Archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol.10, No.2 (May, 2015)


01
Comparison of the Production of Nanostructures on Bulk Metal Samples by Picosecond Laser Ablation at Two Wavelengths for the Fabrication of Low-reflective Surfaces [DOI: 10.2961/jlmn.2015.02.0001]
Tamás Csizmadia, Department of Optics and Quantum Electronics, University of Szeged; Tomi Smausz, MTA-SZTE Research Group on Photoacoustic Spectroscopy, University of Szeged; Csaba Tápai, Department of Optics and Quantum Electronics, University of Szeged; Judit Kopniczky, Department of Optics and Quantum Electronics, University of Szeged; Xi Wang, Leibniz-Institut für Oberflächenmodifizierung e. V.; Martin Ehrhardt, Leibniz-Institut für Oberflächenmodifizierung e. V.; Pierre Lorenz, Leibniz-Institut für Oberflächenmodifizierung e. V.; Klaus Zimmer, Leibniz-Institut für Oberflächenmodifizierung e. V.; László Orosz, Department of Optics and Quantum Electronics, University of Szeged; Erika Varga, Department of Physical Chemistry and Materials Science, University of Szeged; Albert Oszkó, Department of Physical Chemistry and Materials Science, University of Szeged; Béla Hopp, Department of Optics and Quantum Electronics, University of Szeged;
(pp.110 - 118) Received: June 15, 2014, Accepted: January 22, 2015
pdfr


02
Evidence of Pressure Waves in Confined Laser Ablation [DOI: 10.2961/jlmn.2015.02.0002]
Matthias Domke, Josef Ressel Center for material processing with ultrashort pulsed lasers, Research Center for Microtechnology, Vorarlberg University of Applied Sciences; Dominik Felsl, Munich University of Applied Sciences; Stephan Rapp, Munich University of Applied Sciences; Jürgen Sotrop, Munich University of Applied Sciences; Heinz P. Huber, Munich University of Applied Sciences; Michael Schmidt, Graduate School in Advanced Optical Technologies (SAOT), Friedrich-Alexander-Universität;
(pp.119 - 123) Received: June 18, 2014, Accepted: January 28, 2015
pdfr


03
Direct Laser Writing of A Channel Waveguide in Al2O3:Nd Thin Film [DOI: 10.2961/jlmn.2015.02.0003]
Andrey G. Okhrimchuk, Aston Institute of Photonic Technologies, Aston University; Alexey I. Krikunov, Fotron Auto; Yurii A. Obod, Fotron Auto; Oleg D. Volpian, Fotron Auto;
(pp.124 - 128) Received: July 1, 2014, Accepted: January 28, 2015
pdfr


04
Ripple Formation by Femtosecond Laser Pulses for Enhanced Absorptance of Stainless Steel [DOI: 10.2961/jlmn.2015.02.0004]
Paulius Gečys, Center for Physical Sciences and Technology; Antanas Vinčiūnas, Center for Physical Sciences and Technology; Mindaugas Gedvilas, Center for Physical Sciences and Technology; Albinas Kasparaitis, Precizika Metrology; Rimantas Lazdinas, Precizika Metrology; Gediminas Račiukaitis, Center for Physical Sciences and Technology;
(pp.129 - 133) Received: July 2, 2014, Accepted: January 28, 2015
pdfr


05
Doubling Silicon Ablation Process Efficiency and Improving Quality Using High Power High Repetition Rate Green Laser with TimeShift™ Capability [DOI: 10.2961/jlmn.2015.02.0005]
Rajesh Patel, Spectra Physics; James Bovatsek, Spectra Physics; Hang-Ru Goy, Hewlett Packard;
(pp.134 - 139) Received: June 25, 2014, Accepted: January 30, 2015
pdfr


06
Realization of Multi-material Polymer Parts by Simultaneous Laser Beam Melting [DOI: 10.2961/jlmn.2015.02.0006]
Tobias Laumer, blz Bayerisches Laserzentrum GmbH; Thomas Stichel, blz Bayerisches Laserzentrum GmbH; Daniel Riedlbauer, CRC 814 Additive Fertigung, Friedrich-Alexander-University; Philipp Amend, blz Bayerisches Laserzentrum GmbH; Julia Mergheim, CRC 814 Additive Fertigung, Friedrich-Alexander-University; Michael Schmidt, blz Bayerisches Laserzentrum GmbH;
(pp.140 - 147) Received: June 13, 2014, Accepted: February 5, 2015
pdfr


07
Investigation of Optical Interconnection by using Photonic Wire Bonding [DOI: 10.2961/jlmn.2015.02.0007]
Zhichen Gu, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Tomohiro Amemiya, Quantum Nanoelectronics Research Center, Tokyo Institute of Technology; Atsushi Ishikawa, Metamaterials Laboratory, RIKEN; Yuki Atsumi, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Joonhyun Kang, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Takuo Hiratani, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Yusuke Hayashi, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Junichi Suzuki, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Nobuhiko Nishiyama, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology; Takuo Tanaka, Metamaterials Laboratory, RIKEN; Shigehisa Arai, Department of Electrical and Electronic Engineering, Tokyo Institute of Technology;
(pp.148 - 153) Received: June 17, 2014, Accepted: February 19, 2015
pdfr


08
Imaging of the Ejection Process of Nanosecond Laser-induced forward Transfer of Gold [DOI: 10.2961/jlmn.2015.02.0008]
R. Pohl, Chair of Applied Laser Technology, Faculty of Engineering Technology, University of Twente; C.W. Visser, Physics of Fluids, Faculty of Science and Technology, Mesa+ Institute, University of Twente; G.R.B.E. Römer, Chair of Applied Laser Technology, Faculty of Engineering Technology, University of Twente; C. Sun, Physics of Fluids, Faculty of Science and Technology, Mesa+ Institute, University of Twente; A.J. Huis in’t Veld, Chair of Applied Laser Technology, Faculty of Engineering Technology, University of Twente; D. Lohse, Physics of Fluids, Faculty of Science and Technology, Mesa+ Institute, University of Twente;
(pp.154 - 157) Received: June 13, 2014, Accepted: February 23, 2015
pdfr


09
Large Area Silica Nano Grids by Homogeneous High Resolution Laser Patterning of SiOx-Films [DOI: 10.2961/jlmn.2015.02.0009]
David Köhne, Laser-Laboratorium Göttingen; Thomas Fricke-Begemann, Laser-Laboratorium Göttingen; Ruth Weichenhain-Schriever, Laser-Laboratorium Göttingen; Jürgen Ihlemann, Laser-Laboratorium Göttingen;
(pp.158 - 161) Received: June 13, 2014, Accepted: February 23, 2015
pdfr


10
Optical Characterization of ZnO Microsphere Produced by Laser Ablation in Air [DOI: 10.2961/jlmn.2015.02.0010]
Daisuke Nakamura, , Graduate School of Information Science and Electrical Engineering, Kyushu University; Norihiro Tetsuyama,, , Graduate School of Information Science and Electrical Engineering, Kyushu University; Tetsuya Shimogaki, , Graduate School of Information Science and Electrical Engineering, Kyushu University; Yuta Sato, , Graduate School of Information Science and Electrical Engineering, Kyushu University; Yasuaki Mizokami, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.162 - 165) Received: June 16, 2014, Accepted: February 25, 2015
pdfr


11
Build-Up of a Resin Composite Core in a Fiber-Reinforced Post by a 2.78 µm-Pulsed Laser Treatment [DOI: 10.2961/jlmn.2015.02.0011]
Çağatay Barutcigil, Department of Restorative Dentistry, Faculty of Dentistry, Akdeniz University; Kubilay Barutcigil, Department of Prosthetic Dentistry, Faculty of Dentistry, Akdeniz University; Bilal Yasa, Department of Restorative Dentistry, Faculty of Dentistry, İzmir Katip Çelebi University; Hakan Arslan, Department of Endodontics, Faculty of Dentistry, Atatürk University; Merve Akcay, Department of Pediatric Dentistry, Faculty of Dentistry, İzmir Katip Çelebi University;
(pp.166 - 170) Received: November 2, 2014, Accepted: February 27, 2015
pdfr


12
Nanoparticle Generation From Nitinol Target Using Pulsed Laser Ablation [DOI: 10.2961/jlmn.2015.02.0012]
Tomi Smausz, MTA-SZTE Research Group on Photoacoustic Spectroscopy, University of Szeged; Gabriella Kecskeméti, Department of Optics and Quantum Electronics, University of Szeged; Bence Kondász, Department of Optics and Quantum Electronics, University of Szeged; Gergely Papp, Department of Optics and Quantum Electronics, University of Szeged; Zsolt Bengery, Department of Optics and Quantum Electronics, University of Szeged; Judit Kopniczky, Department of Optics and Quantum Electronics, University of Szeged; Béla Hopp, Department of Optics and Quantum Electronics, University of Szeged;
(pp.171 - 174) Received: June 16, 2014, Accepted: March 3, 2015
pdfr


13
High-Contrast Laser Marking of Microelectronic Packaging Modules [DOI: 10.2961/jlmn.2015.02.0013]
N. Liu, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke; Kh. Moumanis , Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke; D. Carrier, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke; M. Bilodeau, Centre de Collaboration MiQro Innovation (C2MI), IBM Canada Ltd; V. Pomerleau, Centre de Collaboration MiQro Innovation (C2MI), IBM Canada Ltd; B. Foisy, Centre de Collaboration MiQro Innovation (C2MI), IBM Canada Ltd; J.J. Dubowski, Laboratory for Quantum Semiconductors and Photon-based BioNanotechnology, Interdisciplinary Institute for Technological Innovation (3IT), Université de Sherbrooke;
(pp.175 - 180) Received: September 1, 2014, Accepted: March 3, 2015
pdfr


14
Theoretical Analysis of Non-ablative Laser Texturing of Silicon Surface with a Continuous Wave Fiber Laser [DOI: 10.2961/jlmn.2015.02.0014]
Hamid Farrokhi, School of Mechanical and Aerospace Engineering, Nanyang Technological University; Wei Zhou, School of Mechanical and Aerospace Engineering, Nanyang Technological University; Hongyu Zheng, Machining Technology Group, Singapore Institute of Manufacturing Technology;
(pp.181 - 185) Received: September 19, 2014, Accepted: March 3, 2015
pdfr


15
Sub-wavelength Uniform Periodic Surface Structures Induced by Low Femtosecond Laser Fluence on Silicon with Optical Glass Covering [DOI: 10.2961/jlmn.2015.02.0015]
Chao Dong, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University; NingYi Yuan, Jiangsu Key Laboratory for Photovolatic Engineering and Science, Changzhou University; Jianhua Qiu, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University; Biao Kan, Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University; JianNing Ding, Jiangsu Key Laboratory for Photovolatic Engineering and Science, Changzhou University;
(pp.186 - 189) Received: January 16, 2015, Accepted: March 11, 2015
pdfr


16
Back Side Ablation of SiC Diodes using a q-switched NIR Laser [DOI: 10.2961/jlmn.2015.02.0016]
B. Adelmann, University of Applied Sciences Aschaffenburg; A. Hürner, Chair of Electron Devices, University of Erlangen-Nuremberg; G. L. Roth, University of Applied Sciences Aschaffenburg; R. Hellmann, University of Applied Sciences Aschaffenburg;
(pp.190 - 194) Received: October 31, 2014, Accepted: March 22, 2015
pdfr


17
Laser Patterning of smart Nanomaterials for Reel-to-Reel production of Organic Photovoltaic (OPV) Devices [DOI: 10.2961/jlmn.2015.02.0017]
C. Moorhouse, Oxford Lasers; D. Karnakis, Oxford Lasers; C. Kapnopoulos, Lab for Thin Films, Nanosystems & Nanometrology (LTFN), Aristotle University of Thessaloniki; A. Laskarakis, Lab for Thin Films, Nanosystems & Nanometrology (LTFN), Aristotle University of Thessaloniki; E. Mekeridis, Organic Electronic Technologies P.C. (OET); S. Logothetidis, Lab for Thin Films, Nanosystems & Nanometrology (LTFN), Aristotle University of Thessaloniki;
(pp.195 - 201) Received: July 29, 2014, Accepted: March 24, 2015
pdfr


18
Experimental Investigation and Optimization for the Effective Parameters in the Laser Direct Structuring Process [DOI: 10.2961/jlmn.2015.02.0018]
Bassim Bachy, Institute for Factory Automation and Production Systems, Friedrich-Alexander-University Erlangen-Nüremberg ; Jörg Franke, Institute for Factory Automation and Production Systems, Friedrich-Alexander-University Erlangen-Nüremberg ;
(pp.202 - 209) Received: January 15, 2015, Accepted: March 24, 2015
pdfr


19
Simulation of the Reflectivity Properties of Microstructured Titanium Surface by Ray Tracing Method [DOI: 10.2961/jlmn.2015.02.0019]
Tamás Csizmadia, Department of Optics and Quantum Electronics, University of Szeged; Miklós Erdélyi, Department of Optics and Quantum Electronics, University of Szeged; Tomi Smausz, MTA-SZTE Research Group on Photoacoustic Spectroscopy, University of Szeged; Tibor Novák, Department of Optics and Quantum Electronics, University of Szeged; Béla Hopp, Department of Optics and Quantum Electronics, University of Szeged;
(pp.210 - 215) Received: June 15, 2014, Accepted: April 13, 2015
pdfr


20
Towards Dynamic Holographic Laser Beam Shaping [DOI: 10.2961/jlmn.2015.02.0020]
Marcus Baum, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Peter Bechtold, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Johannes Strauss, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Michael Schmidt, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
(pp.216 - 221) Received: June 16, 2014, Accepted: April 13, 2015
pdfr


21
Femtosecond Pulse Light Filament-Assisted Microfabrication of Biodegradable Polylactic Acid (PLA) Material [DOI: 10.2961/jlmn.2015.02.0021]
Mangirdas Malinauskas, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Laurynas Lukoševičius, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Simas Butkus, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University; Domas Paipulas, Laser Research Center, Department of Quantum Electronics, Physics Faculty, Vilnius University;
(pp.222 - 228) Received: July 3, 2014, Accepted: April 13, 2015
pdfr


22
(Technical Communication) Dicing of Thin Silicon Wafers with Ultra-Short Pulsed Lasers in the Range from 200 fs up to 10 ps [DOI: 10.2961/jlmn.2015.02.0022]
C. Fornaroli, Fraunhofer ILT; J. Holtkamp, Fraunhofer ILT; Arnold Gillner, Fraunhofer ILT;
(pp.229 - 233) Received: July 10, 2014, Accepted: February 18, 2015
pdfr


23
(Technical Communication) Development of a Path Generation Algorithm for Large-Area Laser Patterning Using a Manual-Input Control-Point [DOI: 10.2961/jlmn.2015.02.0023]
Kwangho Yoon, Dept. of High Density Energy Beam Processing & System, KIMM; Kyunghan Kim, Dept. of High Density Energy Beam Processing & System, KIMM; Jaehoon Lee, Dept. of High Density Energy Beam Processing & System, KIMM;
(pp.234 - 240) Received: March 31, 2014, Accepted: March 26, 2015
pdfr



↑page top