|
|
 |
| Archive |
|
ISSN 1880-0688 |
|
|
Click on "PDF" to download the full-text article in PDF format. |
|
|
|
|
|
 Vol.7, No.1 (February, 2012) |
|
|
|
|
|
|
|
|
|
|
|
|
01
|
|
(Invited Paper) The Femtoprint Project [DOI: 10.2961/jlmn.2012.01.0001]
|
|
|
Y. Bellouard, Mechanical Engineering Department, Eindhoven University of Technology;
A. Champion, Mechanical Engineering Department, Eindhoven University of Technology; B. Lenssen, Mechanical Engineering Department, Eindhoven University of Technology; M. Matteucci, Mechanical Engineering Department, Eindhoven University of Technology; A. Schaap, Mechanical Engineering Department, Eindhoven University of Technology;
M. Beresna, Optoelectronics Research Center (ORC), University of Southampton; C. Corbari, Optoelectronics Research Center (ORC), University of Southampton; M. Gecevičius, Optoelectronics Research Center (ORC), University of Southampton; P. Kazansky, Optoelectronics Research Center (ORC), University of Southampton;
O. Chappuis, LSRO, Ecole Polytechnique Fédérale de Lausanne; M. Kral, LSRO, Ecole Polytechnique Fédérale de Lausanne; R. Clavel, LSRO, Ecole Polytechnique Fédérale de Lausanne;
F. Barrot, Centre Suisse d’Electronique et Microtechnique (CSEM); J.-M. Breguet, Centre Suisse d’Electronique et Microtechnique (CSEM);
Y. Mabillard, Mecartex; S. Bottinelli, Mecartex;
M. Hopper, Quintenz Hybridtechnik;
C. Hoenninger, Amplitude Systèmes; E. Mottay, Amplitude Systèmes;
J. Lopez, AlphaNOV;
|
|
|
(pp.1
-
10)
Received: August 3, 2011,
Accepted: December 26, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
02
|
|
Two-Photon Fabrication of Three-Dimensional Metallic Nanostructures for Plasmonic Metamaterials [DOI: 10.2961/jlmn.2012.01.0002]
|
|
|
Atsushi Ishikawa, Metamaterials Laboratory, RIKEN;
Takuo Tanaka, Research Inst. for Electronic Science, Hokkaido University;
|
|
|
(pp.11
-
15)
Received: June 7, 2011,
Accepted: December 9, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
03
|
|
Electrical Conduction Properties of SiC Modified by Femtosecond Laser [DOI: 10.2961/jlmn.2012.01.0003]
|
|
|
Takuto Ito, Department of Ecosystem Engineering, The University of Tokushima;
Manato Deki, Department of Ecosystem Engineering, The University of Tokushima;
Takuro Tomita, Department of Ecosystem Engineering, The University of Tokushima;
Shigeki Matsuo, Department of Ecosystem Engineering, The University of Tokushima;
Shuichi Hashimoto, Department of Ecosystem Engineering, The University of Tokushima;
Takahiro Kitada, Center of Frontier Research of Engineering, The University of Tokushima;
Toshiro Isu, Center of Frontier Research of Engineering, The University of Tokushima;
Shinobu Onoda, Japan Atomic Energy Agency;
Takeshi Ohshima, Japan Atomic Energy Agency;
|
|
|
(pp.16
-
20)
Received: June 7, 2011,
Accepted: December 12, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04
|
|
Nanocomposite Fibre Fabrication via in situ Monomer Grafting and Bonding on Laser-generated Nanoparticles [DOI: 10.2961/jlmn.2012.01.0004]
|
|
|
D. D. van ’t Zand , Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen;
P. Nachev, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University;
R. Rosenfeld, Laser Zentrum Hannover e.V.;
P. Wagener, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen;
A. Pich, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University;
D. Klee, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University;
S. Barcikowski, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen;
|
|
|
(pp.21
-
27)
Received: June 3, 2011,
Accepted: December 14, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05
|
|
Fabrication of Transparent and Conductive Microdevices [DOI: 10.2961/jlmn.2012.01.0005]
|
|
|
Szabolcs Beke, Advanced Science Institute, RIKEN;
László Kőrösi, Supramolecular and Nanostructured Materials Research Group of the Hungarian Academy of Sci-ences, University of Szeged;
Koji Sugioka, Advanced Science Institute, RIKEN;
Katsumi Midorikawa, Advanced Science Institute, RIKEN;
|
|
|
(pp.28
-
32)
Received: June 16, 2011,
Accepted: December 19, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06
|
|
Scribing of Thin-Film Solar Cells with Picosecond and Femtosecond Lasers [DOI: 10.2961/jlmn.2012.01.0006]
|
|
|
Paulius Gecys, Center for Physical Sciences and Technology;
Gediminas Raciukaitis, Center for Physical Sciences and Technology;
Anja Wehrmann, Leibniz-Institute of Surface Modification;
Klaus Zimmer, Leibniz-Institute of Surface Modification;
Alexander Braun, Solarion AG;
Steffen Ragnow, Solarion AG;
|
|
|
(pp.33
-
37)
Received: June 7, 2011,
Accepted: December 20, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07
|
|
Laser Processing of Tungsten Powder with Femtosecond Laser Radiation [DOI: 10.2961/jlmn.2012.01.0007]
|
|
|
Robby Ebert, University of Applied Science, Laser Institute;
Frank Ullmann, University of Applied Science, Laser Institute;
Dorena Hildebrandt, University of Applied Science, Laser Institute;
Joerg Schille, University of Applied Science, Laser Institute;
Lars Hartwig, University of Applied Science, Laser Institute;
Sascha Kloetzer, University of Applied Science, Laser Institute ;
Andre Streek, University of Applied Science, Laser Institute;
Horst Exner, University of Applied Science, Laser Institute;
|
|
|
(pp.38
-
43)
Received: June 7, 2010,
Accepted: December 21, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
08
|
|
Using Laser Microfabrication to Write Conductive Polymer/SWNTs Nanocomposites[DOI:10.2961/jlmn.2012.01.0008]
|
|
|
Qingchuan Guo, Ruhr-University Bochum, Laser Applications Technology;
Shizhou Xiao, Ruhr-University Bochum, Laser Applications Technology;
Andreas Aumann, Ruhr-University Bochum, Laser Applications Technology;
Matthias Jaeger, Ruhr-University Bochum, Laser Applications Technology;
M’Barek Chakif, Ruhr-University Bochum, Laser Applications Technology;
Reza Ghadiri, Ruhr-University Bochum, Laser Applications Technology;
Cemal Esen, Ruhr-University Bochum, Laser Applications Technology;
Mingyan Ma, Ruhr-University Bochum, Inorganic Chemistry I;
Andreas Ostendorf, Ruhr-University Bochum, Laser Applications Technology;
|
|
|
(pp.44
-
48)
Received: June 17, 2011,
Accepted: December 21, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09
|
|
Laser Induced Graphite Oxide/Graphene Transformation [DOI:10.2961/jlmn.2012.01.0009]
|
|
|
Romualdas Trusovas, Department of Laser Technologies, Center for Physical Sciences and Technology;
Gediminas Račiukaitis, Department of Laser Technologies, Center for Physical Sciences and Technology;
Jurgis Barkauskas, Faculty of Chemistry, Vilnius University;
Regina Mažeikienė, Institute of Chemistry, Center for Physical Sciences and Technology;
|
|
|
(pp.49
-
53)
Received: June 7, 2011,
Accepted: December 26, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
|
|
Fast Fabrication of Colorful Nanostructures Using Imprinting with Femtosecond Laser Structured Molds [DOI:10.2961/jlmn.2012.01.0010]
|
|
|
C.Y. Lin, ITRI South, Industrial Technology Research Institute;
P.H. Wu, ITRI South, Industrial Technology Research Institute;
K.P. Chang, ITRI South, Industrial Technology Research Institute;
C.W. Cheng, ITRI South, Industrial Technology Research Institute;
S.M. Huang, Central Mint;
|
|
|
(pp.54
-
57)
Received: June 5, 2011,
Accepted: December 29, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
|
|
Fabrication of Diffractive Optical Elements in Polymers by 400-nm Femtosecond Laser Pulses [DOI:10.2961/jlmn.2012.01.0011]
|
|
|
Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology;
Katsumi Matsuda, Production Method Development Group, Omron Corp.;
Satoshi Hirono, Production Method Development Group, Omron Corp.;
Hiroyuki Mochizuki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology;
|
|
|
(pp.58
-
61)
Received: May 21, 2011,
Accepted: December 31, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
|
|
Laser Texturization to Decrease Reflectance of Polycrystalline Silicon Wafers[DOI:10.2961/jlmn.2012.01.0012]
|
|
|
Monireh Ganjali, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
Mansoureh Ganjali, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
Parvaneh Sangpour, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
Ali Khanlarkhani, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
Mohammad Ali Meshkot, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
|
|
|
(pp.62
-
67)
Received: August 20, 2011,
Accepted: January 4, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
|
|
Strength of Joining Seams in Glass Welded by Ultra-fast Lasers Depending on Focus Height [DOI:10.2961/jlmn.2012.01.0013]
|
|
|
Kristian Cvecek, Bayerisches Laserzentrum GmbH;
Isamu Miyamoto, Bayerisches Laserzentrum GmbH;
Johannes Strauss, Bayerisches Laserzentrum GmbH;
Viet Bui, Bayerisches Laserzentrum GmbH;
Sonja Scharfenberg, Bayerisches Laserzentrum GmbH;
Thomas Frick, Bayerisches Laserzentrum GmbH;
Michael Schmidt, Bayerisches Laserzentrum GmbH;
|
|
|
(pp.68
-
72)
Received: June 29, 2011,
Accepted: January 4, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
|
|
Hybrid Laser-Plasma Micro-Structuring of Fused Silica Based on Surface Reduction by a Low-Temperature Atmospheric Pressure Plasma [DOI:10.2961/jlmn.2012.01.0014]
|
|
|
Stephan Brückner, Clausthal University of Technology, Institute of Energy Research and Physical Technologies;
Jennifer Hoffmeister, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies;
Jürgen Ihlemann, Laser Laboratory Göttingen e.V.;
Christoph Gerhard, Clausthal University of Technology, Institute of Energy Research and Physical Technologies;
Stephan Wieneke, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies;
Wolfgang Viöl, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies;
|
|
|
(pp.73
-
76)
Received: November 22, 2011,
Accepted: January 4, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
|
|
On-Demand Preparation of Microdot Patterns by Laser-Induced Dot Transfer [DOI:10.2961/jlmn.2012.01.0015]
|
|
|
Aiko Narazaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Ryozo Kurosaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Tadatake Sato, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Yoshizo Kawaguchi, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Wataru Watanabe , Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
|
|
|
(pp.77
-
80)
Received: June 27, 2011,
Accepted: January 7, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
|
|
Variation in the Etch Rate of LIBWE Fabricating Deep Microtrenches [DOI:10.2961/jlmn.2012.01.0016]
|
|
|
Tadatake Sato, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Yoshizo Kawaguchi, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Ryozo Kurosaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Aiko Narazaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
|
|
|
(pp.81
-
86)
Received: June 6, 2011,
Accepted: January 12, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
|
Blue Light Plasma Emission During LIBWE Using 532 nm Q-switched Nanosecond Laser [DOI:10.2961/jlmn.2012.01.0017]
|
|
|
Ji-Yen Cheng, Research Center for Applied Sciences, Academia Sinica Taiwan;
Mansoureh Z. Mousavi, Research Center for Applied Sciences, Academia Sinica Taiwan;
Chun-Ying Wu, Research Center for Applied Sciences, Academia Sinica Taiwan;
Hsieh-Fu Tsai, Research Center for Applied Sciences, Academia Sinica Taiwan;
|
|
|
(pp.87
-
92)
Received: June 6, 2011,
Accepted: January 16, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18
|
|
Laser Induced Formation of Buried Void Layer in Silicon[DOI:10.2961/jlmn.2012.01.0018]
|
|
|
T. Sameshima, Tokyo University of Agriculture and Technology;
Y. Kanda , Tokyo University of Agriculture and Technology;
M. Hasumi, Tokyo University of Agriculture and Technology;
J. Tatemichi, Nissin Ion Equipment Co.,Ltd. ;
Y. Inouchi, Nissin Ion Equipment Co.,Ltd. ;
M. Naito, Nissin Ion Equipment Co.,Ltd. ;
|
|
|
(pp.93
-
96)
Received: June 3, 2011,
Accepted: January 16, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19
|
|
3D Structures in Battery Materials [DOI:10.2961/jlmn.2012.01.0019]
|
|
|
Johannes Proell, Karlsruhe Institute of Technology;
Robert Kohler, Karlsruhe Institute of Technology;
Alexander Mangang, Karlsruhe Institute of Technology;
Sven Ulrich, Karlsruhe Institute of Technology;
Carlos Ziebert, Karlsruhe Institute of Technology;
Wilhelm Pfleging, Karlsruhe Institute of Technology;
|
|
|
(pp.97
-
104)
Received: June 3, 2011,
Accepted: January 16, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20
|
|
Controlling Antibody Immobilization by Laser Micro-processing [DOI:10.2961/jlmn.2012.01.0020]
|
|
|
Yuji Yamachoshi, AIST, Health Research Institute;
Masato Tanaka, AIST, Health Research Institute;
Tomonori Nakahara, AIST, Health Research Institute;
Kaori Abe, AIST, Health Research Institute;
Masatoshi Kataoka, AIST, Health Research Institute;
Toshihiko Ooie, AIST, Health Research Institute;
|
|
|
(pp.105
-
108)
Received: August 1, 2011,
Accepted: January 17, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
|
|
Synthesis of Core/Shell Nanowires Using Doped ZnO Targets [DOI:10.2961/jlmn.2012.01.0021]
|
|
|
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Kota Okazaki, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Kazuki Kubo, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Koji Tsuta, Graduate School of Information Science and Electrical Engineering, Kyushu University;
Mitsuhiro Higashihata , Graduate School of Information Science and Electrical Engineering, Kyushu University;
Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
|
|
|
(pp.109
-
111)
Received: June 6, 2011,
Accepted: January 22, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22
|
|
Drive Scheme for Cholesteric Liquid Crystal Display by Pulsed Laser [DOI:10.2961/jlmn.2012.01.0022]
|
|
|
Heng-Yin Chen, Display Technology Center/ Industrial Technology Research Institute;
Hsuan-Kai Lin, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology;
Chao-Chiun Liang, Display Technology Center/ Industrial Technology Research Institute;
Ju-Yuen Su, Display Technology Center/ Industrial Technology Research Institute;
Da-Long Cheng, Department of Computer and Communication, Shu-Te University;
|
|
|
(pp.112
-
114)
Received: July 20, 2011,
Accepted: January 26, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
|
|
High Speed Laser Micro Processing Using High Brilliance Continuous Wave Laser Radiation [DOI:10.2961/jlmn.2012.01.0023]
|
|
|
Horst Exner, University of Applied Sciences Mittweida, Laser Application Centre;
Lars Hartwig, University of Applied Sciences Mittweida, Laser Application Centre;
Robby Ebert, University of Applied Sciences Mittweida, Laser Application Centre;
Sascha Kloetzer, University of Applied Sciences Mittweida, Laser Application Centre;
Andre Streek, University of Applied Sciences Mittweida, Laser Application Centre;
Joerg Schille, University of Applied Sciences Mittweida, Laser Application Centre;
Udo Loeschner, University of Applied Sciences Mittweida, Laser Application Centre;
|
|
|
(pp.115
-
121)
Received: July 2, 2010,
Accepted: January 6, 2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24
|
|
(Technical Communication) Fabrication of Microstructure Arrays on Photosensitive Glass by Femtosecond Laser [DOI:10.2961/jlmn.2012.01.0024]
|
|
|
P.N. Wan, Graduate Institute of Opto-Mechatronics, National Chung Cheng University;
C.W. Cheng, ITRI South, Industrial Technology Research Institute;
H.W. Huang, Department of Mechanical Engineering, National Chung Cheng University;
J.S. Chen, Department of Mechanical Engineering, National Chung Cheng University;
|
|
|
(pp.122
-
125)
Received: June 2, 2011,
Accepted: November 17, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25
|
|
(Technical Communication) Visualization of Grain Boundaries on Stainless Steel Plate Surface by Nanosecond Laser Irradiation [DOI:10.2961/jlmn.2012.01.0025]
|
|
|
Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University;
Daisuke Tone, Graduate School of Engineering, Osaka University;
Toshiya Shibayanagi, Joining and Welding Research Institute, Osaka University;
Shinji Motokoshi, Institute for Laser Technology;
Masayuki Fujita, Institute for Laser Technology;
Nobuyuki Abe, Joining and Welding Research Institute, Osaka University;
|
|
|
(pp.126
-
129)
Received: March 28, 2011,
Accepted: December 19, 2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
