jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 1, No. 3. (December, 2006)


01 Direct Observation of Femtosecond Laser Induced Modifications in the Bulk of Fused Silica by Phase Contrast Microscopy [DOI: 10.2961/jlmn.2006.03.0001]
Alexandre Mermillod-Blondin, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Igor M. Burakov, Institute of Thermophysics SB RAS; Razvan Stoian, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Arkadi Rosenfeld, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Eric Audouard, Laboratoire TSI, Université Jean Monnet; Nadezhda Bulgakova, Institute of Thermophysics SB RAS; Ingolf V. Hertel, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie;
(pp.155-160) Received: April 4th, 2005, Accepted: August 15th, 2006
pdfr


02 Laser Peening without Coating as a Surface Enhancement Technology [DOI: 10.2961/jlmn.2006.03.0002]
Yuji Sano, Toshiba Corporation; Koichi Akita, Musashi Institute of Technology; Kiyotaka Masaki, University of Electro-Communications; Yasuo Ochi, University of Electro-Communications; Igor Altenberger, University of Kassel; Berthold Scholtes, University of Kassel;
(pp.161-166) Received: May 16th, 2006, Accepted: September 10th, 2006
pdfr


03 Effect of Sampling Depth on the Analyte Response in Laser Ablation Inductively Coupled Plasma Mass Spectrometry [DOI: 10.2961/jlmn.2006.03.0003]
Zhongke Wang, Laboratory for Inorganic Chemistry, Swiss Federal Institute of Technology; Bodo Hattendorf, Laboratory for Inorganic Chemistry, Swiss Federal Institute of Technology; Detlef Günther, Laboratory for Inorganic Chemistry, Swiss Federal Institute of Technology;
(pp.167-171) Received: May 16th, 2006, Accepted: September 26th, 2006
pdfr


04 Control of Surface Roughness of Si and Ge Single Crystal by Laser Radiation [DOI: 10.2961/jlmn.2006.03.0004]
Artur Medvid, Riga Technical University, Laboratory of Semiconductor Physics; Igor Dmitruk, Kyiv National Taras Shevchenko University, Faculty of Physics; Pavels Onufrijevs, Riga Technical University, Laboratory of Semiconductor Physics; Dainis Grabovskis, Riga Technical University, Laboratory of Semiconductor Physics; Aleksandrs Mychko, Riga Technical University, Laboratory of Semiconductor Physics; Iryna Pundyk, Kyiv National Taras Shevchenko University, Faculty of Physics;
(pp.172-175) Received: May 16th, 2006, Accepted: October 2nd, 2006
pdfr


05 High Power Femtosecond Fiber Chirped Pulse Amplification System for High Speed Micromachining [DOI: 10.2961/jlmn.2006.03.0005]
Lawrence Shah, IMRA America, Inc.; Martin. E. Fermann, IMRA America, Inc.;
(pp.176-180) Received: May 16th, 2006, Accepted: October 10th, 2006
pdfr


06 Three-dimensional Nanostructuring of Transparent Materials by the Femtosecond Laser Irradiation [DOI: 10.2961/jlmn.2006.03.0006]
Y. Shimotsuma, Department of Material Chemistry, Kyoto University; M. Sakakura, Department of Material Chemistry, Kyoto University; S. Kanehira, Department of Material Chemistry, Kyoto University; J. Qiu, Department of Materials Science and Engineering, Zhejiang University; P. G. Kazansky, Optoelectronics Research Centre, University of Southampton; K. Miura, Department of Material Chemistry, Kyoto University; K. Fujita, Department of Material Chemistry, Kyoto University; K. Hirao, Department of Material Chemistry, Kyoto University;
(pp.181-184) Received: May 16th, 2006, Accepted: October 27th, 2006
pdfr


07 Laser Cleaning of Particles with the aid of Freezer/Chilling Plate [DOI: 10.2961/jlmn.2006.03.0007]
B. C. Lim, Data Storage Institute; M. H. Hong, Data Storage Institute; A. Kaur, Department of Electrical and Computer Engineering, National University of Singapore; L. P. Shi, Data Storage Institute; T. C. Chong, Data Storage Institute;
(pp.185-189) Received: May 16th, 2005, Accepted: November 7th, 2006
pdfr


08 Backside Etching at the Interface to Diluted Medium with Nanometer Etch Rates [DOI: 10.2961/jlmn.2006.03.0008]
Rico Böhme, Leibniz-Institute for Surface Modification e. V.; Klaus Zimmer, Leibniz-Institute for Surface Modification e. V.; David Ruthe, Leibniz-Institute for Surface Modification e. V.; Bernd Rauschenbach, Leibniz-Institute for Surface Modification e. V.;
(pp.190-194) Received: May 16th, 2006, Accepted: November 7th, 2006
pdfr


09 Fs-laser-induced Fabrication of Polymeric Optical and Fluidic Microstructures [DOI: 10.2961/jlmn.2006.03.0009]
Carsten Wochnowski, BIAS(Bremer Institut für angewandte Strahltechnik); Ya Cheng, RIKEN(The Institute of Physical and Chemical Research); Yasutaka Hanada, RIKEN(The Institute of Physical and Chemical Research); Krassimira Meteva, BIAS(Bremer Institut für angewandte Strahltechnik); Simeon Metev, BIAS(Bremer Institut für angewandte Strahltechnik); Koji Sugioka, RIKEN(The Institute of Physical and Chemical Research); Gerd Sepold, BIAS(Bremer Institut für angewandte Strahltechnik); Frank Vollertsen, BIAS(Bremer Institut für angewandte Strahltechnik); Katsumi Midorikawa, RIKEN(The Institute of Physical and Chemical Research);
(pp.195-200) Received: May 17th, 2006, Accepted: November 7th, 2006
pdfr


10 Fabrication and Characterisation of a Microfluidic Device for Bead-array Analysis by the LIBWE Method [DOI: 10.2961/jlmn.2006.03.0010]
Tadatake Sato, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Thomas Gumpenberger, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Aiko Narazaki, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Yoshizo Kawaguchi, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Ryozo Kurosaki, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Hiroyuki Niino, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.201-206) Received: May 16th, 2006, Accepted: November 8th, 2006
pdfr


11 Laser Ablation Simulation Including Time Dependent Atomic Processes [DOI: 10.2961/jlmn.2006.03.0011]
Hiroyuki Furukawa, Institute for Laser Technology;
(pp.207-210) Received: May 17th, 2006, Accepted: November 15th, 2006
pdfr


12 Fabrication of SiO2 Phase Gratings by UV Laser Patterning of Silicon Suboxide Layers and Subsequent Oxidation [DOI: 10.2961/jlmn.2006.03.0012]
J. Ihlemann, Laser-Laboratorium Göttingen e. V.; J. -H. Klein-Wiele, Laser-Laboratorium Göttingen e. V.; J. Békési, Laser-Laboratorium Göttingen e. V.; P. Simon, Laser-Laboratorium Göttingen e. V.;
(pp.211-214) Received: May 16th, 2006, Accepted: November 16th, 2006
pdfr


13 R&D of Gas-Based Laser Plasmas toward Material Processing [DOI: 10.2961/jlmn.2006.03.0013]
Kensuke Murai, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.215-220) Received: May 16th, 2006, Accepted: November 20th, 2006
pdfr


14 Liquid-Assisted Excimer Laser Micromaching for Ablation Enhancement and Debris Reduction [DOI: 10.2961/jlmn.2006.03.0014]
Dongsik Kim, Department of Mechanical Engineering, POSTECH; Deoksuk Jang, Department of Mechanical Engineering, POSTECH;
(pp.221-225) Received: May 16th, 2006, Accepted: November 20th, 2006
pdfr


15 RGD Peptide Grafting onto Micro-patterned PET: Peptide Distribution Impact on Cell Attachment [DOI: 10.2961/jlmn.2006.03.0015]
Céline Chollet, INSERM, U577, Bordeaux, F-33076 France; Univ. Victor Segalen Bordeaux 2; Sylvain Lazare, Laboratoire de Physicochimie Moléculaire (LPCM), UMR 5803 du CNRS, Université de Bordeaux 1; Brigitte Brouillaud, INSERM, U577, Bordeaux, F-33076 France; Univ. Victor Segalen Bordeaux 2; Christine Labrugere, Centre de caractérisation des Matériaux Avancés ICMCB-CNRS; Reine Bareille, INSERM, U577, Bordeaux, F-33076 France; Univ. Victor Segalen Bordeaux 2; Marie-Christine Durrieu, INSERM, U577, Bordeaux, F-33076 France; Univ. Victor Segalen Bordeaux 2;
(pp.226-230) Received: May 16th, 2006, Accepted: November 20th, 2006
pdfr


16 Thermo-Elastic-Plastic Analysis on Internal Processing Phenomena of Single-Crystal Silicon by Nanosecond Laser [DOI: 10.2961/jlmn.2006.03.0016]
Takeshi Monodane, Div. materials and Manufacturing Science, Osaka University; Etsuji Ohmura, Div. materials and Manufacturing Science, Osaka University; Fumitsugu Fukuyo, Hamamatsu Photonics K.K.; Kenshi Fukumitsu, Hamamatsu Photonics K.K; Hideki Morita, Hamamatsu Photonics K.K; Yoshinori Hirata, Hamamatsu Photonics K.K;
(pp.231-235) Received: June 7th, 2006, Accepted: November 20th, 2006
pdfr


17 Laser-induced forward Transfer: a Direct-writing Technique for Biosensors Preparation [DOI: 10.2961/jlmn.2006.03.0017]
Pere Serra, Universitat de Barcelona, Departament de Física Aplicada i Òptica; Juan Marcos Fernández-pradas, Universitat de Barcelona, Departament de Física Aplicada i Òptica; Mónica Colina, Universitat de Barcelona, Departament de Física Aplicada i Òptica; Martí Duocastella, Universitat de Barcelona, Departament de Física Aplicada i Òptica; Jorge Domínguez, IRBB-Barcelona Science Park, Universitat de Barcelona; José Luis Morenza, Universitat de Barcelona, Departament de Física Aplicada i Òptica;
(pp.236-242) Received: May 16th, 2006, Accepted: November 28th, 2006
pdfr


18 Micro Cutting of Thin Copper Plate by Fiber Laser with Laval Nozzle [DOI: 10.2961/jlmn.2006.03.0018]
Yasuhiro Okamoto, Nontraditional Machining Laboratory, Graduate School of Natural Science of Technology, Okayama University; Norio Kataoka, Kataoka Corporation; Hirokazu Tahara, Nontraditional Machining Laboratory, Graduate School of Natural Science of Technology, Okayama University; Ken Shiwayama, Nontraditional Machining Laboratory, Graduate School of Natural Science of Technology, Okayama University; Yoshiyuki Uno, Nontraditional Machining Laboratory, Graduate School of Natural Science of Technology, Okayama University;
(pp.243-246) Received: May 16th, 2006, Accepted: November 28th, 2006
pdfr


19 Theoretical Analysis of Second Harmonic Generation Considering Laser Absorption with Repetitive Irradiation of Focused Beam [DOI: 10.2961/jlmn.2006.03.0019]
Kazufumi Nomura, Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka university; Etsuji Ohmura, Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka university; Yoshinori Hirata, Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka university;
(pp.247-252) Received: May 19th, 2006, Accepted: November 28th, 2006
pdfr


20 Simulation of Light Interaction with Metallic Nanoparticles [DOI: 10.2961/jlmn.2006.03.0020]
Hiroaki Misawa, CREST-JST & RIES, Hokkaido University; Saulius Juodkazis, CREST-JST & RIES, Hokkaido University; Egidijus Vanagas, Laser Systems Inc.; Mingwei Li, Spectra-Physics, Newport Corporation;
(pp.253-257) Received: May 16th, 2006, Accepted: December 1st, 2006
pdfr


21 High Energy-High Repetition Rate Fiber Laser System for Precision Micromachining with Fundamental and Second Harmonic Wavelengths [DOI: 10.2961/jlmn.2006.03.0021]
Fumiyo Yoshino, IMRA America, Inc. Applications Research Laboratory; James Bovatsek, IMRA America, Inc. Applications Research Laboratory; Alan Arai, IMRA America, Inc. Applications Research Laboratory; Yuzuru Uehara, IMRA America, Inc.; Zhenlin Liu, IMRA America, Inc.; Gyu Cho, IMRA America, Inc.;
(pp.258-263) Received: May 16th, 2006, Accepted: December 1st, 2006
pdfr


22 Ultra-fast Diagnostics of Laser-induced Melting of Matter in ns to μs Time-scales [DOI: 10.2961/jlmn.2006.03.0022]
Alexander Horn, Lehrstuhl für Lasertechnik der RWTH Aachen; Ilja Mingareev, Lehrstuhl für Lasertechnik der RWTH Aachen; Isamu Miyamoto, Osaka University;
(pp.264-268) Received: May 16th, 2006, Accepted: December 9th, 2006
pdfr


23 In-process Monitoring and Adaptive Control for Laser Spot and Seam Welding of Pure Titanium [DOI: 10.2961/jlmn.2006.03.0023]
Yousuke Kawahito, Osaka University, Joining and Welding Research Institute; Masayuki Kito, Osaka University, Joining and Welding Research Institute; Seiji Katayama, Osaka University, Joining and Welding Research Institute;
(pp.269-274) Received: July 11th, 2006, Accepted: November 28th, 2006
pdfr


24 UV-laser Treatment in the Nanodomain: Forming of Organic Nanofibers [DOI: 10.2961/jlmn.2006.03.0024]
H. -G. Rubahn, Mads Clausen Institute, NanoSYD, University of Southern Denmark; F. Balzer, Institut für Physik/ASP, Humboldt-Universität zu Berlin; R. Frese, Mads Clausen Institute, NanoSYD, University of Southern Denmark; M. Madsen, Mads Clausen Institute, NanoSYD, University of Southern Denmark; K. Thilsing-Hansen, Mads Clausen Institute, NanoSYD, University of Southern Denmark;
(pp.275-280) Received: May 16th, 2006, Accepted: December 6th, 2006
pdfr


25 Design of Superresolved Phase Plates [DOI: 10.2961/jlmn.2006.03.0025]
Youhua Tan, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China; Rui Guo, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China; Shizhou Xiao, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China; Guanghua Cheng, State Key Laboratory of Transient Optics and Technology, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences; Wenhao Huang, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China;
(pp.281-287) Received: May 16th, 2006, Accepted: December 13th, 2006
pdfr


26 Femtosecond Laser Processing System with Target Tracking Feature [DOI: 10.2961/jlmn.2006.03.0026]
Akihiro Takita, Department of Optical Science and Technology, Faculty of Engineering, The University of Tokushima; Yoshio Hayasaki, Department of Optical Science and Technology, Faculty of Engineering, The University of Tokushima; Nobuo Nishida, Department of Optical Science and Technology, Faculty of Engineering, The University of Tokushima;
(pp.288-291) Received: May 16th, 2006, Accepted: December 15th, 2006
pdfr


27 Enhancing the Etch Rate at Backside Etching of Fused Silica [DOI: 10.2961/jlmn.2006.03.0027]
Klaus Zimmer, Leibniz-Institute for Surface Modification; Rico Böhme, Leibniz-Institute for Surface Modification; Bernd Rauschenbach, Leibniz-Institute for Surface Modification;
(pp.292-296) Received: May 16th, 2006, Accepted: November 20th, 2006
pdfr


↑page top