jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 8, No. 3. (December, 2013)


01 Influence of Laser Beam Polarization on Laser Micro-Machining of Molybdenum [DOI: 10.2961/jlmn.2013.03.0001]
Rémi Torres, ALPhANOV; Thomas Kaempfe, Université de Lyon; Martin Delaigue, Amplitude Systemes; Olivier Parriaux, Université de Lyon; Clemens Hönninger, Amplitude Systemes; John Lopez, ALPhANOV; Rainer Kling, ALPhANOV; Eric Mottay, Amplitude Systemes;
(pp.188-191) Received: July 4th, 2012, Accepted: August 23rd, 2013
pdfr


02 Dental Hard Tissue Ablation Using Picoseconds Pulsed Laser Emitting at 532 and 266 nm Wavelength [DOI: 10.2961/jlmn.2013.03.0002]
Balsam M. Mirdan, College of Education for Pure Science, University of Kirkuk; Dimitri Batani, Univ. Bordeaux; Luca Volpe, Univ. Bordeaux; Anna Maria Villa, Università di Milano Bicocca; Marco Bussoli, Università di Milano Bicocca; Rashida Jafer, Department of physics, Faculty of Science, King Abdul Aziz University; Mina Veltcheva, Università di Milano Bicocca; Patrizia Procacci, Dipartimento di Scienze Biomediche per la Salute, Università degli Studi di Milano; Vincenzo Conte, Dipartimento di Scienze Biomediche per la Salute, Università degli Studi di Milano;
(pp.192-200) Received: July 30th, 2012, Accepted: September 3rd, 2013
pdfr


03 Practical Aspects of Surface Generated Third Harmonic for Highly Precise Beam-workpiece Alignment [DOI: 10.2961/jlmn.2013.03.0003]
Kristian Cvecek, blz – Bayerisches Laserzentrum; Johannes Strauss, SAOT - Erlangen Graduate School in Advanced Optical Technologies , Friedrich-Alexander-University of Erlangen-Nuremberg; Ilya Alexeev, SAOT - Erlangen Graduate School in Advanced Optical Technologies , Friedrich-Alexander-University of Erlangen-Nuremberg; Isamu Miyamoto, SAOT - Erlangen Graduate School in Advanced Optical Technologies , Friedrich-Alexander-University of Erlangen-Nuremberg; Michael Schmidt, blz – Bayerisches Laserzentrum,;
(pp.201-205) Received: July 15th, 2013, Accepted: November 4th, 2013
pdfr


04 Growth Control of ZnO Nano-Crystals by Multi-Beam Interference Patterning [DOI: 10.2961/jlmn.2013.03.0004]
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tetsuya Simogaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Kota Okazaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.206-209) Received: June 8th, 2012, Accepted: November 5th, 2013
pdfr


05 Fabrication of Hierarchical Structures by Direct Laser Writing and Multi-Beam-Interference [DOI: 10.2961/jlmn.2013.03.0005]
Michael Steger, Chair for Laser Technology, Technical University Aachen; Claudia Hartmann, Chair for Laser Technology, Technical University Aachen; Stefan Beckemper, Fraunhofer Institute for Lasertechnology; Jens Holtkamp, Fraunhofer Institute for Lasertechnology; Arnold Gillner, Fraunhofer Institute for Lasertechnology;
(pp.210-215) Received: August 27th, 2013, Accepted: November 6th, 2013
pdfr


06 Time-Resolved Digital Holography in the Investigation of Ablation and Micro Fabrication by Femtosecond Pulses [DOI: 10.2961/jlmn.2013.03.0006]
Nerijus Šiaulys, Laser Research Center, Vilnius University; Andrius Melninkaitis, Laser Research Center, Vilnius University; Aivaras Urniežius, Laser Research Center, Vilnius University; Viačeslav Kudriašov, Laser Research Center, Vilnius University; Valdas Sirutkaitis, Laser Research Center, Vilnius University;
(pp.216-221) Received: September 13th, 2013, Accepted: November 13th, 2013
pdfr


07 Laser Texturing of Surfaces in Thin-Film Silicon Photovoltaics - A Comparison of Potential Processes [DOI: 10.2961/jlmn.2013.03.0007]
Tobias Knüttel, 4JET Technologies GmbH; Stefan Bergfeld, 4JET Technologies GmbH; Stefan Haas, Forschungszentrum Jülich GmbH;
(pp.222-229) Received: August 22nd, 2013, Accepted: November 17th, 2013
pdfr


08 The Voxel Onset Time as a Method for the Evaluation of Two Photon Lithography [DOI: 10.2961/jlmn.2013.03.0008]
Sascha Engelhardt, Institute for Laser Technology, RWTH Aachen; Jenny Tempeler, Institute for Laser Technology, RWTH Aachen; Arnold Gillner, Fraunhofer Institute for Laser Technology; Martin Wehner, Fraunhofer Institute for Laser Technology;
(pp.230-233) Received: July 23rd, 2013, Accepted: November 21st, 2013
pdfr


09 Scribe Width Optimization of Absorber Laser Ablation for Thin-film Silicon Solar Modules [DOI: 10.2961/jlmn.2013.03.0009]
Bugra Turan, Forschungszentrum Jülich GmbH; Stefan Haas, Forschungszentrum Jülich GmbH;
(pp.234-243) Received: August 22nd, 2013, Accepted: November 21st, 2013
pdfr


10 Effect of Laser Patterning on Properties of Crystalline Si Photovoltaic Cells and Substrates [DOI: 10.2961/jlmn.2013.03.0010]
Antanas Vinčiūnas, Center for Physical Science and Technology; Simonas Indrišiūnas, Center for Physical Science and Technology; Bogdan Voisiat, Center for Physical Science and Technology; Gediminas Račiukaitis, Center for Physical Science and Technology; Irena Šimkienė, Center for Physical Science and Technology; Rasa Suzanovičienė, Center for Physical Science and Technology; Alfonsas Rėza , Center for Physical Science and Technology; Regina Mažeikienė, Center for Physical Science and Technology;
(pp.244-252) Received: September 12th, 2013, Accepted: November 25th, 2013
pdfr


11 Crack-free Micromachining of Glass Ceramic Using Visible LIBWE [DOI: 10.2961/jlmn.2013.03.0011]
Ji-Yen Cheng, Research Center for Applied Sciences, Academia Sinica Taiwan; Huai-Yi Chen, Research Center for Applied Sciences, Academia Sinica Taiwan; Mansoureh Z. Mousavi, Research Center for Applied Sciences, Academia Sinica Taiwan; Chou Y.Y. Chang, Research Center for Applied Sciences, Academia Sinica Taiwan;
(pp.253-258) Received: July 20th, 2013, Accepted: November 29th, 2013
pdfr


12 Cavitation Bubble Dynamics during Laser Wet Etching of Transparent Sapphire Substrates by 1064 nm Laser Irradiation [DOI: 10.2961/jlmn.2013.03.0012]
X.Z. Xie, School of Electromechanical Engineering, Guangdong University of Technology; M.F. Hu, School of Electromechanical Engineering, Guangdong University of Technology; W.F. Chen, College of Mechanical Engineering, Nanjing University of Aeronautics and Astronautics; X. Wei, School of Electromechanical Engineering, Guangdong University of Technology; W. Hu, School of Electromechanical Engineering, Guangdong University of Technology; X.Y. Gao, School of Electromechanical Engineering, Guangdong University of Technology; X.R. Yuan, School of Electromechanical Engineering, Guangdong University of Technology; M.H. Hong, Department of Electrical and Computer Engineering, National University of Singapore;
(pp.259-265) Received: August 7th, 2013, Accepted: November 29th, 2013
pdfr


13 High Density Perforation of Thin Al-Foils with Ultra Short Pulse Lasers [DOI: 10.2961/jlmn.2013.03.0013]
Claudia Hartmann, Fraunhofer Institute for Laser Technology ILT; Nelli Hambach, Fraunhofer Institute for Laser Technology ILT; Michael Jüngst, Fraunhofer Institute for Laser Technology ILT; Stephan Keller, Fraunhofer Institute for Laser Technology ILT; Jens Holtkamp, Fraunhofer Institute for Laser Technology ILT; Arnold Gillner, Fraunhofer Institute for Laser Technology ILT;
(pp.266-270) Received: August 26th, 2013, Accepted: November 29th, 2013
pdfr


14 Microstructuring of Transparent Dielectric Films by TWIN-LIBWE Method for OWLS Applications [DOI: 10.2961/jlmn.2013.03.0014]
Bálint Kiss, Department of Optics and Quantum Electronics, University of Szeged; Ferenc Ujhelyi, Department of Atomic Physics, Physical Institute, Budapest University of Technology and Eco-nomics; Áron Sipos, Department of Optics and Quantum Electronics, University of Szeged; Balázs Farkas, Department of Optics and Quantum Electronics, University of Szeged; Péter Dombi, Wigner Research Centre for Physics, Hungarian Academy of Sciences; Károly Osvay, Department of Optics and Quantum Electronics, University of Szeged; Csaba Vass, Department of Optics and Quantum Electronics, University of Szeged;
(pp.271-275) Received: July 20th, 2013, Accepted: December 2nd, 2013
pdfr


15 Fast and Flexible Generation of Conductive Circuits [DOI: 10.2961/jlmn.2013.03.0015]
Philipp Amend, Bayerisches Laserzentrum GmbH; Oliver Hentschel, University of Erlangen-Nuremberg, Chair of Photonic Technologies; Christian Scheitler, University of Erlangen-Nuremberg, Chair of Photonic Technologies; Marcus Baum, University of Erlangen-Nuremberg, Chair of Photonic Technologies; Johannes Heberle, University of Erlangen-Nuremberg, Chair of Photonic Technologies; Stephan Roth, Bayerisches Laserzentrum GmbH; Michael Schmidt, Bayerisches Laserzentrum GmbH;
(pp.276-286) Received: July 30th, 2013, Accepted: December 3rd, 2013
pdfr


16 Fabrication of Micro- and Submicrometer Period Metal Reflection Gratings by Melt-Imprint Technique [DOI: 10.2961/jlmn.2013.03.0016]
Bálint Kiss, Department of Optics and Quantum Electronics, University of Szeged; Roland Flender, Department of Optics and Quantum Electronics, University of Szeged; Csaba Vass, Department of Optics and Quantum Electronics, University of Szeged;
(pp.287-291) Received: August 19th, 2013, Accepted: December 8th, 2013
pdfr


17 Fabrication of Spherical-Shaped Submicron Particles of ZnOUsing Laser-induced Melting of Submicron-sized Source Materials [DOI: 10.2961/jlmn.2013.03.0017]
Takeshi Tsuji, Institute of Materials Chemistry and Engineering, Kyushu University,; Yuuma Higashi, Institute of Materials Chemistry and Engineering, Kyushu University,; Masaharu Tsuji, Institute of Materials Chemistry and Engineering, Kyushu University,; Hideki Fujiwara, Research Institute for Electronic Science, Hokkaido University,; Yoshie Ishikawa, Nanosystem Research Institute, National Institute of Advanced Industrial Science and Technology,; Naoto Koshizaki, Factory of Engineering, Hokkaido University;
(pp.292-295) Received: July 23rd, 2013, Accepted: December 11th, 2013
pdfr


18 Synthesis of Various Sized ZnO Microspheres by Laser Ablation and Their Lasing Characteristics [DOI: 10.2961/jlmn.2013.03.0018]
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tetsuya Simogaki,, Graduate School of Information Science and Electrical Engineering, Kyushu University; Kota Okazaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Hiroshi Ikenoue, Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.296-299) Received: August 19th, 2013, Accepted: December 11th, 2013
pdfr


19 Evolution of Femtosecond Laser Induced Surface Structures at Low Number of Pulses near the Ablation Threshold [DOI: 10.2961/jlmn.2013.03.0019]
Olga Varlamova, Brandenburg University of Technology ; Juergen Reif , Brandenburg University of Technology ;
(pp.300-303) Received: October 2nd, 2013, Accepted: December 12th, 2013
pdfr


20 (Technical Communication) Femtosecond Micromachining of Ceramic Fibers for Electric Contact Soldering [DOI: 10.2961/jlmn.2013.03.0020]
Domas Paipulas, Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center; Aleksandr Alesenkov, Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center; Dalia Kaškelytė, Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center; Gediminas Chaževskis, Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center; Paulius Ragulis, Center for Physical Sciences and Technology; Žilvinas Kancleris, Center for Physical Sciences and Technology; Valdas Sirutkaitis, Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center;
(pp.304-308) Received: July 19th, 2013, Accepted: October 29th, 2013
pdfr


21 (Technical Communication) Laserscribing of Thin Films Using Top-Hat Laser Beam Profiles [DOI: 10.2961/jlmn.2013.03.0021]
Stefan Rung, University of Applied Sciences Aschaffenburg, Applied laser and photonics group; Mal Rexhepi, University of Applied Sciences Aschaffenburg, Applied laser and photonics group; Christian Bischoff, TOPAG Lasertechnik GmbH; Ralf Hellmann, University of Applied Sciences Aschaffenburg, Applied laser and photonics group;
(pp.309-314) Received: July 31st, 2013, Accepted: November 24th, 2013
pdfr


22 (Technical Communication) Laser Direct Ablation for Patterning Printed Wiring Boards Using Ultra-fast Lasers and High Speed Beam Delivery Architectures [DOI: 10.2961/jlmn.2013.03.0022]
Hisashi Matsumoto, Electro Scientific Industries, Inc.; Mark Unrath, Electro Scientific Industries, Inc.; Haibin Zhang, Electro Scientific Industries, Inc.; Bob Hainsey, Electro Scientific Industries, Inc.;
(pp.315-320) Received: July 18th, 2013, Accepted: November 27th, 2013
pdfr


↑page top