LAMP2015 Confirmed invited speakers as of April 13
Dr. Bo Gu
President, BOS Photonics, USA
“The state of the arts of laser manufacturing and future prospect”
Prof. Seiji Katayama
JWRI, Osaka University, Japan
"Fundamentals and evolution of laser welding”
Prof. Dr. Andreas Ostendorf
Ruhr University Bochum, Germany
“Latest developments in high precision ultrafast laser processing”
LPM2015 Invited Speakers
Dr. Jörn Bonse
BAM Federal Institute for Materials Research and Testing Division, Germany
"Laser-induced periodic surface structures (Ripples): current state of the art"
Prof. Feng Chen
State Key Laboratory for Manufacturing System Engineering &
Key Laboratory of Photonics Technology for Information of Shaanxi Province,
School of Electronic & Information Engineering, Xian Jiaotong University, China
"Bioinspired microfabrication of smart structures using femtosecond laser"
Dr. Peter Gregorcic
Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
“Optodynamics in medical laser applications”
Prof. Min Gu
Centre for Micro-Photonics, Faculty of Science, Engineering and Technology
Swinburne University of Technology, Australia
“Superresolution direct laser writing”
Prof. Dr. Chunlei Guo
The Institute of Optics, University of Rochester, USA
“Black and colored metals and applications”
Prof. Dr. Ajoy Kumar Kar
Institute of Photonics and Quantum Sciences, Heriot Watt University, UK
“3-D chalcogenide photonic devices”
Dr. Hakaru Mizoguchi
Executive Vice President and CTO of Gigaphoton Inc., Japan
“Performance of one hundred watt HVM LPP-EUV source"
Dr. Roger Jagdish Narayan
University of North Carolina, USA
“Two photon polymerization-based Manufacturing of medical devices”
Dr. Junichi Nishimae
Mitsubishi Electric Corporation, Japan
"Through-glass-vias with pulsed CO2 laser"
Prof. Razvan Stoian
Université de Lyon, Université Jean Monnet, St. Etienne, France
“Controlled ultrafast laser nanostructuring via spatiotemporal pulse design; applications in 3D photonics”
Associate Prof. Ioanna Zergioti
School of Applied Mathematics and Physical Sciences
National Technical University of Athens, Greece
“Laser printing and functionalization of sensors”
LPM Special Session (L1) "Hybrid femtosecond laser manufacturing"
Prof. Yves Bellouard
École Polytechnique Fédérale de Lausanne, Switzerland
"Subtractive femtosecond-laser-micromachining: writingpath dependence and its effects on stress generation in glass substrates"
Prof. Shoji Maruo
Department of Mechanical Engineering, Graduate School of Engineering,
Yokohama National University, Japan
"Three-dimensional laser microfabrication for the production of functional microdevices"
Dr. Roberto Osellame
Istituto di Fotonica e Nanotecnologie (IFN-CNR), Italy
"Hybrid femtosecond laser microfabrication"
LPM Special Session (L2) "Near-field nanopatterning"
Dr. Romain Fardel
Department of Mechanical and Aerospace Engineering,
Princeton University, USA
“Optical manipulation in near-field nanopatterning”
Mr. Stefan Kalies
Laser Zentrum Hannover e.V.,
Department of Biomedical Optics, Hannover, Germany
“Gold nanoparticle mediated laser transfection”
Dr. Jan Siegel
Institut of Optics, CSIC, Madrid, Spain
“Visualizing and controlling optical near fields: Strategies and applications”
LPM Special Session (L3) "Laser synthesis and excitation of nanoparticles"
Prof. Tsuyoshi Asahi
Ehime University, Japan
“Nanoparticle formation by pulsed-laser fragmentation in liquid: mechanism and applications”
Prof. Shuichi Hashimoto
The University of Tokushima, Japan
“Laser-induced picosecond-to-nanosecond dynamics of aqueous colloidal gold nanoparticles”
Prof. Jianrong Qiu
South China University of Technology, China
“Preparation of functional nanoparticles by femtosecond laser ablation in liquid”
HPL2015 Invited Speakers
Dr. Eckhard Beyer
1- Fraunhofer Institute for Material and Beam Technology (IWS) Dresden, Germany
2- Technische Universitaet Dresden, Germany
"Present state and future of laser materials processing for light weight applications"
Prof. Dr. Akihiko Chiba
Deformation Processing, Institute for Materials Research, Tohoku University, Japan
"Microstructure and mechanical properties evolution of biomedical Co-Cr-Mo alloys produced by electron beam additive manufacturing in comparison with laser beam additive manufacturing"
Mr. Martin Dahmen
Fraunhofer-Institute for Laser Technology, Aachen, Germany
"Properties of laser-beam welded ultra-high strength martensitics stainless steels"
Mr. Florian Fetzer
Institut für Strahlwerkzeuge (IFSW), University of Stuttgart, Germany
"Comprehensive diagnostics of CW- and power modulated welding of dissimilar metals"
Dr. Dirk Petring
Fraunhofer-Institute for Laser Technology ILT, Germany
"Examination of laser cutting phenomena by comprehensive steady-state simulations"
Dr. Jeroen Risse
Fraunhofer Institute for Laser Technology, Germany
"Additive manufacturing in series production: Recent research topics at Fraunhofer ILT with a focus on turbomachinery"
Prof. Dr. -Ing. Michael Schmidt
Friedrich-Alexander Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien, Germany
"High speed imaging in laser processing - Fully developed technology or still a topic of research?"
Dr. Eugene Shcherbakov
IPG Laser GmbH, Germany
"Fiber lasers development for industrial applications"