)
Received: May 24, 2015,
Accepted: March 2, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Biomimetic Coatings on Fiber Laser Modified Ti-6Al-4V Surfaces [DOI: 10.2961/jlmn.2016.02.0002]
|
|
|
T.F. Hong, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
L.M. Fu, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
B.S. Wu, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
K.Y. Lin, Department of Vehicle Engineering, National Pingtung University of Science and Technology;
H.K. Lin, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
T.Y. Kuo, Department of Mechanical Engineering, Southern Taiwan University of Science and Technology;
|
|
|
(pp.147
-
152)
Received: May 25, 2015,
Accepted: March 2, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Influence of Cu Addition to Improve Shape Memory Properties in NiTi Alloys Developed by Laser Rapid Manufacturing [DOI: 10.2961/jlmn.2016.02.0003]
|
|
|
S. Shiva, Laser Mechatronics and Instrumentation Laboratory, Indian Institute of Technology;
I. A .Palani, Laser Mechatronics and Instrumentation Laboratory, Indian Institute of Technology;
S. K. Mishra, Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology;
C. P. Paul, Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology;
L. M. Kukreja, Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology;
|
|
|
(pp.153
-
157)
Received: May 25, 2015,
Accepted: March 16, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Silver Nanoparticles by Laser Ablation Confined in Alcohol Using an Argon Gas Environment [DOI: 10.2961/jlmn.2016.02.0004]
|
|
|
David Omar Oseguera Galindo, Posgrado en Física de Materiales, Centro de Investigación Científica y de Educación Superior de Ensenada;
Oscar Hernández Utrera, Catedrático CONACyT, Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México;
Roberto Machorro Mejía, Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México;
Miguel Ángel Santana Aranda, Departamento de Física, Centro Universitario de Ciencias Exactas e Ingenierías, Universidad de Guadalajara;
|
|
|
(pp.158
-
163)
Received: October 29, 2015,
Accepted: March 21, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Capabilities of Laser-Induced Marks as Information Carriers Created in Different Materials [DOI: 10.2961/jlmn.2016.02.0005]
|
|
|
Volodymyr A. Gnatyuk, V.E. Lashkaryov Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine;
Oleksandr I. Vlasenko, V.E. Lashkaryov Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine;
Sergiy N. Levytskyi, V.E. Lashkaryov Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine;
Toru Aoki, Graduate School of Informatics, Shizuoka University;
Vygantas Mizeikis, Research Institute of Electronics, Shizuoka University;
Sergey V. Gagarsky, ITMO University;
Kateryna S. Zelenska, Taras Shevchenko National University of Kyiv;
Dmytro V. Gnatyuk, Graduate School of Science and Technology, Shizuoka University;
|
|
|
(pp.164
-
169)
Received: May 27, 2015,
Accepted: April 1, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Twin Gas Jet-assisted Pulsed Green Laser Scribing of Sapphire Substrate [DOI: 10.2961/jlmn.2016.02.0006]
|
|
|
X.Z. Xie, School of Eletromechanical Engineering, Guangdong University of Technology;
Z.Q. Luo, School of Eletromechanical Engineering, Guangdong University of Technology;
X. Wei, School of Eletromechanical Engineering, Guangdong University of Technology;
F.L. Zhang, School of Eletromechanical Engineering, Guangdong University of Technology;
W. Hu, School of Eletromechanical Engineering, Guangdong University of Technology;
Q.L. Ren, School of Eletromechanical Engineering, Guangdong University of Technology;
|
|
|
(pp.170
-
178)
Received: May 24, 2015,
Accepted: April 6, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Pulsed Nd³+:YAG Laser Assisted Micro-dimple Formation in Chromium Films under Different Ambient Conditions [DOI: 10.2961/jlmn.2016.02.0007]
|
|
|
V. Ezhilmaran, Department of Mechanical Engineering, Indian Institute of Technology Madras;
L. Vijayaraghavan, Department of Mechanical Engineering, Indian Institute of Technology Madras;
N. J. Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
S. Ganesan, India Pistons Ltd.;
N. K. Cherian, India Pistons Ltd.;
|
|
|
(pp.179
-
184)
Received: May 23, 2015,
Accepted: April 8, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Minimizing Stitching Errors for Large Area Laser Surface Processing [DOI: 10.2961/jlmn.2016.02.0008]
|
|
|
Moises Alberto Ortega Delgado, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
Andrés Fabián Lasagni , Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
|
|
|
(pp.185
-
191)
Received: November 13, 2015,
Accepted: April 11, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
High Density Perforation of Thin Al-Foils with Ultra Short Pulse Lasers in Dependence on the Repetition Rate [DOI: 10.2961/jlmn.2016.02.0009]
|
|
|
Nelli Hambach, Fraunhofer Institute for Laser Technology;
Claudia Hartmann, Fraunhofer Institute for Laser Technology;
Stephan Keller, Fraunhofer Institute for Laser Technology;
Arnold Gillner, Fraunhofer Institute for Laser Technology;
|
|
|
(pp.192
-
198)
Received: May 26, 2015,
Accepted: April 25, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
High Speed Photography of Laser Induced Forward Transfer (LIFT) of Single and Double-layered Transfer Layers for Single Cell Transfer [DOI: 10.2961/jlmn.2016.02.0010]
|
|
|
D. Riester, Fraunhofer Institute for Laser Technology;
J. Budde, Fraunhofer Institute for Laser Technology;
C. Gach, Fraunhofer Institute for Laser Technology;
A. Gillner, Fraunhofer Institute for Laser Technology;
M. Wehner, Fraunhofer Institute for Laser Technology;
|
|
|
(pp.199
-
203)
Received: May 26, 2015,
Accepted: April 25, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Laser Processing of Sub-Wavelength Structures on Sapphire and Alumi-na for Millimeter Wavelength Broadband Anti-Reflection Coatings [DOI: 10.2961/jlmn.2016.02.0011]
|
|
|
Viktor Schütz, Laser Zentrum Hannover e.V.;
Karl Young, School of Physics and Astronomy and Minnesota Institute for Astrophysics, University of Minnesota;
Tomotake Matsumura, Japan Aerospace Exploration Agency (JAXA) - Institute of Space and Astronautical Science (ISAS);
Shaul Hanany, School of Physics and Astronomy and Minnesota Institute for Astrophysics, University of Minnesota;
Jürgen Koch, Laser Zentrum Hannover e.V.;
Oliver Suttmann, Laser Zentrum Hannover e.V.;
Ludger Overmeyer, Laser Zentrum Hannover e.V.;
Qi Wen, School of Physics and Astronomy and Minnesota Institute for Astrophysics, University of Minnesota;
|
|
|
(pp.204
-
209)
Received: January 29, 2016,
Accepted: April 25, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Experimental Investigation of Dimensional Variation in Laser-machined Micro-channels produced in Titanium Alloy [DOI: 10.2961/jlmn.2016.02.0012]
|
|
|
Naveed Ahmed , Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
Saied Darwish , Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
Abdulrahman M. Alahmari, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
|
|
|
(pp.210
-
226)
Received: January 8, 2016,
Accepted: May 12, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Effects of Laser Peening Parameters on Plastic Deformation in Stainless Steel [DOI: 10.2961/jlmn.2016.02.0013]
|
|
|
Miho Tsuyama, Faculty of Science and Engineering, Kinki University;
Yasuteru Kodama, Program in Electronic Engineering, Interdisciplinary Graduate School of Science and Engineering, Kinki University ;
Yukio Miyamoto, Program in Electronic Engineering, Interdisciplinary Graduate School of Science and Engineering, Kinki University ;
Ippei Kitawaki, Program in Electronic Engineering, Interdisciplinary Graduate School of Science and Engineering, Kinki University ;
Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University;
Hitoshi Nakano, Faculty of Science and Engineering, Kinki University;
|
|
|
(pp.227
-
231)
Received: June 5, 2015,
Accepted: May 30, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Processing of Back Surface of Si Wafers With a Pulsed Nd:YAG Laser [DOI: 10.2961/jlmn.2016.02.0014]
|
|
|
Neng Liu , Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), CNRS UMI-3463, Université de Sherbrooke;
Jonathan Vincent, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), CNRS UMI-3463, Université de Sherbrooke;
Khalid Moumanis , Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), CNRS UMI-3463, Université de Sherbrooke;
Jan J. Dubowski, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), CNRS UMI-3463, Université de Sherbrooke;
|
|
|
(pp.232
-
238)
Received: February 25, 2016,
Accepted: May 30, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Isolation Scribing on Hybrid Films for CIGS-Based Solar Cell Using Various Nanosecond Pulsed Laser Wavelengths [DOI: 10.2961/jlmn.2016.02.0015]
|
|
|
Ming-Fei Chen, Department of Mechatronics Engineering, National Changhua University of Education;
Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories;
Ming-Cheng Wang, Department of Mechatronics Engineering, National Changhua University of Education;
Ying-Fang Chen, Department of Mechatronics Engineering, National Changhua University of Education;
|
|
|
(pp.239
-
245)
Received: February 13, 2016,
Accepted: June 9, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Local Photorefractive Modification in Lithium Niobate Using Ultrafast Direct Laser Write Technique [DOI: 10.2961/jlmn.2016.02.0016]
|
|
|
Domas Paipulas, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University;
Ricardas Buivydas, Centre for Micro-Photonics, Swinburne University of Technology;
Saulius Juodkazis, Centre for Micro-Photonics, Swinburne University of Technology;
Vygantas Mizeikis, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University;
|
|
|
(pp.246
-
252)
Received: June 17, 2015,
Accepted: June 13, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Surface Modification of Polystyrene by Femtosecond Laser Irradiation [DOI: 10.2961/jlmn.2016.02.0017]
|
|
|
B. Wang, SIMTech-NTU Joint Laboratory (Precision Machining), Nanyang Technological University;
X. C. Wang, SIMTech-NTU Joint Laboratory (Precision Machining), Nanyang Technological University;
H. Y. Zheng, SIMTech-NTU Joint Laboratory (Precision Machining), Nanyang Technological University;
Y. C. Lam, SIMTech-NTU Joint Laboratory (Precision Machining), Nanyang Technological University;
|
|
|
(pp.253
-
256)
Received: April 20, 2016,
Accepted: June 27, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Picosecond Laser Modification of CIGS Active Layer [DOI: 10.2961/jlmn.2016.02.0018]
|
|
|
Paulius Gečys, Center for Physical Sciences and Technology;
Edgaras Markauskas, Center for Physical Sciences and Technology;
Andrius Žemaitis , Center for Physical Sciences and Technology;
Gediminas Račiukaitis, Center for Physical Sciences and Technology;
|
|
|
(pp.257
-
260)
Received: June 1, 2015,
Accepted: June 29, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
Fabrication and Application of Phase only Holograms for High Power Laser Beam Shaping [DOI: 10.2961/jlmn.2016.02.0019]
|
|
|
Ilya Alexeev, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
Eric Brehm, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
Florian Nendel, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
Johannes Strauß, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
Marcus Baum, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
Michael Schmidt, Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nuremberg;
|
|
|
(pp.261
-
265)
Received: May 22, 2015,
Accepted: July 7, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Influence of Alignment and Dispersion Pattern of Carbon Nanotubes in the Polycarbonate and Polystyrene Matrixes on Laser Cutting Worka-bility [DOI: 10.2961/jlmn.2016.02.0020]
|
|
|
Ayub Karimzad Ghavidel, Department of Mechanical Engineering, Faculty of Engineering, Urmia University;
Mohammadreza Shabgard , Department of Manufacturing Engineering, Tabriz University;
Taher Azdast , Department of Mechanical Engineering, Faculty of Engineering, Urmia University;
|
|
|
(pp.266
-
275)
Received: March 24, 2016,
Accepted: July 11, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
(Technical Communication) Update of EUV Source Development Status for HVM Lithography [DOI: 10.2961/jlmn.2016.02.0021]
|
|
|
Hakaru Mizoguchi, Gigaphoton Inc.;
Krzysztof M Nowak, Gigaphoton Inc.;
Hiroaki Nakarai, Gigaphoton Inc.;
Tamotsu Abe, Gigaphoton Inc.;
Takeshi Ohta, Gigaphoton Inc.;
Yasufumi Kawasuji, Gigaphoton Inc.;
Hiroshi Tanaka, Gigaphoton Inc.;
Yukio Watanabe, Gigaphoton Inc.;
Tsukasa Hori, Gigaphoton Inc.;
Takeshi Kodama, Gigaphoton Inc.;
Yutaka Shiraishi, Gigaphoton Inc.;Tatsuya Yanagida, Gigaphoton Inc.; Tsuyoshi Yamada, Gigaphoton Inc.;Taku Yamazaki, Gigaphoton Inc.; Shinji Okazaki, Gigaphoton Inc.; Takashi Saitou, Gigaphoton Inc.;
|
|
|
(pp.276
-
284)
Received: April 4, 2014,
Accepted: May 2, 2016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
