ID:
PASS:

ISSN 1880-0688

Vol. 2, No. 1 (March, 2007)
Click on "PDF" to download the full-text article in PDF format.
01 [06-018]
Patterning of ITO Layer on Glass with High Repetition Rate Picosecond Lasers
G. Račiukaitis, M. Brikas, M. Gedvilas, G. Darčianovas, Laboratory for Applied Research, Institute of Physics, Lithuania
(pp.1-6) Received: May, 2006, Accepted: December 20, 2006
[PDF]

02 [06-072]
Local Melting of Glass Material and Its Application to Direct Fusion Welding by Ps-laser Pulses
I. Miyamoto, Osaka University, Japan; A. Horn, J. Gottmann, Lehrstuhl für Lasertechnik, RWTH-Aachen, Germany
(pp. 7-14) Received: July 11, 2006, Accepted: January, 09, 2007
[PDF]


03 [06-031]
Aggregation of Silicon Nanocrystals Prepared by Laser Ablation in Deionized Water
V. Švrček, T. Sasaki, Y. Shimizu, N. Koshizaki, Nanoarchitectonics Research Center, AIST, Japan
(pp.15-20) Received: May 16, 2006, Accepted: January 11, 2007
[PDF]


04 [06-067]
Laser Direct-Write of Metallic Nanoparticle Inks

R. C. Y. Auyeung, H. Kim, A. Piqué, Materials Science and Technology Division, Naval Research Laboratory, USA; S. A. Mathews, Department of Electrical Engineering, The Catholic University of America, USA

(pp.21-25) Received: June 5, 2006, Accepted: January 11, 2007
[PDF]


05 [06-063]
Structural Modification in Borosilicate Glass by Use of Femtosecond Fiber Laser at 1.56 µm
T. Tamaki, K. Itoh, Department of Material and Life Science, Graduate School of Engineering, Osaka University, Japan; W. Watanabe, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology, Japan

(pp.26-30 ) Received: May 30, 2006, Accepted: January 17, 2007
[PDF]


06 [06-064]
Nanofabrication with Laser Holographic Lithograpy for Nanophotonic Structures

J. Yeo, H. Lewis, N. Meyer, Hewlett-Packard Company, USA

(pp.31-35 ) Received: June 4, 2006, Accepted: January 17, 2006
[PDF]


07 [06-038]
Micro-modification of Metal-doped Glasses by a Femtosecond Laser

B. Hua, Y. Shimotsuma, M. Nishi, K. Miura, K. Hirao, Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Japan

(pp.36-39 ) Received: May 16, 2006, Accepted: February 1, 2007
[PDF]


08 [06-010]
Composition Change of Glass Materials in Microlenses Formed by CO2 Laser
T. Yamabe, H. Murotani, K. Nakamoto, M. Wakaki, Department of Optical and Imaging Science & Technology, Tokai University, Japan
(pp.40-43) Received: May 16, 2006, Accepted: February 2, 2007
[PDF]


09 [06-043]
Investigation on Laser Micro Ablation of Steel Using Short and Ultrashort IR Multipulses

C. A. Hartmann, T. Fehr, A. Gillner, Fraunhofer Institut für Lasertechnik, Germany; M. Brajdic, Lehrstuhl für Lasertechnik der RWTH Aachen, Germany

(pp.44-48) Received: May 16, 2006, Accepted: February 2, 2007
[PDF]


10 [06-041]
Laser Direct Write of Active Thin-Films on Glass for Industrial Flat Panel Display Manufacture
M. Henry, P. M. Harrison, J. Wendland, Powerlase Ltd, UK
(pp.49-56) Received: May 16, 2006, Accepted: February 5, 2007
[PDF]


11 [06-071]
Fusion Welding of Glass Using Femtosecond Laser Pulses with High-repetition Rates
I. Miyamoto, Osaka University, Japan; A. Horn, J. Gottmann, D. Wortmann, Lehrstuhl r Lasertechnik, RWTH-Aachen, Germany; F. Yoshino, Applications Research Laboratory, IMRA America, Inc., USA
(pp.57-63) Received: July 11, 2006, Accepted: February 7, 2007
[PDF]


12 [06-016]
Variable Pulse Duration Laser for Material Processing
W. Wiechmann, L. Eyres, J. Morehead, J. Gregg, D. Richard, W. Grossman, JDSU Corporation, USA
(pp.64-68) Received: May 16, 2006, Accepted: February 20, 2007
[PDF]

13 [06-065]
Characterization of Laser Induced Charging Damage in Laser Micromachining

J. Yeo, Hewlett-Packard Company, USA

(pp.69-75) Received: June 4, 2006, Accepted: February 20, 2007
[PDF]

14 [06-037]
Theoretical Models and Qualitative Interpretations of Fs Laser Material Processing
N. M. Bulgakova, I. M. Burakov, Institute of Thermophysics SB RAS, Russia; Y. P. Meshcheryakov, Design and Technology Branch of Lavrentyev Institute of Hydrodynamics SB RAS, Russia; R. Stoian, Laboratoire TSI, Universite Jean Monnet, France; A. Rosenfeld, Max-Born-Institut für Nichtlineare Optik und Kurzzeitspektroskopie, Germany; I. V. Hertel, Deparment of Physics, Free University of Berlin, Germany
(pp.76-86) Received: May 16, 2006, Accepted: February 23, 2007
[PDF]

15 [06-076]
Effects of Pulse Delay in Metal Micromachining with Femtosecond Laser Pulses
J. Kim, S. Cho, W. Chang, K. Whang, Nanomachining team, Korea Institute of Machinery & Materials, South Korea; S. Na, Korea Advanced Institute of Science and Technology, South Korea
(pp.87-90) Received: May 16, 2006, Accepted: March 15, 2007
[PDF]


16 [06-009]
Laser Welding of Ta Sheath for a Thermocouple Wire for an Instrumented Fuel Irradiation Test
S. Kim, C. Lee, W. Kim, G. Park, Department of Dry Process Nuclear Fuel Development, Korea Atomic Energy Research Institute, Republic of Korea; J. Koh, Department of Materials Engineering, Korea University of Technology & Education, Republic of Korea
(pp.91-94) Received: May 16, 2006, Accepted: March 16, 2007
[PDF]

17 [06-025]
Determination of the Optimum Welding Parameters for a Laser Welded Spacer Grid Assembly for PWRs

K. Song, S. Kim, Korea Atomic Energy Research Institute, Korea
(pp.95-99 ) Received: May 16, 2006, Accepted: March 16, 2007
[PDF]


18 [06-017]
Change in the UV-VIS Absorbance of Amino Acids as a Result of Femtosecond Laser Irradiation
H. Nakano, N. Tamai, M. Nii, School of Science and Engineering, Kinki University, Japan; M. Tsukamoto, N. Abe, Joining and Welding Research Institute, Osaka University, Japan
(pp.100-102) Received: May 16, 2006, Accepted: March 19, 2007
[PDF]


19 [06-066]
Use of Laser Direct-Write in Microelectronics Assembly
S. A. Mathews, Department of Electrical Engineering, The Catholic University of America, USA; R. C. Y. Auyeung, A. Piqué, Materials Science and Technology Division, Naval Research Laboratory, USA
(pp.103-107) Received: June 5, 2006, Accepted: March 21, 2007
[PDF]


20 [06-058]
Optimization of Nd:YAG Laser Welding of Magnesium
A. Demir, E. Akman, T. Canel, S. Ertürk, N. Kenar, T. Sınmazçelik. O. Urhan, Laser Technologies Research and Application Center, University of Kocaeli, Turkey; A. A. Kaya, TUBITAK-MAM, Material Institute, Gebze, Turkey
(pp.108-113) Received: May 17, 2006, Accepted: March 26, 2007
[PDF]




↑page top
Copyright (C) 2007 Japan Laser Processing Society