jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 7, No. 1. (February, 2012)


01 (Invited Paper) The Femtoprint Project [DOI: 10.2961/jlmn.2012.01.0001]
Y. Bellouard, Mechanical Engineering Department, Eindhoven University of Technology; A. Champion, Mechanical Engineering Department, Eindhoven University of Technology; B. Lenssen, Mechanical Engineering Department, Eindhoven University of Technology; M. Matteucci, Mechanical Engineering Department, Eindhoven University of Technology; A. Schaap, Mechanical Engineering Department, Eindhoven University of Technology; M. Beresna, Optoelectronics Research Center (ORC), University of Southampton; C. Corbari, Optoelectronics Research Center (ORC), University of Southampton; M. Gecevičius, Optoelectronics Research Center (ORC), University of Southampton; P. Kazansky, Optoelectronics Research Center (ORC), University of Southampton; O. Chappuis, LSRO, Ecole Polytechnique Fédérale de Lausanne; M. Kral, LSRO, Ecole Polytechnique Fédérale de Lausanne; R. Clavel, LSRO, Ecole Polytechnique Fédérale de Lausanne; F. Barrot, Centre Suisse d’Electronique et Microtechnique (CSEM); J.-M. Breguet, Centre Suisse d’Electronique et Microtechnique (CSEM); Y. Mabillard, Mecartex; S. Bottinelli, Mecartex; M. Hopper, Quintenz Hybridtechnik; C. Hoenninger, Amplitude Systèmes; E. Mottay, Amplitude Systèmes; J. Lopez, AlphaNOV;
(pp.1-10) Received: August 3rd, 2011, Accepted: December 26th, 2011
pdfr


02 Two-Photon Fabrication of Three-Dimensional Metallic Nanostructures for Plasmonic Metamaterials [DOI: 10.2961/jlmn.2012.01.0002]
Atsushi Ishikawa, Metamaterials Laboratory, RIKEN; Takuo Tanaka, Research Inst. for Electronic Science, Hokkaido University;
(pp.11-15) Received: June 7th, 2011, Accepted: December 9th, 2011
pdfr


03 Electrical Conduction Properties of SiC Modified by Femtosecond Laser [DOI: 10.2961/jlmn.2012.01.0003]
Takuto Ito, Department of Ecosystem Engineering, The University of Tokushima; Manato Deki, Department of Ecosystem Engineering, The University of Tokushima; Takuro Tomita, Department of Ecosystem Engineering, The University of Tokushima; Shigeki Matsuo, Department of Ecosystem Engineering, The University of Tokushima; Shuichi Hashimoto, Department of Ecosystem Engineering, The University of Tokushima; Takahiro Kitada, Center of Frontier Research of Engineering, The University of Tokushima; Toshiro Isu, Center of Frontier Research of Engineering, The University of Tokushima; Shinobu Onoda, Japan Atomic Energy Agency; Takeshi Ohshima, Japan Atomic Energy Agency;
(pp.16-20) Received: June 7th, 2011, Accepted: December 12th, 2011
pdfr


04 Nanocomposite Fibre Fabrication via in situ Monomer Grafting and Bonding on Laser-generated Nanoparticles [DOI: 10.2961/jlmn.2012.01.0004]
D. D. van ’t Zand , Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen; P. Nachev, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University; R. Rosenfeld, Laser Zentrum Hannover e.V.; P. Wagener, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen; A. Pich, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University; D. Klee, Interactive Materials Research, DWI an der RWTH Aachen e. V., RWTH Aachen University; S. Barcikowski, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen;
(pp.21-27) Received: June 3rd, 2011, Accepted: December 14th, 2011
pdfr


05 Fabrication of Transparent and Conductive Microdevices [DOI: 10.2961/jlmn.2012.01.0005]
Szabolcs Beke, Advanced Science Institute, RIKEN; László Kőrösi, Supramolecular and Nanostructured Materials Research Group of the Hungarian Academy of Sci-ences, University of Szeged; Koji Sugioka, Advanced Science Institute, RIKEN; Katsumi Midorikawa, Advanced Science Institute, RIKEN;
(pp.28-32) Received: June 16th, 2011, Accepted: December 19th, 2011
pdfr


06 Scribing of Thin-Film Solar Cells with Picosecond and Femtosecond Lasers [DOI: 10.2961/jlmn.2012.01.0006]
Paulius Gecys, Center for Physical Sciences and Technology; Gediminas Raciukaitis, Center for Physical Sciences and Technology; Anja Wehrmann, Leibniz-Institute of Surface Modification; Klaus Zimmer, Leibniz-Institute of Surface Modification; Alexander Braun, Solarion AG; Steffen Ragnow, Solarion AG;
(pp.33-37) Received: June 7th, 2011, Accepted: December 20th, 2011
pdfr


07 Laser Processing of Tungsten Powder with Femtosecond Laser Radiation [DOI: 10.2961/jlmn.2012.01.0007]
Robby Ebert, University of Applied Science, Laser Institute; Frank Ullmann, University of Applied Science, Laser Institute; Dorena Hildebrandt, University of Applied Science, Laser Institute; Joerg Schille, University of Applied Science, Laser Institute; Lars Hartwig, University of Applied Science, Laser Institute; Sascha Kloetzer, University of Applied Science, Laser Institute ; Andre Streek, University of Applied Science, Laser Institute; Horst Exner, University of Applied Science, Laser Institute;
(pp.38-43) Received: June 7th, 2010, Accepted: December 21st, 2011
pdfr


08 Using Laser Microfabrication to Write Conductive Polymer/SWNTs Nanocomposites[DOI:10.2961/jlmn.2012.01.0008]
Qingchuan Guo, Ruhr-University Bochum, Laser Applications Technology; Shizhou Xiao, Ruhr-University Bochum, Laser Applications Technology; Andreas Aumann, Ruhr-University Bochum, Laser Applications Technology; Matthias Jaeger, Ruhr-University Bochum, Laser Applications Technology; M’Barek Chakif, Ruhr-University Bochum, Laser Applications Technology; Reza Ghadiri, Ruhr-University Bochum, Laser Applications Technology; Cemal Esen, Ruhr-University Bochum, Laser Applications Technology; Mingyan Ma, Ruhr-University Bochum, Inorganic Chemistry I; Andreas Ostendorf, Ruhr-University Bochum, Laser Applications Technology;
(pp.44-48) Received: June 17th, 2011, Accepted: December 21st, 2011
pdfr


09 Laser Induced Graphite Oxide/Graphene Transformation [DOI:10.2961/jlmn.2012.01.0009]
Romualdas Trusovas, Department of Laser Technologies, Center for Physical Sciences and Technology; Gediminas Račiukaitis, Department of Laser Technologies, Center for Physical Sciences and Technology; Jurgis Barkauskas, Faculty of Chemistry, Vilnius University; Regina Mažeikienė, Institute of Chemistry, Center for Physical Sciences and Technology;
(pp.49-53) Received: June 7th, 2011, Accepted: December 26th, 2011
pdfr


10 Fast Fabrication of Colorful Nanostructures Using Imprinting with Femtosecond Laser Structured Molds [DOI:10.2961/jlmn.2012.01.0010]
C.Y. Lin, ITRI South, Industrial Technology Research Institute; P.H. Wu, ITRI South, Industrial Technology Research Institute; K.P. Chang, ITRI South, Industrial Technology Research Institute; C.W. Cheng, ITRI South, Industrial Technology Research Institute; S.M. Huang, Central Mint;
(pp.54-57) Received: June 5th, 2011, Accepted: December 29th, 2011
pdfr


11 Fabrication of Diffractive Optical Elements in Polymers by 400-nm Femtosecond Laser Pulses [DOI:10.2961/jlmn.2012.01.0011]
Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology; Katsumi Matsuda, Production Method Development Group, Omron Corp.; Satoshi Hirono, Production Method Development Group, Omron Corp.; Hiroyuki Mochizuki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology;
(pp.58-61) Received: May 21st, 2011, Accepted: December 31st, 2011
pdfr


12 Laser Texturization to Decrease Reflectance of Polycrystalline Silicon Wafers[DOI:10.2961/jlmn.2012.01.0012]
Monireh Ganjali, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC); Mansoureh Ganjali, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC); Parvaneh Sangpour, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC); Ali Khanlarkhani, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC); Mohammad Ali Meshkot, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center (MERC);
(pp.62-67) Received: August 20th, 2011, Accepted: January 4th, 2012
pdfr


13 Strength of Joining Seams in Glass Welded by Ultra-fast Lasers Depending on Focus Height [DOI:10.2961/jlmn.2012.01.0013]
Kristian Cvecek, Bayerisches Laserzentrum GmbH; Isamu Miyamoto, Bayerisches Laserzentrum GmbH; Johannes Strauss, Bayerisches Laserzentrum GmbH; Viet Bui, Bayerisches Laserzentrum GmbH; Sonja Scharfenberg, Bayerisches Laserzentrum GmbH; Thomas Frick, Bayerisches Laserzentrum GmbH; Michael Schmidt, Bayerisches Laserzentrum GmbH;
(pp.68-72) Received: June 29th, 2011, Accepted: January 4th, 2012
pdfr


14 Hybrid Laser-Plasma Micro-Structuring of Fused Silica Based on Surface Reduction by a Low-Temperature Atmospheric Pressure Plasma [DOI:10.2961/jlmn.2012.01.0014]
Stephan Brückner, Clausthal University of Technology, Institute of Energy Research and Physical Technologies; Jennifer Hoffmeister, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies; Jürgen Ihlemann, Laser Laboratory Göttingen e.V.; Christoph Gerhard, Clausthal University of Technology, Institute of Energy Research and Physical Technologies; Stephan Wieneke, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies; Wolfgang Viöl, HAWK - University of Applied Sciences and Arts, Laboratory of Laser and Plasma Technologies;
(pp.73-76) Received: November 22nd, 2011, Accepted: January 4th, 2012
pdfr


15 On-Demand Preparation of Microdot Patterns by Laser-Induced Dot Transfer [DOI:10.2961/jlmn.2012.01.0015]
Aiko Narazaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Ryozo Kurosaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Tadatake Sato, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Yoshizo Kawaguchi, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Wataru Watanabe , Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.77-80) Received: June 27th, 2011, Accepted: January 7th, 2012
pdfr


16 Variation in the Etch Rate of LIBWE Fabricating Deep Microtrenches [DOI:10.2961/jlmn.2012.01.0016]
Tadatake Sato, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Yoshizo Kawaguchi, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Ryozo Kurosaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Aiko Narazaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.81-86) Received: June 6th, 2011, Accepted: January 12th, 2012
pdfr


17 Blue Light Plasma Emission During LIBWE Using 532 nm Q-switched Nanosecond Laser [DOI:10.2961/jlmn.2012.01.0017]
Ji-Yen Cheng, Research Center for Applied Sciences, Academia Sinica Taiwan; Mansoureh Z. Mousavi, Research Center for Applied Sciences, Academia Sinica Taiwan; Chun-Ying Wu, Research Center for Applied Sciences, Academia Sinica Taiwan; Hsieh-Fu Tsai, Research Center for Applied Sciences, Academia Sinica Taiwan;
(pp.87-92) Received: June 6th, 2011, Accepted: January 16th, 2012
pdfr


18 Laser Induced Formation of Buried Void Layer in Silicon[DOI:10.2961/jlmn.2012.01.0018]
T. Sameshima, Tokyo University of Agriculture and Technology; Y. Kanda , Tokyo University of Agriculture and Technology; M. Hasumi, Tokyo University of Agriculture and Technology; J. Tatemichi, Nissin Ion Equipment Co.,Ltd. ; Y. Inouchi, Nissin Ion Equipment Co.,Ltd. ; M. Naito, Nissin Ion Equipment Co.,Ltd. ;
(pp.93-96) Received: June 3rd, 2011, Accepted: January 16th, 2012
pdfr


19 3D Structures in Battery Materials [DOI:10.2961/jlmn.2012.01.0019]
Johannes Proell, Karlsruhe Institute of Technology; Robert Kohler, Karlsruhe Institute of Technology; Alexander Mangang, Karlsruhe Institute of Technology; Sven Ulrich, Karlsruhe Institute of Technology; Carlos Ziebert, Karlsruhe Institute of Technology; Wilhelm Pfleging, Karlsruhe Institute of Technology;
(pp.97-104) Received: June 3rd, 2011, Accepted: January 16th, 2012
pdfr


20 Controlling Antibody Immobilization by Laser Micro-processing [DOI:10.2961/jlmn.2012.01.0020]
Yuji Yamachoshi, AIST, Health Research Institute; Masato Tanaka, AIST, Health Research Institute; Tomonori Nakahara, AIST, Health Research Institute; Kaori Abe, AIST, Health Research Institute; Masatoshi Kataoka, AIST, Health Research Institute; Toshihiko Ooie, AIST, Health Research Institute;
(pp.105-108) Received: August 1st, 2011, Accepted: January 17th, 2012
pdfr


21 Synthesis of Core/Shell Nanowires Using Doped ZnO Targets [DOI:10.2961/jlmn.2012.01.0021]
Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Kota Okazaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Kazuki Kubo, Graduate School of Information Science and Electrical Engineering, Kyushu University; Koji Tsuta, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata , Graduate School of Information Science and Electrical Engineering, Kyushu University; Tatsuo Okada, Graduate School of Information Science and Electrical Engineering, Kyushu University;
(pp.109-111) Received: June 6th, 2011, Accepted: January 22nd, 2012
pdfr


22 Drive Scheme for Cholesteric Liquid Crystal Display by Pulsed Laser [DOI:10.2961/jlmn.2012.01.0022]
Heng-Yin Chen, Display Technology Center/ Industrial Technology Research Institute; Hsuan-Kai Lin, Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology; Chao-Chiun Liang, Display Technology Center/ Industrial Technology Research Institute; Ju-Yuen Su, Display Technology Center/ Industrial Technology Research Institute; Da-Long Cheng, Department of Computer and Communication, Shu-Te University;
(pp.112-114) Received: July 20th, 2011, Accepted: January 26th, 2012
pdfr


23 High Speed Laser Micro Processing Using High Brilliance Continuous Wave Laser Radiation [DOI:10.2961/jlmn.2012.01.0023]
Horst Exner, University of Applied Sciences Mittweida, Laser Application Centre; Lars Hartwig, University of Applied Sciences Mittweida, Laser Application Centre; Robby Ebert, University of Applied Sciences Mittweida, Laser Application Centre; Sascha Kloetzer, University of Applied Sciences Mittweida, Laser Application Centre; Andre Streek, University of Applied Sciences Mittweida, Laser Application Centre; Joerg Schille, University of Applied Sciences Mittweida, Laser Application Centre; Udo Loeschner, University of Applied Sciences Mittweida, Laser Application Centre;
(pp.115-121) Received: July 2nd, 2010, Accepted: January 6th, 2012
pdfr


24 (Technical Communication) Fabrication of Microstructure Arrays on Photosensitive Glass by Femtosecond Laser [DOI:10.2961/jlmn.2012.01.0024]
P.N. Wan, Graduate Institute of Opto-Mechatronics, National Chung Cheng University; C.W. Cheng, ITRI South, Industrial Technology Research Institute; H.W. Huang, Department of Mechanical Engineering, National Chung Cheng University; J.S. Chen, Department of Mechanical Engineering, National Chung Cheng University;
(pp.122-125) Received: June 2nd, 2011, Accepted: November 17th, 2011
pdfr


25 (Technical Communication) Visualization of Grain Boundaries on Stainless Steel Plate Surface by Nanosecond Laser Irradiation [DOI:10.2961/jlmn.2012.01.0025]
Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University; Daisuke Tone, Graduate School of Engineering, Osaka University; Toshiya Shibayanagi, Joining and Welding Research Institute, Osaka University; Shinji Motokoshi, Institute for Laser Technology; Masayuki Fujita, Institute for Laser Technology; Nobuyuki Abe, Joining and Welding Research Institute, Osaka University;
(pp.126-129) Received: March 28th, 2011, Accepted: December 19th, 2011
pdfr


↑page top