jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 2, No. 3. (October, 2007)


01 Dielectric Properties of Ba(Zr, Ti)O3 Thin Films Fabricated by Pulsed Laser Deposition [DOI: 10.2961/jlmn.2007.03.0001]
Takanori Hino, Department of Materials Science and Engineering, Niihama National College of Technology; Minoru Nishida, Department of Materials Science and Engineering, Ehime University; Takao Araki, Department of Materials Science and Engineering, Ehime University; Takahiro Ohno, The Institute of Scientific and Industrial Research, Osaka University; Toshio Kawahara, The Institute of Scientific and Industrial Research, Osaka University; Masakazu Murasugi, The Institute of Scientific and Industrial Research, Osaka University; Hitoshi Tabata, The Institute of Scientific and Industrial Research, Osaka University; Tomoji Kawai, The Institute of Scientific and Industrial Research, Osaka University;
(pp.166-169) Received: May 17th, 2006, Accepted: June 25th, 2007
pdfr


02 Two-photon 3D lithography: A Versatile Fabrication Method for Complex 3D Shapes and Optical Interconnects within the Scope of Innovative Industrial Applications [DOI: 10.2961/jlmn.2007.03.0002]
V. Schmidt, Institute of Nanostructured Materials and Photonics, Joanneum Research; L. Kuna, Institute of Nanostructured Materials and Photonics, Joanneum Research; V. Satzinger, Institute of Nanostructured Materials and Photonics, Joanneum Research; G. Jakopic, Institute of Nanostructured Materials and Photonics, Joanneum Research; G. Leising, Institute of Nanostructured Materials and Photonics, Joanneum Research;
(pp.170-177) Received: April 24th, 2007, Accepted: August 23rd, 2007
pdfr


03 Laser-induced Writing of Submicron Surface Relief Gratings in Fused Silica on the Fly [DOI: 10.2961/jlmn.2007.03.0003]
Rico Böhme, Leibniz-Institut für Oberflächenmodifizierung; Klaus Zimmer, Leibniz-Institut für Oberflächenmodifizierung;
(pp.178-182) Received: April 24th, 2007, Accepted: August 23rd, 2007
pdfr


04 Non-thermal Micro Adjustment Using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2007.03.0004]
Peter Bechtold, Bavarian Laser Centre (BLZ) GmbH; Michael Schmidt, Bavarian Laser Centre (BLZ) GmbH;
(pp.183-188) Received: April 24th, 2007, Accepted: August 31st, 2007
pdfr


05 Femtosecond Laser Direct Writing of Optical Waveguides in Silicone Film [DOI: 10.2961/jlmn.2007.03.0005]
Susumu Nakamura, Department of Electrical and Electronic Systems Engineering, Nagaoka College of Technology; Stephen Ho, Department of Electrical and Computer Engineering, University of Toronto; Jianzhao Li, Department of Electrical and Computer Engineering, University of Toronto; Shane M. Eaton, Department of Electrical and Computer Engineering, University of Toronto; Haibin Zhang, Department of Electrical and Computer Engineering, University of Toronto; Peter R. Herman, Department of Electrical and Computer Engineering, University of Toronto;
(pp.189-193) Received: April 24th, 2007, Accepted: August 31st, 2007
pdfr


06 Quality Glass Processing by Laser Induced Backside Wet Etching [DOI: 10.2961/jlmn.2007.03.0006]
Z. Q. Huang, Department of Electrical and Computer Engineering, National University of Singapore; M. H. Hong, Department of Electrical and Computer Engineering, National University of Singapore; K. S. Tiaw, Data Storage Institute; Q. Y. Lin, Chartered Semiconductor Manufacturing Ltd.;
(pp.194-199) Received: April 24th, 2007, Accepted: September 6th, 2007
pdfr


07 Enhancement of Sensing Properties of Thin Poly(Methyl Methacrylate) Films by VUV Modification [DOI: 10.2961/jlmn.2007.03.0007]
Ioannis Raptis, Institute of Microelectronics, NCSR 'Demokritos'; Janaz Kovac, Department of Surface Engineering and Optoelectronics -F4, Jozef Stefan Institute; Margarita Chatzichristidi, Institute of Microelectronics, NCSR 'Demokritos'; Evangelia Sarantopoulou, National Hellenic Research Foundation; Zoe Kollia, National Hellenic Research Foundation; Spomenka Kobe, Department of Nanostructured Materials, Jozef Stefan Institute; Alkiviadis Constantinos Cefalas, National Hellenic Research Foundation;
(pp.200-205) Received: April 24th, 2007, Accepted: September 14th, 2007
pdfr


08 Scanning of Ultra-Short Laser Pulses in Dental Applications [DOI: 10.2961/jlmn.2007.03.0008]
Matin Strassl, Photonics Institute, Vienna University of Technology; Ariej Yousif, Photonics Institute, Vienna University of Technology; Ernst Wintner, Photonics Institute, Vienna University of Technology;
(pp.206-211) Received: April 24th, 2007, Accepted: October 4th, 2007
pdfr


09 Laser Parallel Nanopatterning of Lines and Curves by Micro-particle Lens Arrays [DOI: 10.2961/jlmn.2007.03.0009]
Wei Guo, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, University of Manchester; Zeng Bo Wang, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, University of Manchester; Lin Li, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, University of Manchester; Zhu Liu, Corrosion and Protection Centre, School of Materials, University of Manchester; Boris Luk'yanchuk, Data Storage Institute; David J. Whitehead, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, University of Manchester;
(pp.212-215) Received: April 24th, 2007, Accepted: October 4th, 2007
pdfr


10 Laser Micro Machining for Continous 3-D Contouring of Airflow Blades for a MEMS Turbine [DOI: 10.2961/jlmn.2007.03.0010]
Mark Heaton, Optical & Semiconductors Devices Group Dept. of Electrical and Electronic Engineering Imperial College London;
(pp.216-220) Received: June 20th, 2007, Accepted: October 4th, 2007
pdfr


11 Grating Interferometers for Efficient Generation of Large Area Grating Structures via Laser Ablation [DOI: 10.2961/jlmn.2007.03.0011]
Jozsef Bekesi, Laser-Laboratorium Göttingen; Jörg Meinertz, Laser-Laboratorium Göttingen; Jürgen Ihlemann, Laser-Laboratorium Göttingen; Peter Simon, Laser-Laboratorium Göttingen;
(pp.221-224) Received: April 24th, 2007, Accepted: October 11th, 2007
pdfr


12 The Influence of Plasma Plume in Laser Milling for Mold Manufacturing [DOI: 10.2961/jlmn.2007.03.0012]
Giovanni Tani, DIEM Department of Mechanical Construction Engineering, University of Bologna; Leonardo Orazi, DISMI Department of Science and Method for Engineering, University of Modena-Reggio Emilia; Alessandro Fortunato, DIEM Department of Mechanical Construction Engineering, University of Bologna; Gabriele Cuccolini, DISMI Department of Science and Method for Engineering, University of Modena-Reggio Emilia;
(pp.225-229) Received: April 24th, 2007, Accepted: October 11th, 2007
pdfr


13 Production of Nanoparticles with High Repetition Rate Picosecond Laser [DOI: 10.2961/jlmn.2007.03.0013]
Marijus Brikas, Institute of Physics; Stephan Barcikowski, Laser Zentrum Hannover; Boris Chichkov, Laser Zentrum Hannover; Gediminas Raciukaitis, Institute of Physics;
(pp.230-233) Received: April 24th, 2007, Accepted: October 12th, 2007
pdfr


14 Electronic and Optical Propersites of Polymer Thin Films Deposited by Resonant Infrared Laser Ablation [DOI: 10.2961/jlmn.2007.03.0014]
Richard F. Haglund, Jr., Department of Physics and Astronomy and W. M. Keck Foundation Free-Electron Laser Center Vanderbilt University; Stephen L. Johnson, Department of Physics and Astronomy and W. M. Keck Foundation Free-Electron Laser Center Vanderbilt University; Hee K. Park, AppliFlex LLC;
(pp.234-240) Received: May 8th, 2007, Accepted: October 18th, 2007
pdfr


15 ”Dry-Etching System” with Q-switched DPSS Laser for Flat Panel Displays [DOI: 10.2961/jlmn.2007.03.0015]
Naoaki Fukuda, Hitachi Zosen Corporation; Kazuyoshi Kunishio, Hitachi Zosen Corporation; Shigeaki Nakayama, Hitachi Zosen Corporation;
(pp.241-246) Received: April 24th, 2007, Accepted: October 23rd, 2007
pdfr


↑page top