jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 4, No. 2. (August, 2009)


01 Excimer Laser Micromachining of LiNbO3 for Optical and Microwave Applications [DOI:10.2961/jlmn.2009.02.0001]
Ebrahim Mortazy, Poly-Grames, Centre for Radiofrequency Electronics Research; Ke Wu, Poly-Grames, Centre for Radiofrequency Electronics Research; Michel Meunier, Laser Processing Laboratory, École Polytechnique de Montréal;
(pp.79-83) Received: February 12th, 2008, Accepted: April 17th, 2009
pdfr


02 Effects of The Laser Wavelength on Drilling Process of Ceramic Using Nd:YAG Laser [DOI:10.2961/jlmn.2009.02.0002]
M. Mutlu, Laser Technologies Research and Application Center Kocaeli University; E. Kacar, Laser Technologies Research and Application Center Kocaeli University; Faculty of Arts and Science, Department of physics, Kocaeli University; E. Akman, Laser Technologies Research and Application Center Kocaeli University; C. K. Akkan, Laser Technologies Research and Application Center Kocaeli University; P. Demir, Laser Technologies Research and Application Center Kocaeli University; Faculty of Arts and Science, Department of physics, Kocaeli University; A. Demir, Laser Technologies Research and Application Center Kocaeli University; Faculty of Arts and Science, Department of physics, Kocaeli University;
(pp.84-88) Received: June 16th, 2008, Accepted: April 21st, 2009
pdfr


03 Laser Assited Doping for Photovoltaic Applications [DOI:10.2961/jlmn.2009.02.0003]
Vikram V. Iyengar , Charles L. Brown Department of Electrical and Computer Engineering, University of Virginia ; Mool C. Gupta, Charles L. Brown Department of Electrical and Computer Engineering, University of Virginia ;
(pp.89-94) Received: July 10th, 2008, Accepted: May 1st, 2009
pdfr


04 Mobility of Nanoparticles Generated by Femtosecond Laser Ablation in Liquids and Its Application to Surface Patterning [DOI:10.2961/jlmn.2009.02.0004]
Ana Menéndez-Manjón, Laser Zentrum Hannover e.V.; Jurij Jakobi, Laser Zentrum Hannover e.V.; Kerstin Schwabe, Medizinische Hochschule Hannover; Joachim K. Krauss, Medizinische Hochschule Hannover; Stephan Barcikowski, Laser Zentrum Hannover e.V.;
(pp.95-99) Received: June 16th, 2008, Accepted: May 7th, 2009
pdfr


05 Laser Based Rapid Fabrication of SiO2-phase Masks for Efficient UV-laser Micromachining [DOI:10.2961/jlmn.2009.02.0005]
J. Ihlemann, Laser-Laboratorium Göttingen; R. Weichenhain-Schriever, Laser-Laboratorium Göttingen;
(pp.100-103) Received: February 10th, 2009, Accepted: May 11th, 2009
pdfr


06 Extensive Micro-Structuring of Metals using Picosecond Pulses – Ablation Behavior and Industrial Relevance [DOI:10.2961/jlmn.2009.02.0006]
Frank Siegel, Laser Zentrum Hannover e.V.; Ulrich Klug, Laser Zentrum Hannover e.V.; Rainer Kling, Laser Zentrum Hannover e.V.;
(pp.104-110) Received: June 16th, 2008, Accepted: May 28th, 2009
pdfr


07 Quantified Femtosecond Laser Based Opto-perforation of Living Cells [DOI:10.2961/jlmn.2009.02.0007]
Judith Baumgart, Laser Zentrum Hannover; Willem Bintig, Institute of Biophysics, Leibniz University Hannover; Anaclet Ngezahayo, Institute of Biophysics, Leibniz University Hannover; Saskia Willenbrock, Animal Clinic, University of Veterinary Medicine; Hugo Murua Escobar, Animal Clinic, University of Veterinary Medicine; Wolfgang Ertmer, Institute of Quantum Optics, Leibniz University Hannover; Holger Lubatschowski, Laser Zentrum Hannover; Alexander Heisterkamp, Laser Zentrum Hannover;
(pp.111-117) Received: July 4th, 2008, Accepted: June 5th, 2009
pdfr


08 Laser Drilling of Epoxy-Glass Printed Circuit Boards [DOI:10.2961/jlmn.2009.02.0008]
Shozui Takeno, Nagoya Works, Mitsubishi Electric Corporation; Masaharu Moriyasu, Manufacturing Engineering Center; Masaki Kuzumoto, Advanced Technology R&D Center, Mitsubishi Electric Corporation ; Miki Kurosawa, Nagoya Works, Mitsubishi Electric Corporation; Yoshinori Hirata, Graduate School of Engineering, Osaka University;
(pp.118-123) Received: May 21st, 2009, Accepted: July 10th, 2009
pdfr


09 Numerical and Experimental Study of Interference Based Micromachining of Stainless Steel [DOI:10.2961/jlmn.2009.02.0009]
Avinash Parashar, Department of Mechanical and Industrial Engineering, EV13-310, Concordia University; Jasjit Singh Mann, Department of Mechanical and Industrial Engineering, EV13-310, Concordia University; Ankur Shah, Department of Mechanical and Industrial Engineering, EV13-310, Concordia University; NR Sivakumar, Department of Mechanical and Industrial Engineering, EV13-310, Concordia University;
(pp.124-127) Received: April 7th, 2009, Accepted: August 5th, 2009
pdfr


10 Selective Laser Melting of Honeycombs with Negative Poisson’s Ratio [DOI:10.2961/jlmn.2009.02.0010]
Olaf Rehme, Institute of Laser and System Technology (iLAS), Hamburg University of Technology (TUHH); Claus Emmelmann, Institute of Laser and System Technology (iLAS), Hamburg University of Technology (TUHH);
(pp.128-134) Received: June 16th, 2008, Accepted: August 12th, 2009
pdfr


11 Nano- and Microstructuring of SiO2 and Sapphire with Fs-laser Induced Selective Etching [DOI:10.2961/jlmn.2009.02.0011]
Maren Hörstmann-Jungemann, Lehrstuhl für Lasertechnik, RWTH Aachen University; Jens Gottmann, Lehrstuhl für Lasertechnik, RWTH Aachen University; Dirk Wortmann, Lehrstuhl für Lasertechnik, RWTH Aachen University;
(pp.135-140) Received: July 8th, 2008, Accepted: June 5th, 2009
pdfr


12 (Technical Communication) Development of High-speed & High-accuracy roll & PitchAngle Adjustment Machine for HDD Suspension [DOI:10.2961/jlmn.2009.02.0012]
Tadashi Sanada , Fujitsu automation Ltd.; Haruhiko Watanabe, Fujitsu automation Ltd.; Akihiko Ushimaru , Fujitsu Ltd.; Michinao Nomura, Fujitsu Ltd.;
(pp.141-143) Received: May 13th, 2008, Accepted: July 29th, 2009
pdfr


↑page top