jlmn
subtitle_current
ISSN 1880-0688
DOI prefix 10.2961
Crossref logo

Click on "PDF" to download the full-text article in PDF format.

markVol. 11, No. 3. (October, 2016)


01 Laser Direct Writing and Photonic Manufacturing of Microball Lens for Wide-angle Imaging, Energy Devices, and Sensors on Flexible Substrates [DOI: 10.2961/jlmn.2016.03.0001]
Shutong Wang , College of Electronics and Information Engineering, Sichuan University; Ruozhou Li, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee; Chong Zheng, Institute of Laser Engineering, Beijing University of Technology; Cheng Cheng, Department of Electrical Engineering and Computer Science, The University of Tennessee, Knoxville; Yongchao Yu, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee; Shi Bai, Institute of Laser Engineering, Beijing University of Technology; Guoying Feng, College of Electronics and Information Engineering, Sichuan University; Anming Hu, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee;
(pp.285-289) Received: May 23rd, 2016, Accepted: August 1st, 2016
pdfr


02 Study of Generating Sub-Diffraction-Limit Patterns with the Phase Modulation of Polarized Beams [DOI: 10.2961/jlmn.2016.03.0002]
Chen Zhang, Institute of Photonics & Photon-Technology, Northwest University; Hongfu Li , Kunming Institute of Physics; Shuang Wang, Institute of Photonics & Photon-Technology, Northwest University; Wei Zhao, Institute of Photonics & Photon-Technology, Northwest University; Xiaoqiang Feng, Institute of Photonics & Photon-Technology, Northwest University; Kaige Wang, Institute of Photonics & Photon-Technology, Northwest University; Guiren Wang, Mechanical Engineering Department & Biomedical Engineering Program, University of South Carolina; Jintao Bai, Institute of Photonics & Photon-Technology, Northwest University;
(pp.290-295) Received: May 26th, 2016, Accepted: August 1st, 2016
pdfr


03 Analysis and Evaluation of Boundary Conditions for Direct Surface Structuring by Multi-Beam Interference [DOI: 10.2961/jlmn.2016.03.0003]
Michael Steger, Chair for Laser Technology, RWTH Aachen University; Arnold Gillner, Chair for Laser Technology, RWTH Aachen University;
(pp.296-303) Received: May 26th, 2015, Accepted: August 1st, 2016
pdfr


04 Influence of Polarization State on Ultrafast Laser-Induced Bulk Nanostructuring [DOI: 10.2961/jlmn.2016.03.0004]
Anton Rudenko, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien; Jean-Philippe Colombier, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien; Tatiana E. Itina, Univ Lyon, UJM Saint-Etienne, Laboratoire Hubert Curien;
(pp.304-311) Received: May 19th, 2016, Accepted: August 9th, 2016
pdfr


05 Simple Synthesis of Ag Nanoparticles Arranged in 1D and 2D Grating-like Structures [DOI: 10.2961/jlmn.2016.03.0005]
Giorgio Baraldi, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Stephanie Reynaud, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Anthony Cazier, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Yaya Lefkir, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Nicolas Crespo-Monteiro, , Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Francis Vocanson, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ; Nathalie Destouches, Univ Lyon, UJM Saint- Etienne, CNRS, Institut d’Optique Graduate School, Laboratoire Hubert ;
(pp.312-316) Received: May 24th, 2016, Accepted: August 14th, 2016
pdfr


06 Direct Fabrication of Submicron-size Periodic Structures by Backside Irradiation [DOI: 10.2961/jlmn.2016.03.0006]
Tomoka Nakazumi, Research Insitute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST); Tadatake Sato, Research Insitute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.317-320) Received: May 20th, 2016, Accepted: August 22nd, 2016
pdfr


07 Waveguide Fabrication in Yb³+ Doped Phosphate Glass by 50 kHz Repetition Rate Ultrafast Laser [DOI: 10.2961/jlmn.2016.03.0007]
Xin Liu, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS; Jing Bai, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS; Wei Zhao, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS; Guanghua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of CAS;
(pp.321-325) Received: May 22nd, 2016, Accepted: August 22nd, 2016
pdfr


08 A Single-step Process of Generating Hollow and Porous TiO2 Nanoparticles by Picosecond Laser Ablation in Deionised Water [DOI: 10.2961/jlmn.2016.03.0008]
Abubaker Hamad, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; Lin Li, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; Zhu Liu, Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester; Xiang Li Zhong, School of Materials, The University of Manchester;
(pp.326-332) Received: February 12th, 2016, Accepted: August 24th, 2016
pdfr


09 Laser Direct Writing of Copper Circuits on Flexible Substrates for Electronic Devices [DOI: 10.2961/jlmn.2016.03.0009]
Shi Bai, Institute of Laser Engineering; Beijing University of Technology; Weiping Zhou, Institute of Laser Engineering; Beijing University of Technology; Tingxiu Hou, Institute of Laser Engineering; Beijing University of Technology; Anming Hu, Institute of Laser Engineering; Beijing University of Technology;
(pp.333-336) Received: May 21st, 2016, Accepted: August 31st, 2016
pdfr


10 Fabrication of P-, Sb-, and Mg-Doped ZnO Spherical Microcrystals by Laser Ablation in Air [DOI: 10.2961/jlmn.2016.03.0010]
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Toshinobu Tanaka, Graduate School of Information Science and Electrical Engineering, Kyushu University; Takeshi Ueyama , Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuya Ikebuchi, Graduate School of Information Science and Electrical Engineering, Kyushu University; Yuki Fujiwara, Graduate School of Information Science and Electrical Engineering, Kyushu University; Fumiaki Nagasaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Shuhei Takao, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Hiroshi Ikenoue , Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.337-340) Received: June 24th, 2016, Accepted: August 31st, 2016
pdfr


11 Formation of Micro-lens Array using Femtosecond and CO2 lasers [DOI: 10.2961/jlmn.2016.03.0011]
Hun-Kook Choi, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Jinchang Ryu, Charm Engineering Co., Ltd.; Chanju Kim, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Young-Chul Noh, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Ik-Bu Sohn, Advanced Photonics Research Institute (APRI), Gwangju Institute of Science and Technology (GIST); Jin-Tae Kim, Department of Photonic Engineering, Chosun University;
(pp.341-345) Received: May 20th, 2016, Accepted: September 1st, 2016
pdfr


12 Modification and Dynamics inside Diamond by Femtosecond Laser Double-Pulse Irradiation [DOI: 10.2961/jlmn.2016.03.0012]
Masaaki Sakakura, Office of Society-Academia Collaboration for Innovation, Kyoto University; Takuro Okada, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University; Vibhav Bharadwaj, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano; Belén Sotillo, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano; Shane M. Eaton, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano; Roberta Ramponi, Istituto di Fotonica e Nanotecnologie (IFN) - CNR, and Dipartimento di Fisica, Politecnico di Milano; Ali Serpengüzel, Microphotonics Research Laboratory, Department of Physics, Koç University; Ulaş S. Gökay, Microphotonics Research Laboratory, Department of Physics, Koç University; Yasuhiko Shimotsuma, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University; Kiyotaka Miura, Dept. of Material Chemistry, Graduate School of Eng., Kyoto University;
(pp.346-351) Received: May 21st, 2016, Accepted: September 11th, 2016
pdfr


13 Bessel-like Beam Array Generation Using Round-tip Micro-structures and Their Use in the Material Treatment [DOI: 10.2961/jlmn.2016.03.0013]
Evaldas Stankevičius, Center for Physical Sciences and Technology; Mantas Garliauskas , Center for Physical Sciences and Technology; Gediminas Račiukaitis, Center for Physical Sciences and Technology;
(pp.352-356) Received: May 24th, 2016, Accepted: September 15th, 2016
pdfr


14 Initial Cumulative Effects in Femtosecond Pulsed Laser-induced Periodic Surface Structures on Bulk Metallic Glasses [DOI: 10.2961/jlmn.2016.03.0014]
Chen Li, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon; Hao Zhang, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon; Guanghua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics; Nicolas Faure, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon; Damien Jamon, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon; Jean-Philippe Colombier, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon; Razvan Stoian, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon;
(pp.357-365) Received: May 21st, 2015, Accepted: September 15th, 2016
pdfr


15 Development of a Mathematical Model Relating Microstructures Evolvement to Optical Appearance of Laser-induced Polychrome Oxides on Iron Substrates [DOI: 10.2961/jlmn.2016.03.0015]
Taotao Wu, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology; Chenghua Wei, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology; Menglian Zhou, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology; Yongxiang Zhu, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology; Mingying Song , State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology; Lijun Wang, State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology;
(pp.366-371) Received: May 24th, 2016, Accepted: September 26th, 2016
pdfr


16 Deep-Trench Structure of Carbon-Fiber-Reinforced Thermoplastics (CFRTP) by Laser Cutting with a Single-Mode IR Fiber Laser [DOI: 10.2961/jlmn.2016.03.0016]
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST); Yoshihisa Harada, National Institute of Advanced Industrial Science and Technology (AIST); Akira Fujisaki, Furukawa Electric Co., Ltd.;
(pp.372-376) Received: May 29th, 2016, Accepted: September 27th, 2016
pdfr


17 Laser Structuring for Control of Coupling Between THz Light and Phonon Modes [DOI: 10.2961/jlmn.2016.03.0017]
Xuewen Wang, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology; Gediminas Seniutinas , Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology; Armandas Balčytis, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology; Irmantas Kašalynas, Center for Physical Sciences and Technology; Vytautas Jakštas, Center for Physical Sciences and Technology; Vytautas Janonis, Center for Physical Sciences and Technology; Rimvydas Venckevičius, Center for Physical Sciences and Technology; Ričardas Buividas, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology; Dominique Appadoo, Australian Synchrotron; Gintaras Valušis, Center for Physical Sciences and Technology; Saulius Juodkazis, Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology;
(pp.377-380) Received: May 22nd, 2016, Accepted: October 6th, 2016
pdfr


18 Monitoring of the Femtosecond Laser Micromachining Process of Materials Immersed in Water by Use of Laser-Induced Breakdown Spectroscopy [DOI: 10.2961/jlmn.2016.03.0018]
Aurimas Baskevicius, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center; Ona Balachninaite, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center; Mykolas Karpavicius, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center; Simas Butkus, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center; Domas Paipulas, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center; Valdas Sirutkaitis, Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center;
(pp.381-387) Received: June 7th, 2016, Accepted: October 6th, 2016
pdfr


19 Laser Thin Film Patterning for Rapid Prototyping and Customised Production of Flexible Electronics Devices [DOI: 10.2961/jlmn.2016.03.0019]
Nicola Bellini, Oxford Lasers Ltd.; Riccardo Geremia, Oxford Lasers Ltd.; Shane Norval, FlexEnable Ltd.; Guillaume Fichet, FlexEnable Ltd.; Dimitris Karnakis, Oxford Lasers Ltd.;
(pp.388-394) Received: July 18th, 2016, Accepted: October 12th, 2016
pdfr


20 Laser Micromachining of PEDOT:PSS/Graphene Thin Films by Using Beam Shaping Technology [DOI: 10.2961/jlmn.2016.03.0020]
Chien-Kai Chung, Instrument Technology Research Center, National Applied Research Laboratories; Shih-Feng Tseng, Instrument Technology Research Center, National Applied Research Laboratories; Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories; Donyau Chiang , Instrument Technology Research Center, National Applied Research Laboratories; Wei-Cheng Lin, Instrument Technology Research Center, National Applied Research Laboratories;
(pp.395-399) Received: June 16th, 2016, Accepted: October 12th, 2016
pdfr


21 (Technical Communication) Advances in 193 nm Lasers for Fiber Bragg Grating Manufacturing [DOI: 10.2961/jlmn.2016.03.0021]
Ralph Delmdahl, Coherent LaserSystems GmbH & Co. KG; Hans-Gerd Esser, Coherent LaserSystems GmbH & Co. KG; Burkhard Fechner, Coherent LaserSystems GmbH & Co. KG; Remco Nieuwland, Hittech Multin BV; Per Karlsson, NorthLab Photonics AB; Robert Rylander, NorthLab Photonics AB;
(pp.400-403) Received: May 9th, 2016, Accepted: August 9th, 2016
pdfr


22 (Erratum) Minimizing Stitching Errors for Large Area Laser Surface Processing [DOI: 10.2961/jlmn.2016.03.0022]
Moisés Alberto , Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS; Ortega Delgado, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS; Andrés Fabián Lasagni, Technische Universität Dresden, Institut für Fertigungstechnik;
(pp.404-404) Received: August 11th, 2016, Accepted: August 11th, 2016
pdfr


23 (Erratum) Experimental Investigation of Dimensional Variation in Laser-machined Micro-channels produced in Titanium Alloy [DOI: 10.2961/jlmn.2016.03.0023]
Naveed Ahmed, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University; Saied Darwish, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University; Abdulrahman M. Alahmari, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (FARCAMT Chair), King Saud University;
(pp.405-405) Received: September 22nd, 2016, Accepted: September 22nd, 2016
pdfr


↑page top