LAMP2019 INVITED SPEAKERS (as of March 19, 2019)
Plenary Talks on DAY-1, May 21
Prof. Dr. Reinhart Poprawe
Managing Director, Fraunhofer-Institute for Laser Technology (ILT), Germany
"Digital photonic production for a better future of the global society"
Prof. Scott Carney
Director, Institute of Optics, University of Rochester, USA
"Synthetic optical holography"
Prof. Tadashi Kawazoe
Tokyo Denki University, Japan
"Localized source and sink systems of photons in nanometric region and their applications for devices and fabrications"
Dr. Nicholas A. Charipar
Head of the Applied Materials and Systems, U.S. Naval Research Laboratory, USA
"Laser processing of self-assembled plasmonic metasurfaces"
Prof. Dr. rer. nat. Evgeny Gurevich
Ruhr Universität Bochum, Germany
"Role of hydrodynamic mechanisms in formation of femtosecond laser-induced periodic surface structures"
Prof. Yasutaka Hanada
Hirosaki University, Japan
"Microfluidic fabrication of polymer materials using laser-induced bubble"
Prof. Peter R. Herman
University of Toronto, Canada
“Deep-focus ultrafast laser beam shaping for manipulating Kerr lensing, plasma defocusing, and surface aberration”
Dr. Udo Klotzbach
Fraunhofer-Institut für Werkstoff- und Strahltechnik, Dresden, Germany
"Direct laser writing and direct laser interference patterning for surface modification in automotive, photovoltaic and life sciences"
Dr. Matthieu Lancry
Universite Paris-Sud 11, Orsay (Paris 11), France.
“Femtosecond laser direct writing in silica glass: from nanogratings to circular optical properties”
Prof. Ruwen Peng
National Laboratory of Solid State Microstructures, Nanjing University, China
"From passive to active manipulation of the polarization states of light via metastructures"
Dr.ir. G.R.B.E. Römer
Associate Prof., University of Twente, Faculty of Engineering Technology,
Chair of Applied Laser Technology, The Netherlands
"Fundamentals and (potential) applications of Laser-induced Forward Transfer (LIFT) of 3D free standing micro-structures"
Prof. Emmanuel Stratakis
"Ultrafast laser-materials engineering and diagnostics for neural tissue engineering applications"
Dr. Olivier Uteza
LP3 laboratory, CNRS, University of Aix-Marseille, France
"Ablation of dielectrics with ultrashort laser pulses: Investigation of ionization mechanisms and outcomes"
Prof. Akira Watanabe
Tohoku University, Japan
"Laser direct writing of conductive carbon microelectrodes and device applications"
Dr. Dong Wu
USTC-the University of Science and Technology of China, China
"Femtosecond laser microfabrication for 3D microoptical devices and biomimetic microstructures"
Prof. Hai Xiao
S.L. Bell Distinguished Professor, The Holcombe Department of Electrical and Computer Engineering Clemson University, SC, USA
“Fabrication of 3D embedded microstructures in ceramics by integrated additive manufacturing and laser micromachining”
Dipl.-Ing. Peter Berger
Vice Director, IFSW, Germany
"Process strategies in high power laser-beam welding"
Dr. Andreas Heider
Joining Technology (CR/APJ2), Robert Bosch GmbH, Germany
“Laser welding of copper for e-mobility applications - Challenges, limits and strategies using different laser technologies –“
Dr.-Ing. Peter Kallage
Application Lab Manager, Coherent Inc., Germany
“A completely new approach to fiber laser welding of automotive and e-mobility components”
Prof. Dr. Soushyuu Kirihara
JWRI, Osaka University, Japan
“Ultraviolet laser lithography of dielectric micropatterns”
Dr. Markus Kogel-Hollacher
R&D Projects, Precitec Optronik GmbH, Germany
“Advanced laser material processing: How OCT sets new standards”
Prof. Lin Li
The University of Manchester, UK
"3D printing of multiple materials and functionally graded components using modified selective laser melting"
Prof. Zhuguo Li
Vice Dean, School of Materials Science and Engineering, Shanghai Jiao Tong University
Director, Shanghai Key Laboratory of Materials Laser Processing and Modification, China
“Laser additive manufacturing of (Ti3Al+TiB)/Ti composite for high temperature application”
Prof. Jyoti Mazumder
University of Michigan, USA
"Metallic additive manufacturing: Past present and future"
Prof. Andreas Otto
Technische Universität, Austria
"Fluid dynamical defect mechanisms in laser beam welding"
Prof. Kenji Shinozaki
Hiroshima University, Japan
"Cold cracking susceptibility of ultra-high tensile strength steel sheet during laser welding"
Dr. Jeong Suh
Principal Researcher of Laser Industrial Technology Research Group, KIMM
"Recent R&D progress on laser cutting technology for nuclear power plant decommissioning at KIMM"
Dr.-Ing. Jan-Philipp Weberpals
Technologieentwicklung Laserstrahl- / Widerstandsschweissverfahren Neckarsulm
AUDI AG, Germany
"Laser beam remote welding of lightweight aluminum construction for automotive industry"
Dr. Peer Woizeschke
BIAS- Bremer Institut für angewandte Strahltechnik, Germany
"Improvements in laser welding and brazing processes by beam oscillation"
LPM the 20th Year Anniversary Memorial Session on DAY-1, May 21
Dr. Henry Helvajian
The Aerospace Corporation, USA
"Laser Precision Microfabrication (LPM): 20 years of controlled material forming, process diagnostics and physical conversion"
Prof. Isamu Miyamoto
Emeritus Prof., Osaka University, Japan
(Former president of Japan Laser Processing Society)
“Advances of glass welding and its future prospect -Science and technology”
Prof. Dr. Andreas Ostendorf
Ruhr-University Bochum, Germany
"Review on laser structuring - from micrometer to nanometer precision within 20 years"
LPM SPECIAL SESSIONS
1) "Laser synthesis and processing in liquids”
Prof. Tae Kyu Kim
Pusan National University, Korea
“Synthesis of cocatalysts by pulsed laser ablation in liquid for photocatalytic hydrogen production”
Prof. Dr. Hongqiang Wang
Center for Nano Energy Materials
School of Materials Science and Engineering
Northwestern Polytechnical University, Xi'an, P. R. China
“Pulsed laser irradiation of colloidal nanoparticles for the synthesis of high performance optoelectronic films”
Prof. Dr. Tomoyuki Yatsuhashi
Osaka City University, Japan
“Synthesis of metal nanoparticles by femtosecond laser-induced plasma in organometallic solution”
2) "Laser coloring using short and ultrashort pulsed lasers"
Dr. Bogdan Voisiat (Invited Tutorial Talk)
Institute for Manufacturing Technology,
Technische Universitat Dresden, Germany
"Investigation of structural colors formed on metal surface by direct laser interference patterning"
Dr. Arkadiusz J. Antonczak
Wroclaw University of Technology, Wroclaw, Poland
"Coloring of metals using long pulse duration lasers"
Mr. Norbert Ackerl
ETH Zurich, Switzerland
“Ultra-short pulsed laser marking and coloration of metals with segmented pixel parameter transformation”
3) “Laser processing of glass materials: current status, trends and future”
Prof. Hirofumi Hidai
Chiba University, Japan
“Laser-induced metal particle manipulation in glasses”
Other invited speaker: TBA
Dr. Clemens Hoenninger
V. P. R&D, Amplitude Systemes, France
“High throughput femtosecond machining”
Prof. Kenichi L. Ishikawa
The University of Tokyo, Japan
“Q-LEAP STELLA and related Japanese national projects for smart laser manufacturing”
Prof. Dr. Christoph Leyens
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS, Germany
“Recent developments in laser micro and macro processing”