|  |  | 
  
    
      | Latest Articles |  
      |  | ISSN 1880-0688 |  |  
      |  | DOI prefix 10.2961 
  
 Click on "PDF" to download the full-text article in PDF format.
 |  |  
      |  | 
 |  |  
      |  |  Vol.20, No.2 (August, 2025) |  |  
      |  | 
              
                
                  |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 01 |  | Optical Properties of Carbon Nanoparticles by Laser Ablation in 
Nonionic Surfactant Aqueous Solution 
 [10.2961/jlmn.2025.02.2001] |  
      |  |  | Taichi Okumura, School of Materials and Chemical Technology, Institute of Science Tokyo;
        
        
        
        
        Hiroyuki Wada, School of Materials and Chemical Technology, Institute of Science Tokyo; |  
      |  |  | (pp.82
        -
        89)
        Received: November 18, 2024,
        Accepted: March 24, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 02 |  | Temperature Field Simulation and Process Parameter Optimization of 
Fiber Laser Assisted Turning Alumina Ceramics 
 [10.2961/jlmn.2025.02.2002] |  
      |  |  | Caizhou Xin, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Haiyun Zhang, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Zhiguo Geng, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Yanan Guo, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Zengbo Zhang, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Jinjian Zhang, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Xu  Miao, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Yugang Zhao, School of Mechanical Engineering, Shandong University of Technology;
        
        
        
        
        Xingang Han, School of Mechanical Engineering, Shandong University of Technology; |  
      |  |  | (pp.90
        -
        101)
        Received: November 18, 2024,
        Accepted: April 30, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 03 |  | AI-Supported Prediction of Femtosecond Laser  
Micromachining Parameters
[10.2961/jlmn.2025.02.2003] |  
      |  |  | Céline Petit , Lasea;
        
        
        
        
        Nathanaël Mariaule, SAGACIFY;
        
        
        
        
        Sven Wauters, SAGACIFY;
        
        
        
        
        Arnaud de Decker, SAGACIFY;
        
        
        
        
        David Bruneel, Lasea; |  
      |  |  | (pp.102
        -
        113)
        Received: June 29, 2024,
        Accepted: May 17, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 04 |  | Environmentally Friendly Production of Cellulose Nanofibers  
Using Laser-Assisted Lignocellulose Decomposition 
[10.2961/jlmn.2025.02.2004] |  
      |  |  | Leo Adachi, Institute of Science Tokyo;
        
        
        
        
        Shuhei Yamada, Institute of Science Tokyo;
        
        
        
        
        Shun-ichi Ishiuchi, Institute of Science Tokyo;
        
        
        
        
        Hiroyuki Wada, Institute of Science Tokyo; |  
      |  |  | (pp.114
        -
        118)
        Received: November  6, 2024,
        Accepted: April 30, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 05 |  | Progress in Laser Inscription in Semiconductors by Multiphoton- 
Initiated Nanosecond Infrared Pulse Absorption
[10.2961/jlmn.2025.02.2005] |  
      |  |  | Pol Sopeña, Aix-Marseille Université;
        
        
        
        
        Niladri Ganguly, Aix-Marseille Université;
        
        
        
        
        Gabriel Spühler, Glucoloop AG;
        
        
        
        
        Andrei Selivanau, Glucoloop AG;
        
        
        
        
        David Grojo, Aix-Marseille Université; |  
      |  |  | (pp.119
        -
        126)
        Received: April  1, 2025,
        Accepted: July 20, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 06 |  | Strategy for Wettability Modification Through High-Aspect Ratio Texturing Using Picosecond Direct Laser Interference  Patterning 
 [10.2961/jlmn.2025.02.2006] |  
      |  |  | Fabian Ränke, Institute of Manufacturing Technology, Technische Universität Dresden;
        
        
        
        
        Marcelo Sallese, Institute of Manufacturing Technology, Technische Universität Dresden;
        
        
        
        
        Marcos Soldera, Institute of Manufacturing Technology, Technische Universität Dresden;
        
        
        
        
        Mayla Barrientos, Institute of Manufacturing Technology, Technische Universität Dresden;
        
        
        
        
        Agustin Götte, Institute of Manufacturing Technology, Technische Universität Dresden;
        
        
        
        
        Andrés F. Lasagni, Institute of Manufacturing Technology, Technische Universität Dresden; |  
      |  |  | (pp.127
        -
        138)
        Received: June  4, 2025,
        Accepted: July 24, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 07 |  | Acoustic Signature Measurement to Identify Laser-Induced Breakdown 
in Water during Laser Shock Peening 
 [10.2961/jlmn.2025.02.2007] |  
      |  |  | Marek Böhm, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences;
        
        
        
        
        Josef Blažej, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague;
        
        
        
        
        Ondřej Stránský, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences;
        
        
        
        
        Jan Kaufman, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences;
        
        
        
        
        Jan Brajer, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences;
        
        
        
        
        Sunil Pathak, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences;
        
        
        
        
        Tomáš Mocek, HiLASE Centre, Institute of Physics of the Czech Academy of Sciences; |  
      |  |  | (pp.139
        -
        145)
        Received: December  4, 2024,
        Accepted: June 29, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 08 |  | Laser Texturing of Soda-Lime Glass Surfaces with Extreme Wettability Contrast
[10.2961/jlmn.2025.02.2008] |  
      |  |  | Marcos Soldera, Institute of Manufacturing, Technische Universität Dresden;
        
        
        
        
        Fabian Ränke, Institute of Manufacturing, Technische Universität Dresden;
        
        
        
        
        Andrés Fabián Lasagni, Institute of Manufacturing, Technische Universität Dresden; |  
      |  |  | (pp.146
        -
        154)
        Received: May 23, 2025,
        Accepted: August  3, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 09 |  | Preparation of YAG:Ce Nanoparticles by Laser Ablation in Liquid and 
Demonstration of White Light Emitting Diode
[10.2961/jlmn.2025.02.2009] |  
      |  |  | Kenichi Watanabe, Institute of Science Tokyo;
        
        
        
        
        Hiroyuki Wada, Institute of Science Tokyo; |  
      |  |  | (pp.155
        -
        159)
        Received: June 12, 2025,
        Accepted: August 15, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 10 |  | Formation Mechanisms of Nanostructures by Nanosecond 
Laser Ablation of Multi-component Amorphous Alloys in Water
 [10.2961/jlmn.2025.02.2010] |  
      |  |  | S. Yaginuma, National Institute of Technology (KOSEN);
        
        
        
        
        R. Ninomiya, Graduate School of Natural Science and Technology, Kanazawa University;
        
        
        
        
        D. V. Louzguine-Luzgin, Advanced Institute for Materials Research (WPI-AIMR), Tohoku University;
        
        
        
        
        K. Oshida, Institute for Aqua Regeneration, Shinshu University;
        
        
        
        
        X. Fang, School of Electronics and Computer Science, University of Southampton;
        
        
        
        
        K. Ishikawa, Graduate School of Natural Science and Technology, Kanazawa University;
        
        
        
        
        Y. Miyajima, Graduate School of Natural Science and Technology, Kanazawa University; |  
      |  |  | (pp.160
        -
        165)
        Received: June 30, 2025,
        Accepted: August 29, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 11 |  | Ultra-Thin Glass Hybrid Cutting by Ultrashort Pulsed Laser Robot
[10.2961/jlmn.2025.02.2011] |  
      |  |  | Yongting Yang, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
        
        
        
        
        Daniel Franz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
        
        
        
        
        Cemal Esen, Applied Laser Technologies, Ruhr University Bochum;
        
        
        
        
        Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; |  
      |  |  | (pp.166
        -
        172)
        Received: June  5, 2025,
        Accepted: August 31, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
      |  |  |  |  
      |  |  | 
 |  
      | 12 |  | Effects of Pulse Accumulation on Femtosecond-Laser-Induced Periodic 
Surface Structures in Si and SiC
[10.2961/jlmn.2025.02.2012] |  
      |  |  | Kohei Chigusa, Graduate School of Science and Technology for Innovation, Tokushima University;
        
        
        
        
        Kaito Fukuda, Graduate School of Science and Technology for Innovation, Tokushima University;
        
        
        
        
        Tatsuya Okada, Graduate School of Science and Technology for Innovation, Tokushima University;
        
        
        
        
        Takuro Tomita, Graduate School of Science and Technology for Innovation, Tokushima University; |  
      |  |  | (pp.173
        -
        179)
        Received: June  5, 2025,
        Accepted: August 31, 2025 |  
      |  |  |   |  
      |  |  | 
 |  
                  |  |  |  |  
                  |  |  | 
 |  |  |  |  |