ID:
PASS:

ISSN 1880-0688

Vol. 1, No. 3 (December, 2006)
Click on "PDF" to download the full-text article in PDF format.
01 [05-032]
Direct Observation of Femtosecond Laser Induced Modifications in the Bulk of Fused Silica by Phase Contrast Microscopy
A. Mermillod-Blondin, R. Stoian, A. Rosenfeld, I..V. Hertel, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie, Germany; I. M. Burakov, N. Bulgakova, Institute of Thermophysics SB RAS, Russia; E. Audouard, Laboratoire TSI, Université Jean Monnet, France
(pp.155-160) Received: April 4, 2005, Accepted: August 15, 2006
[PDF]

02 [06-014]
Laser Peening without Coating as a Surface Enhancement Technology
Y. Sano, Toshiba Corporation, Japan; K. Akita, Musashi Institute of Technology, Japan;
K. Masaki, Y. Ochi, University of Electro-Communications, Japan; I. Altenberger, B. Scholtes, University of Kassel, Germany

(pp. 161-166) Received: May 16, 2006, Accepted: September 10, 2006
[PDF]


03 [06-039]
Effect of Sampling Depth on the Analyte Response in Laser Ablation Inductively Coupled Plasma Mass Spectrometry
Z. Wang, B. Hattendorf, D. Günther, Laboratory for Inorganic Chemistry, Swiss Federal Institute of Technology, Switzerland
(pp.167-171) Received: May 16, 2006, Accepted: September 26, 2006
[PDF]


04 [06-035]
Control of Surface Roughness of Si and Ge Single Crystal by Laser Radiation
A. Medvid, P. Onufrijevs, D. Grabovskis, A. Mychko, Riga Technical University, Laboratory of Semiconductor Physics, Latvia; I. Dmitruk, I. Pundyk, Kyiv National Taras Shevchenko University, Faculty of Physics, Ukraine
(pp.172-175) Received: May 16, 2006, Accepted: October 2, 2006
[PDF]


05 [06-013]
High Power Femtosecond Fiber Chirped Pulse Amplification System for High Speed Micromachining
L. Shah, M. E. Fermann, IMRA America, Inc., USA

(pp.176-180 ) Received: May 16, 2006, Accepted: October 10, 2006
[PDF]


06 [06-027]
Three-dimensional Nanostructuring of Transparent Materials by the Femtosecond Laser Irradiation

Y. Shimotsuma, M. Sakakura, S. Kanehira, K. Miura, K. Fujita, K. Hirao, Department of Material Chemistry, Kyoto University, Japan; J. Qiu, Department of Materials Science and Engineering, Zhejiang University, China; P. G. Kazansky, Optoelectronics Research Centre, University of Southampton, UK

(pp.181-184 ) Received: May 16, 2006, Accepted: October 27, 2006
[PDF]


07 [06-040]
Laser Cleaning of Particles with the aid of Freezer/Chilling Plate

B. C. Lim, M. H. Hong, L. P. Shi, T. C. Chong, Data Storage Institute, Singapore; A. Kaur, Department of Electrical and Computer Engineering, National University of Singapore, Singapore

(pp.185-189 ) Received: May 16, 2006, Accepted: November 7, 2006
[PDF]


08 [06-047]
Backside Etching at the Interface to Diluted Medium with Nanometer Etch Rates
R. Böhme, K. Zimmer, D. Ruthe, B. Rauschenbach, Leibniz-Institute for Surface Modification e. V., Germany
(pp.190-194) Received: May 16, 2006, Accepted: November 7, 2006
[PDF]


09 [06-056]
Fs-laser-induced Fabrication of Polymeric Optical and Fluidic Microstructures
C. Wochnowski, K. Meteva, S. Metev, G. Sepold, F. Vollertsen, BIAS(Bremer Institut für angewandte Strahltechnik), Germany; Y. Cheng, Y. Hanada, K. Sugioka, K. Midorikawa, RIKEN(The Institute of Physical and Chemical Research), Japan
(pp.195-200) Received: May 17, 2006, Accepted: November 7, 2006
[PDF]


10 [06-026]
Fabrication and Characterisation of a Microfluidic Device for Bead-array Analysis by the LIBWE Method
T. Gumpenberger, T. Sato, A. Narazaki, Y. Kawaguchi, R. Kurosaki, H. Niino, Photonic Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Japan
(pp.201-206) Received: May 16, 2006, Accepted: November 8, 2006
[PDF]


11 [06-057]
Laser Ablation Simulation Including Time Dependent Atomic Processes
H. Furukawa, Institute for Laser Technology, Japan
(pp.207-210) Received: May 17, 2006, Accepted: November 15, 2006
[PDF]


12 [06-015]
Fabrication of SiO2 Phase Gratings by UV Laser Patterning of Silicon Suboxide Layers and Subsequent Oxidation
J.-H. Klein-Wiele, J. Békési, P. Simon, J. Ihlemann, Laser-Laboratorium Göttingen e. V., Germany
(pp.211-214) Received: May 16, 2006, Accepted: November 16, 2006
[PDF]

13 [06-003]
R&D of Gas-Based Laser Plasmas toward Material Processing
K. Murai, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Japan
(pp.215-220) Received: May 16, 2006, Accepted: November 20, 2006
[PDF]

14 [06-032]
Liquid-Assisted Excimer Laser Micromaching for Ablation Enhancement and Debris Reduction
D. Jang, D. Kim, Department of Mechanical Engineering, POSTECH, Korea
(pp.221-225) Received: May 16, 2006, Accepted: November 20, 2006
[PDF]

15 [06-054]
RGD Peptide Grafting onto Micro-patterned PET: Peptide Distribution Impact on Cell Attachment
C. Chollet, B. Brouillaud, R. Bareille, M.-C. Durrieu, INSERM, U577, Bordeaux, F-33076 France; Univ. Victor Segalen Bordeaux 2, France; S. Lazare, Laboratoire de Physicochimie Moléculaire (LPCM), UMR 5803 du CNRS, Université de Bordeaux 1, France; C. Labrugere, Centre de caractérisation des Matériaux Avancés ICMCB-CNRS, France
(pp.226-230) Received: May 16, 2006, Accepted: November 20, 2006
[PDF]


16 [06-068]
Thermo-Elastic-Plastic Analysis on Internal Processing Phenomena of Single-Crystal Silicon by Nanosecond Laser
T. Monodane, E. Ohmura, Div. materials and Manufacturing Science, Osaka University, Japan; F. Fukuyo, K. Fukumitsu, H. Morita, Y. Hirata, Hamamatsu Photonics K.K., Japan
(pp231-235) Received: June 7 , 2006, Accepted: November 20, 2006
[PDF]

17 [06-024]
Laser-induced forward Transfer: a Direct-writing Technique for Biosensors Preparation

P. Serra, J. M. Fernández-Pradas, M. Colina, M. Duocastella, J. L. Morenza, Universitat de Barcelona, Departament de Física Aplicada i Òptica, Spain; J. Domínguez, IRBB-Barcelona Science Park, Universitat de Barcelona, Spain

(pp.236-242 ) Received: May 16, 2006, Accepted: November 28, 2006
[PDF]


18 [06-052]
Micro Cutting of Thin Copper Plate by Fiber Laser with Laval Nozzle
Y. Okamoto, H. Tahara, K. Shiwayama, Y. Uno, Nontraditional Machining Laboratory, Graduate School of Natural Science of Technology Okayama University, Japan; N. Kataoka, Kataoka Corporation, Japan
(pp.243-246) Received: May 16, 2006, Accepted: November 28, 2006
[PDF]


19 [06-059]
Theoretical Analysis of Second Harmonic Generation Considering Laser Absorption with Repetitive Irradiation of Focused Beam
K. Nomura, E. Ohmura, Y. Hirata, Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka university, Japan
(pp.247-252) Received: May 19, 2006, Accepted: November 28, 2006
[PDF]


20 [06-044]
Simulation of Light Interaction with Metallic Nanoparticles
S. Juodkazis, H. Misawa, CREST-JST & RIES, Hokkaido University, Japan; E. Vanagas, Laser Systems Inc., Japan; M. Li, Spectra-Physics, Newport Corporation, USA
(pp.253-257) Received: May 16, 2006, Accepted: December 1, 2006
[PDF]

21 [06-036]
High Energy-High Repetition Rate Fiber Laser System for Precision Micromachining with Fundamental and Second Harmonic Wavelengths
F. Yoshino, J. Bovatsek, A. Arai, IMRA America, Inc. Applications Research Laboratory, USA; Y. Uehara, Z. Liu, G. Cho, IMRA America, Inc., USA
(pp.258-263) Received: May 16, 2006, Accepted: December 1, 2006
[PDF]

22 [06-034]
Ultra-fast Diagnostics of Laser-induced Melting of Matter in ns to μs Time-scales
A. Horn, I. Mingareev, Lehrstuhl für Lasertechnik der RWTH Aachen, Germany; I. Miyamoto, Osaka University, Japan
(pp.264-268) Received: May 16, 2006, Accepted: December 9, 2006
[PDF]

23 [06-070]
In-process Monitoring and Adaptive Control for Laser Spot and Seam Welding of Pure Titanium
Y. Kawahito, M. Kito, S. Katayama, Osaka University, Joining and Welding Research Institute, Japan
(pp.269-274) Received: July 11, 2006, Accepted: November 28, 2006
[PDF]

24 [06-045]
UV-laser Treatment in the Nanodomain: Forming of Organic Nanofibers
F. Balzer, Institut für Physik/ASP, Humboldt-Universität zu Berlin, Germany; R. Frese, M. Madsen, K. Thilsing-Hansen, H.-G. Rubahn, Mads Clausen Institute, NanoSYD, University of Southern Denmark, Denmark
(pp.275-280) Received: May 16, 2006, Accepted: December 6, 2006
[PDF]


25 [06-051]
Design of Superresolved Phase Plates
Y. Tan, R. Guo, S. Xiao, W. Huang, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, China; G. Cheng, State Key Laboratory of Transient Optics and Technology, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, China
(pp.281-287) Received: May 16, 2006, Accepted: December 13, 2006
[PDF]

26 [06-005]
Femtosecond Laser Processing System with Target Tracking Feature
A. Takita, Y. Hayasaki, N. Nishida, Department of Optical Science and Technology, Faculty of Engineering, The University of Tokushima, Japan
(pp.288-291) Received: May 16, 2006, Accepted: December 15, 2006
[PDF]


27 [06-042]
Enhancing the Etch Rate at Backside Etching of Fused Silica

K. Zimmer, R. Böhme, B. Rauschenbach, Leibniz-Institute for
Surface Modification, Germany
(pp.292-296 ) Received: May 16, 2006, Accepted: November 20, 2006
[PDF]





↑page top
Copyright (C) 2006 Japan Laser Processing Society