Current Issue
ISSN 1880-0688
DOI prefix 10.2961
Crossref logo

Click on "PDF" to download the full-text article in PDF format.

markVol.15, No.3 (December, 2020)


01
Glass Welding with Ultrashort Laser Pulses Producing mm-long Filaments [DOI: 10.2961/jlmn.2020.03.2001]
Dirk Nodop, ifw Jena - Günter-Köhler-Institut für Fügetechnik und Werkstoffprüfung GmbH; Paul Wiemuth, Friedrich Schiller University of Jena, Otto-Schott-Institute of Materials Research; Jan Rücker, ifw Jena - Günter-Köhler-Institut für Fügetechnik und Werkstoffprüfung GmbH; Martin Kahle, ifw Jena - Günter-Köhler-Institut für Fügetechnik und Werkstoffprüfung GmbH;
(pp.164 - 168) Received: June 26, 2020, Accepted: September 24, 2020
pdfr


02
Fundamentals of a New Sub-Diffraction Direct Laser Writing Method by a Combination of Stimulated Emission Depletion and Excited State Absorption [DOI: 10.2961/jlmn.2020.03.2002]
Christoph Wenisch, Otto Schott Institute of Materials Research (OSIM), Friedrich Schiller University Jena; Sebastian Engel, Otto Schott Institute of Materials Research (OSIM), Friedrich Schiller University Jena; Stephan Gräf , Otto Schott Institute of Materials Research (OSIM), Friedrich Schiller University Jena; Frank A. Müller, Otto Schott Institute of Materials Research (OSIM), Friedrich Schiller University Jena;
(pp.169 - 173) Received: June 25, 2020, Accepted: October 5, 2020
pdfr


03
Selective Laser Thermoregulation System for Accelerated Deg-radation Test of SiC/SiC CMCs [DOI: 10.2961/jlmn.2020.03.2003]
Hayato Koshiji, Graduate School of Engineering, Tokyo University of Technology; Tomomasa Ohkubo, Graduate School of Engineering, Tokyo University of Technology; Kenji Azato, Department of Mechanical Engineering, Tokyo University of Technology; Yuki Kameda, Department of Mechanical Engineering, Tokyo University of Technology; Ei-ichi Matsunaga, Department of Mechanical Engineering, Tokyo University of Technology; Takumi Dobashi, Department of Mechanical Engineering, Tokyo University of Technology; Naohiro Shichijo, Department of Computer Science, Tokyo University of Technology; Ken Goto, Japan Aerospace Exploration Agency; Mitsuhiko Sato, Katayanagi Institute, Tokyo University of Technology; Chikara Fujiwara, Katayanagi Institute, Tokyo University of Technology; Yutaka Kagawa, Katayanagi Institute, Tokyo University of Technology;
(pp.174 - 177) Received: June 26, 2020, Accepted: October 5, 2020
pdfr


04
Homogeneous Intensity within the Rayleigh Length and Enhanced Depth of Focus for Gaussian Beams [DOI: 10.2961/jlmn.2020.03.2004]
Christian Bischoff, Topag Lasertechnik GmbH; Erwin Jäger, Topag Lasertechnik GmbH; Udo Umhofer, Topag Lasertechnik GmbH; Andrés Fabián Lasagni, Institut für Fertigungstechnik, Technische Universität Dresden; Friedemann Völklein, Institut für Mikrotechnologien, Hochschule RheinMain;
(pp.178 - 185) Received: June 26, 2020, Accepted: October 5, 2020
pdfr


05
UV Direct Laser Interference Patterning of Diffraction Gratings in Poly-Hydroxyethyl-Methacrylate Ophthalmic Polymers [DOI: 10.2961/jlmn.2020.03.2005]
Daniel Sola, Institut für Fertigungstechnik, Technische Universität Dresden; Sabri Alamri, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS; Andrés F. Lasagni, Institut für Fertigungstechnik, Technische Universität Dresden;
(pp.186 - 190) Received: June 22, 2020, Accepted: October 8, 2020
pdfr


06
Drilling of CFRP with Reduced and Non-Directional Heat-Affected Zone by Using 3-kW CW Single-Mode Fiber Laser [DOI: 10.2961/jlmn.2020.03.2006]
Yuya Takubo, Optical Technologies R&D Center; Daisuke Sekine, Optical Technologies R&D Center; Junji Sato, Optical Technologies R&D Center; Keisuke Uchiyama, Optical Technologies R&D Center; Shinya Ikoma , Optical Technologies R&D Center; Yoshio Umeda, Optical Technologies R&D Center;
(pp.191 - 194) Received: June 25, 2020, Accepted: October 8, 2020
pdfr


07
Deep Drilling of Structural Timber with High Power Ultrashort Pulsed Laser Radiation [DOI: 10.2961/jlmn.2020.03.2007]
Benedikt Bornschlegel, Chair for Laser Technology LLT, RWTH Aachen University; Dennis Haasler, Chair for Laser Technology LLT, RWTH Aachen University; Johannes Finger, Fraunhofer Institute for Laser Technology ILT; Denis Grizmann, Chair of Structures and Structural Design TRAKO, RWTH Aachen University; Martin Trautz, Chair of Structures and Structural Design TRAKO, RWTH Aachen University; Arnold Gillner, Chair for Laser Technology LLT, RWTH Aachen University;
(pp.195 - 203) Received: June 26, 2020, Accepted: October 13, 2020
pdfr


08
High Speed Soldering Using Laser Printing for the Assembly of Electronic Components [DOI: 10.2961/jlmn.2020.03.2008]
M. Makrygianni, National Technical University of Athens, Physics Department; E. Margariti, National Technical University of Athens, Physics Department; K. Andritsos, National Technical University of Athens, Physics Department; D. Reppas, Prisma Electronics SA; F. Zacharatos, National Technical University of Athens, Physics Department; N. Oikonomidis, Prisma Electronics SA; Ch. Spandonidis, Prisma Electronics SA; I. Zergioti, National Technical University of Athens, Physics Department;
(pp.204 - 208) Received: June 27, 2020, Accepted: October 13, 2020
pdfr


09
Dual Process Strategy to Increase the Usable Power for Laser-Milling [DOI: 10.2961/jlmn.2020.03.2009]
Fabian Nyenhuis, Robert Bosch GmbH, Bosch Research; Andreas Michalowski, Robert Bosch GmbH, Bosch Research; Johannes L'huillier, Photonik-Zentrum Kaiserslautern e.V.;
(pp.209 - 213) Received: June 25, 2020, Accepted: October 19, 2020
pdfr


10
Effective Time of Nanogratings Formation on Sol-Gel Films by Two-Beam Laser Interference [DOI: 10.2961/jlmn.2020.03.2010]
Maksim M. Sergeev, ITMO University; Roman A. Zakoldaev ; Vladislav R. Gresko, ITMO University;
(pp.214 - 219) Received: July 16, 2020, Accepted: October 19, 2020
pdfr


11
High Throughput Laser Drilling with High Power Lasers Using a Two-Dimensional Polygon Mirror Scanner [DOI: 10.2961/jlmn.2020.03.2011]
Florian Rößler, MOEWE Optical Solutions GmbH; Mathias Müller, Laserinstitut Hochschule Mittweida; André Streek, MOEWE Optical Solutions GmbH;
(pp.220 - 227) Received: June 23, 2020, Accepted: October 30, 2020
pdfr


12
Beam Shaping and Power Handling of an Spatial Light Modulator System for Laser Induced Periodic Surface Structuring Texturation [DOI: 10.2961/jlmn.2020.03.2012]
Julien Dupuy, Multitel a.s.b.l, Parc Initialis; Hendrik Von Horsten, Multitel a.s.b.l, Parc Initialis; Marc Lamblin , Multitel a.s.b.l, Parc Initialis; Yves Hernandez, Multitel a.s.b.l, Parc Initialis;
(pp.228 - 231) Received: June 24, 2020, Accepted: October 30, 2020
pdfr


13
Improved Efficiency of an Adaptive Beam-Shaping Technique Based on Phase Gratings and Spatial Frequency Filtering [DOI: 10.2961/jlmn.2020.03.2013]
Yoshiki Nakata, Institute of Laser Engineering, Osaka University; Yuto Hirakawa, Institute of Laser Engineering, Osaka University; Tsubasa Morizuka, Institute of Laser Engineering, Osaka University; Yuki Kosaka, Institute of Laser Engineering, Osaka University; Noriaki Miyanaga, Institute for Laser Technology; Kazuhito Osawa, Murata Manufacturing Co., Ltd.;
(pp.232 - 235) Received: July 16, 2020, Accepted: November 10, 2020
pdfr


14
Femtosecond Laser Ablation in Burst Mode as a Function of Pulse Fluence and Intra-Burst Repetition Rate [DOI: 10.2961/jlmn.2020.03.2014]
Norman Hodgson, Coherent, Inc.; Hortense Allegre, Coherent, Inc.; Andrei Starodoumov, Coherent, Inc.; Skip Bettencourt, Coherent, Inc.;
(pp.236 - 244) Received: July 17, 2020, Accepted: November 13, 2020
pdfr


15
Comparative Study of Ultraviolet and Infrared Femtosecond Laser Irra-diation on Textile Polymers PET and PA66 [DOI: 10.2961/jlmn.2020.03.2015]
Erieta-Katerina Koussi, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien; Hyeon Jin Jung, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien; Nicolas Faure, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien; Christophe Donnet, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien; Cyril Mauclair, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien; Xxx Sedao, Université de Lyon, Université Jean Monnet - Saint-Etienne, CNRS, Institute of Optics Graduate School, Laboratoire Hubert Curien;
(pp.245 - 251) Received: June 26, 2020, Accepted: December 2, 2020
pdfr


16
Gradient and Core-Cladding Waveguides Fabrication in Porous Glass [DOI: 10.2961/jlmn.2020.03.2016]
Julia V. Mikhailova, ITMO University; Zhong Lijing, ITMO University; Andrey A. Ostanin, ITMO University; Maksim M. Sergeev, ITMO University; Roman A. Zakoldaev, ITMO University;
(pp.252 - 256) Received: July 2, 2020, Accepted: December 2, 2020
pdfr


17
Dimensionless Enthalpy as Characteristic Factor for Process Control in Laser Powder Bed Fusion [DOI: 10.2961/jlmn.2020.03.2017]
Theresa Hanemann, EOS Electro Optical Systems GmbH; Christoph Seyfert, EOS Electro Optical Systems GmbH; Peter Holfelder, EOS Electro Optical Systems GmbH; Astrid Rota, EOS Electro Optical Systems GmbH; Martin Heilmaier, Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT);
(pp.257 - 266) Received: June 26, 2020, Accepted: December 9, 2020
pdfr


↑page top