label_contents
label_links
logo_jlps
Archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol.9, No.2 (June, 2014)


01
Microstructure of MC-Fe Composite Layer on Carbon Steel by Laser Surface Alloying [DOI: 10.2961/jlmn.2014.02.0001]
Takuto Yamaguchi, Technology Research Institute of Osaka Prefecture; Hideki Hagino, Technology Research Institute of Osaka Prefecture; Mamoru Takemura, Technology Research Institute of Osaka Prefecture; Atsushi Nakahira, Osaka Prefecture University;
(pp.83 - 87) Received: July 17, 2013, Accepted: March 10, 2014
pdfr


02
Ablation of Copper by a Single Ultrashort Laser Pulse [DOI: 10.2961/jlmn.2014.02.0002]
S.Y. Wang , ITRI Southern Campus, Industrial Technology Research Institute; Y.P. Ren, Department of Mechanical and Aerospace Engineering, University of Missouri; K.P. Chang, ITRI Southern Campus, Industrial Technology Research Institute; C.W. Cheng, Department of Mechanical Engineering, National Chiao Tung University; J.K. Chen, Department of Mechanical and Aerospace Engineering, University of Missouri; D.Y. Tzou, Department of Mechanical and Aerospace Engineering, University of Missouri;
(pp.88 - 92) Received: July 18, 2013, Accepted: March 10, 2014
pdfr


03
Laser Tool for Single Cell Transfer [DOI: 10.2961/jlmn.2014.02.0003]
D. Riester, Fraunhofer Institute for Laser Technology; A. Özmert, Fraunhofer Institute for Laser Technology; M. Wehner, Fraunhofer Institute for Laser Technology;
(pp.93 - 97) Received: July 23, 2013, Accepted: March 11, 2014
pdfr


04
Modification and Machining on Back Surface of a Silicon Substrate by Femtosecond Laser Pulses at 1552 nm [DOI: 10.2961/jlmn.2014.02.0004]
Yoshiro Ito , Department of Mechanical Engineering, Nagaoka University of Technology; Hiroki Sakashita, Department of Mechanical Engineering, Nagaoka University of Technology; Ryosuke Suzuki, Department of Mechanical Engineering, Nagaoka University of Technology; Mitsuru Uewada, Department of Mechanical Engineering, Nagaoka University of Technology; Khanh Phu Luong, Department of Mechanical Engineering, Nagaoka University of Technology; Rie Tanabe, Department of Mechanical Engineering, Nagaoka University of Technology;
(pp.98 - 102) Received: August 30, 2013, Accepted: March 17, 2014
pdfr


05
Ultrashort Pulse Laser Cutting of Intraocular Lens Polymers [DOI: 10.2961/jlmn.2014.02.0005]
Johannes Heberle, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Florian Klämpfl, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Ilya Alexeev, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg; Michael Schmidt, Institute of Photonic Technologies, Friedrich-Alexander-Universität Erlangen-Nürnberg;
(pp.103 - 107) Received: July 23, 2013, Accepted: March 24, 2014
pdfr


06
Development of Ultrashort Pulsed VUV Laser and its Applications [DOI: 10.2961/jlmn.2014.02.0006]
Masahito Katto, Center for Collaborative Research and Community Cooperation, Photon Science Project, University of Miyazaki; Masanori Kaku, Faculty of Engineering, Photon Science Project, University of Miyazaki; Atsushi Yokotani, Faculty of Engineering, Photon Science Project, University of Miyazaki; Kenzo Miyazaki, Institute of Advanced Energy, Kyoto University; Noriaki Miyanaga, Institute of Laser Engineering, Osaka University; Shoichi Kubodera, Faculty of Engineering, Photon Science Project, University of Miyazaki;
(pp.108 - 112) Received: August 26, 2013, Accepted: April 3, 2014
pdfr


07
Miniaturized Reaction Chamber for Optimized Laser-Assisted Carbon Nanotube Growth [DOI: 10.2961/jlmn.2014.02.0007]
Yoeri van de Burgt, Department of Mechanical Engineering, Eindhoven University Technology; Wouter van Loon, Department of Mechanical Engineering, Eindhoven University Technology; Rajesh Mandamparambil, Department of Mechanical Engineering, Eindhoven University Technology; Yves Bellouard, Department of Mechanical Engineering, Eindhoven University Technology;
(pp.113 - 118) Received: July 2, 2013, Accepted: April 10, 2014
pdfr


08
Ti:sapphire Laser Ablation of Silicon in Different Ambients [DOI: 10.2961/jlmn.2014.02.0008]
Miklós Füle, Department of General and Environmental Physics, University of Szeged; Anett Gárdián, Department of Optics and Quantum Electronics, University of Szeged; János Csontos, Department of Optics and Quantum Electronics, University of Szeged; Judit Budai, Department of Optics and Quantum Electronics, University of Szeged; Zsolt Tóth, Department of Optics and Quantum Electronics, University of Szeged;
(pp.119 - 125) Received: August 19, 2013, Accepted: April 10, 2014
pdfr


09
Selective, Laser-Induced Etching of Fused Silica at High Scan-Speeds Using KOH [DOI: 10.2961/jlmn.2014.02.0009]
Martin Hermans, RWTH Aachen University, Chair for Lasertechnology LLT; Jens Gottmann, RWTH Aachen University, Chair for Lasertechnology LLT; Frank Riedel, Fraunhofer ILT;
(pp.126 - 131) Received: August 19, 2013, Accepted: April 14, 2014
pdfr


10
Plasmonically Coupled Faraday Effect in Fe- and Au-doped Silicate Glasses Irradiated with Femtosecond Laser [DOI: 10.2961/jlmn.2014.02.0010]
Seisuke Nakashima, Advanced Science Institute, RIKEN; Koji Sugioka, Advanced Science Institute, RIKEN; Katsumi Midorikawa, Advanced Science Institute, RIKEN; Kohki Mukai, Yokohama National University;
(pp.132 - 136) Received: September 18, 2013, Accepted: April 14, 2014
pdfr


11
Time-Resolved Soft X-Ray Imaging of Femtosecond Laser Ablation Processes on Metals [DOI: 10.2961/jlmn.2014.02.0011]
Takuro Tomita, Faculty of Engineering, The University of Tokushima; Masaharu Nishikino, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Noboru Hasegawa, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Yasuo Minami, Institute for Solid State Physics, The University of Tokyo; Ryota Takei, Institute for Solid State Physics, The University of Tokyo; Motoyoshi Baba, Institute for Solid State Physics, The University of Tokyo; Takashi Eyama, Faculty of Engineering, The University of Tokushima; Shodai Takayoshi, Faculty of Engineering, The University of Tokushima; Takeshi Kaihori, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Toshimasa Morita, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Yusuke Hirano, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Tetsuya Kawachi, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Mitsuru Yamagiwa, Quantum Beam Science Directorate, Japan Atomic Energy Agency; Tohru Suemoto, Institute for Solid State Physics, The University of Tokyo;
(pp.137 - 142) Received: July 19, 2013, Accepted: April 15, 2014
pdfr


12
Passivation of Silicon Surface by Laser Rapid Heating [DOI: 10.2961/jlmn.2014.02.0012]
H. Abe, Tokyo University of Agriculture and Technology; C. Akiyama, Tokyo University of Agriculture and Technology; M. Hasumi, Tokyo University of Agriculture and Technology; T. Sameshima, Tokyo University of Agriculture and Technology; T. Mizuno, Kanagawa University; N. Sano, Aurea Works Corporation;
(pp.143 - 146) Received: July 22, 2013, Accepted: April 19, 2014
pdfr


13
Mid-Infrared Resonant Ablation of PMMA [DOI: 10.2961/jlmn.2014.02.0013]
Sanjeev Naithani, Centre for Microsystems Technology (CMST), imec and Ghent University; Arnaud Grisard, Thales Research & Technology (TRT); David Schaubroeck, Centre for Microsystems Technology (CMST), imec and Ghent University; Eric Lallier, Thales Research & Technology (TRT); Geert Van Steenberge, Centre for Microsystems Technology (CMST), imec and Ghent University;
(pp.147 - 152) Received: August 19, 2013, Accepted: April 28, 2014
pdfr


14
Investigation on Flexural Strength Changes of Alumina Caused by Cutting using Fiber Laser [DOI: 10.2961/jlmn.2014.02.0014]
B. Adelmann, Applied laser and photonics group, University of Applied Sciences Aschaffenburg; R. Hellmann, Applied laser and photonics group, University of Applied Sciences Aschaffenburg;
(pp.153 - 160) Received: August 19, 2013, Accepted: May 13, 2014
pdfr


15
Highspeed Laser Micro Processing using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2014.02.0015]
Joerg Schille, University of Applied Sciences Mittweida; Lutz Schneider, University of Applied Sciences Mittweida; Mathias Mueller, University of Applied Sciences Mittweida; Udo Loeschner, University of Applied Sciences Mittweida; Nicholas Goddard, School of Chemical Engineering and Analytical Science, The University of Manchester; Patricia Scully, School of Chemical Engineering and Analytical Science, The University of Manchester; Horst Exner, University of Applied Sciences Mittweida;
(pp.161 - 168) Received: August 27, 2013, Accepted: May 13, 2014
pdfr


16
Three Phase Boundary Enhancement in SOFC Anodes by Applying Laser Drilling Technique [DOI: 10.2961/jlmn.2014.02.0016]
Mindaugas Maciulevičius, Department of Laser Technologies, Center for Physical Science and Technology; Brigita Abakevičienė, Institute of Materials Science of Kaunas University of Technology; Edvinas Navickas, Institute of Materials Science of Kaunas University of Technology; Mindaugas Gedvilas, Department of Laser Technologies, Center for Physical Science and Technology; Sigitas Tamulevičius, Institute of Materials Science of Kaunas University of Technology; Gediminas Račiukaitis, Department of Laser Technologies, Center for Physical Science and Technology;
(pp.169 - 173) Received: September 12, 2013, Accepted: May 13, 2014
pdfr


17
Laser-induced Structural Modifications inside Glass Using a Femtosecond Laser and a CO₂ Laser [DOI: 10.2961/jlmn.2014.02.0017]
Takuto Asada, Department of Control Engineering, Nara National College of Technology, Institute of National Colleges of Technology ; Takayuki Tamaki, Department of Control Engineering, Nara National College of Technology, Institute of National Colleges of Technology ; Masaya Nakazumi, Department of Control Engineering, Nara National College of Technology, Institute of National Colleges of Technology ; Etsuji Ohmura, Management of Industry and Technology, Graduate School of Engineering, Osaka University; Kazuyoshi Itoh, Science Technology Entrepreneurship Laboratory (e-square), Graduate School of Engineering, Osaka University;
(pp.174 - 179) Received: July 25, 2013, Accepted: May 14, 2014
pdfr


18
Laser Cutting of Carbon Fiber Reinforced Thermo-Plastic (CFRTP) by IR Laser Irradiation [DOI: 10.2961/jlmn.2014.02.0018]
Hiroyuki Niino, Advanced Laser and Process Technology Research Association (ALPROT); Yoshizo Kawaguchi, Advanced Laser and Process Technology Research Association (ALPROT); Tadatake Sato, Advanced Laser and Process Technology Research Association (ALPROT); Aiko Narazaki, Advanced Laser and Process Technology Research Association (ALPROT); Ryozo Kurosaki, National Institute of Advanced Industrial Science and Technology (AIST); Mayu Muramatsu, Advanced Laser and Process Technology Research Association (ALPROT); Yoshihisa Harada , Advanced Laser and Process Technology Research Association (ALPROT); Kenji Anzai, Advanced Laser and Process Technology Research Association (ALPROT); Koji Wakabayashi, Advanced Laser and Process Technology Research Association (ALPROT); Takahiro Nagashima, Advanced Laser and Process Technology Research Association (ALPROT); Zyunpei Kase, Advanced Laser and Process Technology Research Association (ALPROT); Masafumi Matsushita, Advanced Laser and Process Technology Research Association (ALPROT); Koichi Furukawa, Advanced Laser and Process Technology Research Association (ALPROT); Michiteru Nishino, Advanced Laser and Process Technology Research Association (ALPROT);
(pp.180 - 186) Received: August 19, 2013, Accepted: June 4, 2014
pdfr



↑page top
Copyright ©2020 Japan Laser Processing Society

CONTENTS

LINKS