jlmn
subtitle_current
ISSN 1880-0688
DOI prefix 10.2961
Crossref logo

Click on "PDF" to download the full-text article in PDF format.

markVol. 13, No. 2. (September, 2018)


01 Laser-Induced Backside Wet Etching of SiO2 with a Visible Ultrashort Laser Pulse by Using KMnO4 Solution as an Absorber Liquid [DOI: 10.2961/jlmn.2018.02.0001]
M. Ehrhardt, Laser-Material Interaction Lab; P. Lorenz, Leibniz Institute of Surface Modification; B. Han, Laser-Material Interaction Lab; R. Zhu, Laser-Material Interaction Lab; K. Zimmer, Leibniz Institute of Surface Modification;
(pp.47-54) Received: December 19th, 2017, Accepted: May 10th, 2018
pdfr


02 Multi-Material Deposition of Polymer Powders with Vibrating Nozzles for a New Approach of Laser Sintering [DOI: 10.2961/jlmn.2018.02.0002]
Thomas Stichel, Bayerisches Laserzentrum GmbH; Tobias Laumer, Bayerisches Laserzentrum GmbH; Max Raths, Bayerisches Laserzentrum GmbH; Stephan Roth, Bayerisches Laserzentrum GmbH;
(pp.55-62) Received: October 12th, 2017, Accepted: May 13th, 2018
pdfr


03 Low-Profile Interconnects via Laser-Induced Forward Transfer [DOI: 10.2961/jlmn.2018.02.0003]
Kristin M. Charipar, Naval Research Laboratory, Materials Science & Technology Division; Nicholas A. Charipar, Naval Research Laboratory, Materials Science & Technology Division; Raymond C.Y. Auyeung, Naval Research Laboratory, Materials Science & Technology Division; Heungsoo Kim , Naval Research Laboratory, Materials Science & Technology Division; Alberto Piqué, Naval Research Laboratory, Materials Science & Technology Division;
(pp.63-67) Received: June 23rd, 2018, Accepted: August 25th, 2018
pdfr


04 Protecting Sub-Micrometer Surface Features in Polymers from Mechanical Damage Using Hierarchical Patterns [DOI: 10.2961/jlmn.2018.02.0004]
Florian Roessler, Technische Universität Dresden, Institut für Fertigungstechnik; Andrés F. Lasagni, Technische Universität Dresden, Institut für Fertigungstechnik;
(pp.68-75) Received: May 14th, 2018, Accepted: August 26th, 2018
pdfr


05 Laser Micro Machining of Alumina by a Picosecond Laser [DOI: 10.2961/jlmn.2018.02.0005]
Eric Gärtner, Fraunhofer - Institute for Machine Tools and Forming Technology IWU; Vittorio Polise, University of Naples Federico II, Department of Industrial Engineering; Flaviana Tagliaferri, Technische Universität Chemnitz, Institute for Machine Tools and Production Processes (IWP); Biagio Palumbo, University of Naples Federico II, Department of Industrial Engineering;
(pp.76-84) Received: June 22nd, 2018, Accepted: August 26th, 2018
pdfr


06 Use of an Elastomeric Donor for LIFT of Metal Foils [DOI: 10.2961/jlmn.2018.02.0006]
Kristin M. Charipar, Materials Science and Technology Division, Code 6360, Naval Research Laboratory; Raymond C.Y. Auyeung, Materials Science and Technology Division, Code 6360, Naval Research Laboratory; Heungsoo Kim, Materials Science and Technology Division, Code 6360, Naval Research Laboratory; Nicholas A. Charipar , Materials Science and Technology Division, Code 6360, Naval Research Laboratory; Alberto Piqué, Materials Science and Technology Division, Code 6360, Naval Research Laboratory;
(pp.85-89) Received: June 24th, 2018, Accepted: August 26th, 2018
pdfr


07 Homogeneous Low Spatial Frequency LIPSS on Dielectric Materials Generated by Beam-Shaped Femtosecond Pulsed Laser Irradiation [DOI: 10.2961/jlmn.2018.02.0007]
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.90-94) Received: June 25th, 2018, Accepted: September 6th, 2018
pdfr


08 Heat Accumulation Effects during Ultrashort Pulse Laser Ablation with Spatially Shaped Beams [DOI: 10.2961/jlmn.2018.02.0008]
Dmitriy Mikhaylov, Robert Bosch Manufacturing Solutions GmbH; Thomas Kiedrowski, Robert Bosch GmbH; Andrés Fabián Lasagni, Institut für Fertigungstechnik, Technische Universität Dresden;
(pp.95-99) Received: July 12th, 2018, Accepted: September 6th, 2018
pdfr


09 Static and Dynamic Contact Angle of Water Influenced by Femtosecond Laser Based Ripple Structures on Metals [DOI: 10.2961/jlmn.2018.02.0009]
Stefan Rung , Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Julian Zettl, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Babette Götzendorfer, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr- University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.100-104) Received: June 24th, 2018, Accepted: September 9th, 2018
pdfr


10 Laser-Induced Periodic Surface Structures (LIPSS) on Polymers Processed with Picosecond Laser Pulses [DOI: 10.2961/jlmn.2018.02.0010]
Marek Mezera, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces and Systems (MS3), Facul-ty of Engineering Technology, University of Twente; Martin van Drongelen, Chair of Production Technology, Department of Mechanics of Solids, Surfaces and Systems (MS3), Faculty of Engineering Technology, University of Twente; G.R.B.E. Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces and Systems (MS3), Facul-ty of Engineering Technology, University of Twente;
(pp.105-116) Received: June 24th, 2018, Accepted: September 12th, 2018
pdfr


11 Investigation to Increase the Welding Joint Area with Modulated Laser Beam Welding over Gap [DOI: 10.2961/jlmn.2018.02.0011]
Woo-Sik Chung, Fraunhofer Institute for Laser Technology ILT; Andre Haeusler, Fraunhofer Institute for Laser Technology ILT; Alexander Olowinsky, Fraunhofer Institute for Laser Technology ILT; Arnold Gillner, Fraunhofer Institute for Laser Technology ILT; Reinhart Poprawe, Fraunhofer Institute for Laser Technology ILT;
(pp.117-125) Received: June 24th, 2018, Accepted: September 12th, 2018
pdfr


12 Ultrashort Pulse Processing of Transparent Ceramics: The Role of Electronic and Thermal Damage Mechanisms [DOI: 10.2961/jlmn.2018.02.0012]
Christian Kalupka, Fraunhofer Institute for Laser Technology ILT; Martin Schmalstieg, Chair for Laser Technology LLT, RWTH Aachen University; Martin Reininghaus, Fraunhofer Institute for Laser Technology ILT;
(pp.126-130) Received: June 25th, 2018, Accepted: September 12th, 2018
pdfr


13 Embedded Metal Microstructures in Glass Substrates by a Combined Laser Trenching and Printing Process [DOI: 10.2961/jlmn.2018.02.0013]
Yuval Berg, Additive Manufacturing Group, Orbotech Ltd.; Shoshana Winter , Additive Manufacturing Group, Orbotech Ltd.; Zvi Kotler, Additive Manufacturing Group, Orbotech Ltd.; Yosi Shacham-Diamand, Department of Physical Electronics, Faculty of Engineering, Tel Aviv University;
(pp.131-134) Received: June 24th, 2018, Accepted: September 23rd, 2018
pdfr


14 (Technical Communication) Interconnection for Power Electronics Using Laser Ablation [DOI: 10.2961/jlmn.2018.02.0014]
Tian Long See, The Manufacturing Technology Centre; Adele Pliscott, The Manufacturing Technology Centre; Naim Kapadia, The Manufacturing Technology Centre;
(pp.135-139) Received: June 6th, 2018, Accepted: September 9th, 2018
pdfr


15 (Technical Communication) Investigation on Laser Scanner Synchronization via Advanced Beam Path Analysis in 3D Additive Manufacturing Systems [DOI: 10.2961/jlmn.2018.02.0015]
Andreas Koglbauer, PRIMES GmbH; Stefan Wolf, PRIMES GmbH; Otto Märten, PRIMES GmbH; Reinhard Kramer, PRIMES GmbH;
(pp.140-144) Received: June 21st, 2018, Accepted: September 12th, 2018
pdfr


16 (Erratum)Effect of Laser Irradiation on the Properties of ZnO Buffer Layers and Its Application to Selective-Growth of ZnO Nano/Microcrystals [DOI: 10.2961/jlmn.2018.02.0016]
Tetsuya Shimogaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Hirotaka Kawahara, Graduate School of Information Science and Electrical Engineering, Kyushu University; Shihomi Nakao, Graduate School of Information Science and Electrical Engineering, Kyushu University; Kosuke Harada, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Hiroshi Ikenoue, Graduate School of Information Science and Electrical Engineering, Kyushu University; Yoshiki Nakata, Institute of Laser Engineering, Osaka University; Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.145-145) Received: June 19th, 2018, Accepted: June 20th, 2018
pdfr


↑page top