|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.7, No.2 (May, 2012) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
Self-organized Nano-cone Arrays in InP/InGaAs/InGaAsP Microstructures by Irradiation with ArF and KrF Excimer Laser [DOI: 10.2961/jlmn.2012.02.0001]
|
|
|
Neng Liu, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Université de Sherbrooke ;
Khalid Moumanis, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Université de Sherbrooke ;
Jan J. Dubowski, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Department of Electrical and Computer Engineering, Université de Sherbrooke ;
|
|
|
(pp.130
-
136)
Received: September 14, 2011,
Accepted: February 15, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Effect of Pulse Interval on TSV Process using a Picosecond Laser [DOI: 10.2961/jlmn.2012.02.0002]
|
|
|
Dongsig Shin, Korea Institute of Machinery & Materials;
Jeong Suh, Korea Institute of Machinery & Materials;
Yongkwon Cho, Korea Institute of Machinery & Materials;
|
|
|
(pp.137
-
142)
Received: September 27, 2011,
Accepted: February 15, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Application of Gaussian Optical Tweezers for Ultrafast Laser Assisted Direct–write Nanostructuring [DOI: 10.2961/jlmn.2012.02.0003]
|
|
|
Ulf Quentin, Chair of Photonic Technologies, University of Erlangen-Nuremberg;
Karl-Heinz Leitz, Chair of Photonic Technologies, University of Erlangen-Nuremberg;
Ilya Alexeev, Chair of Photonic Technologies, University of Erlangen-Nuremberg;
Michael Schmidt, Chair of Photonic Technologies, University of Erlangen-Nuremberg;
|
|
|
(pp.143
-
146)
Received: June 3, 2011,
Accepted: March 7, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Surface Modifications of Metals Induced by Soft X-Ray Laser Pulse Irradiations [DOI: 10.2961/jlmn.2012.02.0004]
|
|
|
Masahiko Ishino, Quantum Beam Directorate, Japan Atomic Energy Agency;
Anatoly Ya. Faenov, Quantum Beam Directorate, Japan Atomic Energy Agency;
Momoko Tanaka, Quantum Beam Directorate, Japan Atomic Energy Agency;
Noboru Hasegawa, Quantum Beam Directorate, Japan Atomic Energy Agency;
Masaharu Nishikino, Quantum Beam Directorate, Japan Atomic Energy Agency;
Satoshi Tamotsu, Graduate School of Humanities and Science, Nara Women’s University;
Tatiana A. Pikuz, Quantum Beam Directorate, Japan Atomic Energy Agency;
Toshiyuki Ohba, Quantum Beam Directorate, Japan Atomic Energy Agency;
Takeshi Kaihori, Quantum Beam Directorate, Japan Atomic Energy Agency;
Tetsuya Kawachi, Quantum Beam Directorate, Japan Atomic Energy Agency;
|
|
|
(pp.147
-
151)
Received: June 3, 2011,
Accepted: March 8, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Surface Texturing with Laser Micro Cladding to Improve Tribological Properties [DOI: 10.2961/jlmn.2012.02.0005]
|
|
|
Nerea Otero, AIMEN Technology Centre, Laser Applications Centre (CAL);
Pablo Romero, AIMEN Technology Centre, Laser Applications Centre (CAL);
Alejandro Gonzalez, AIMEN Technology Centre, Laser Applications Centre (CAL);
Alessandra Scano, AIN;
|
|
|
(pp.152
-
157)
Received: June 2, 2011,
Accepted: March 27, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Application of Femtosecond Laser Peen Forming to Sheet Metal Bending [DOI: 10.2961/jlmn.2012.02.0006]
|
|
|
Yoshihiro Sagisaka, Industrial Research Institute of Shizuoka Prefecture;
Masayoshi Kamiya, Fuji Technical Support Center, Industrial Research Institute of Shizuoka Prefecture;
Minoru Matsuda, The Shizuoka Organization for Creation of Industries;
Yukihiro Ohta, Hamamatsu Technical Support Center, Industrial Research Institute of Shizuoka Prefecture;
|
|
|
(pp.158
-
163)
Received: December 1, 2011,
Accepted: March 27, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Formation Mechanism of Nanostructures on the Stainless Steel Surface by Femtosecond Laser Pulses [DOI: 10.2961/jlmn.2012.02.0007]
|
|
|
Md. Shamim Ahsan, Photonics Application Lab, Korea Advanced Institute of Science and Technology (KAIST);
Yeong Gyu Kim, Photonics Application Lab, Korea Advanced Institute of Science and Technology (KAIST);
Man Seop Lee, Photonics Application Lab, Korea Advanced Institute of Science and Technology (KAIST);
|
|
|
(pp.164
-
170)
Received: May 12, 2011,
Accepted: March 29, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Writing Speed Dependency of Femtosecond Laser Refractive Index Modification in Poly(dimethylsiloxane) [DOI: 10.2961/jlmn.2012.02.0008]
|
|
|
Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology;
Katsumi Matsuda, Production Method Development Group, Omron Corporation;
Satoshi Hirono, Production Method Development Group, Omron Corporation;
Hiroyuki Mochizuki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology;
|
|
|
(pp.171
-
175)
Received: May 21, 2011,
Accepted: April 3, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Laser Short-Pulse Heating: Influence of Spatial Distribution of Absorption Coefficient on Temperature Field in Silicon Film [DOI: 10.2961/jlmn.2012.02.0009]
|
|
|
S. B. Mansoor, Mechanical Engineering Department, King Fahd University of Petroleum & Minerals;
B. S. Yilbas, Mechanical Engineering Department, King Fahd University of Petroleum & Minerals;
|
|
|
(pp.176
-
188)
Received: January 17, 2011,
Accepted: April 5, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Laser Irradiation on Tin Electroplating and Whisker Suppressibility [DOI: 10.2961/jlmn.2012.02.0010]
|
|
|
Makoto Hino, Industrial Technology Research Institute of Okayama Prefecture;
Yutaka Mitooka, Industrial Technology Research Institute of Okayama Prefecture;
Koji Murakami, Industrial Technology Research Institute of Okayama Prefecture;
Masao Takamizawa, OM Sangyo Co.,Ltd.;
Teruto Kanadani, Okayama University of Science;
|
|
|
(pp.189
-
193)
Received: May 17, 2011,
Accepted: April 5, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Periodic Nano-Grating Structures Produced by Femtosecond Laser Pulses for Metals with Low- and High-Melting Points [DOI: 10.2961/jlmn.2012.02.0011]
|
|
|
Masaki Hashida, Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
Yasuhiro Miyasaka, Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
Yoshinobu Ikuta, Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
Kazuto Otani , Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
Shigeki Tokita , Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
Shuji Sakabe , Advanced Research Center for Beam Science, Institute for Chemical Research, Kyoto University;
|
|
|
(pp.194
-
197)
Received: July 14, 2011,
Accepted: April 12, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Nanostructuring of Silicon Surface with Femtosecond-Laser-Induced Near-field [DOI: 10.2961/jlmn.2012.02.0012]
|
|
|
Godai Miyaji, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University;
Kaifeng Zhang, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University;
Junya Fujita, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University;
Kenzo Miyazaki, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University;
|
|
|
(pp.198
-
201)
Received: June 29, 2011,
Accepted: April 16, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Femtosecond Laser Induced Nanostructures in Soda-lime Glass [DOI: 10.2961/jlmn.2012.02.0013]
|
|
|
Md. Shamim Ahsan, Photonics Application Lab, Korea Advanced Institute of Science and Technology (KAIST);
Man Seop Lee, Photonics Application Lab, Korea Advanced Institute of Science and Technology (KAIST);
|
|
|
(pp.202
-
207)
Received: May 11, 2011,
Accepted: April 16, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Multiple Beam Internal Structuring of Poly(methyl methacrylate) [DOI: 10.2961/jlmn.2012.02.0014]
|
|
|
Dun Liu, Laser Group, Department of Engineering, University of Liverpool;
Walter Perrie, Laser Group, Department of Engineering, University of Liverpool;
Zheng Kuang, Laser Group, Department of Engineering, University of Liverpool;
P. J. Scully, Photon Science Institute, University of Manchester;
A. Baum, Photon Science Institute, University of Manchester;
S. Liang, Photon Science Institute, University of Manchester;
A. Taranu, Photon Science Institute, University of Manchester;
S. P. Edwardson, Laser Group, Department of Engineering, University of Liverpool;
E. Fearon, Laser Group, Department of Engineering, University of Liverpool;
G. Dearden, Laser Group, Department of Engineering, University of Liverpool;
K. G. Watkins, Laser Group, Department of Engineering, University of Liverpool;
|
|
|
(pp.208
-
211)
Received: June 17, 2010,
Accepted: April 17, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
Effect of Femtosecond-laser Irradiation on Magnetic and Optical Properties in Au- and Fe-doped Transparent Glass [DOI: 10.2961/jlmn.2012.02.0015]
|
|
|
Seisuke Nakashima, Advanced Science Institute, RIKEN;
Koji Sugioka, Advanced Science Institute, RIKEN;
Katsumi Midorikawa, Advanced Science Institute, RIKEN;
Kohki Mukai, Yokohama National University;
|
|
|
(pp.212
-
216)
Received: July 26, 2011,
Accepted: April 24, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Comparison Between Plasma Properties And Damage Thresholds In Doped Silica Exposed To IR Temtosecond Laser [DOI: 10.2961/jlmn.2012.02.0016]
|
|
|
M. Lancry, EPCES/ICMMO, UMR CNRS-UPS 8182, Université Paris Sud 11;
B. Poumellec, EPCES/ICMMO, UMR CNRS-UPS 8182, Université Paris Sud 11;
S. Guizard, Laboratoire des Solides Irradiés/CEA IRAMIS, Ecole Polytechnique;
|
|
|
(pp.217
-
225)
Received: July 27, 2011,
Accepted: May 5, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
(Technical Communication) Continuous Laser Fabrication Method using Adaptive Cell Decomposition [DOI: 10.2961/jlmn.2012.02.0017]
|
|
|
Kwangho Yoon, Dept. of High Density Energy Beam Processing & System, KIMM;
Kyunghan Kim, Dept. of High Density Energy Beam Processing & System, KIMM;
Jaehoon Lee, Dept. of High Density Energy Beam Processing & System, KIMM;
|
|
|
(pp.226
-
230)
Received: June 7, 2011,
Accepted: March 15, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
(Technical Communication) Laser Scanner-Stage Synchronization Method for High-Speed And Wide-Area Fabrication [DOI: 10.2961/jlmn.2012.02.0018]
|
|
|
Kyunghan Kim, Dept. of High Density Energy Beam Processing & System, Korea Institute of Machinery & Materials ;
Kwangho Yoon, Dept. of High Density Energy Beam Processing & System, Korea Institute of Machinery & Materials ;
Jeong Suh, Dept. of High Density Energy Beam Processing & System, Korea Institute of Machinery & Materials ;
Jaehoon Lee, Dept. of High Density Energy Beam Processing & System, Korea Institute of Machinery & Materials ;
|
|
|
(pp.231
-
235)
Received: July 8, 2011,
Accepted: April 11, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
