jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 6, No. 3. (December, 2011)


01 Laser Micro-Patterning by Means of Optical Fibers with Micro-grinded Lens End Faces [DOI: 10.2961/jlmn.2011.03.0001]
S. Yakunin, Institute of Applied Physics, Johannes Kepler University Linz ; J. Heitz, Institute of Applied Physics, Johannes Kepler University Linz;
(pp.180-184) Received: June 7th, 2010, Accepted: October 10th, 2011
pdfr


02 Flexible Microstructuring of Thin Films Using Multi-beam Interference Ablation with Ultrashort Lasers [DOI: 10.2961/jlmn.2011.03.0002]
Bogdan Voisiat, Center for Physical Sciences and Technology; Mindaugas Gedvilas, Center for Physical Sciences and Technology; Simonas Indrišiūnas, Center for Physical Sciences and Technology; Gediminas Račiukaitis, Center for Physical Sciences and Technology;
(pp.185-190) Received: July 23rd, 2011, Accepted: October 19th, 2011
pdfr


03 Laser Treatment of ITO and ZnO Nanoparticles for the Production of Thin Conducting Layers on Transparent Substrates [DOI: 10.2961/jlmn.2011.03.0003]
Marcus Baum, Chair of Photonic Technologies, Friedrich-Alexander-University Erlangen-Nuremberg ; Ilya Alexeev, Chair of Photonic Technologies, Friedrich-Alexander-University Erlangen-Nuremberg; Michael Schmidt, Chair of Photonic Technologies, Friedrich-Alexander-University Erlangen-Nuremberg;
(pp.191-194) Received: June 3rd, 2011, Accepted: October 22nd, 2011
pdfr


04 Two-photon-induced Microfabrication of Flexible Optical Waveguides [DOI: 10.2961/jlmn.2011.03.0004]
Josef Kumpfmueller, Institute of Applied Synthetic Chemistry, Vienna University of Technology; Klaus Stadlmann, Institute of Material Science and Technology, Vienna University of Technology; Valentin Satzinger, MATERIALS-Institute for Surface Technology and Photonics, Joanneum Research; Zhiquan Li, Institute of Applied Synthetic Chemistry, Vienna University of Technology; Juergen Stampfl, Institute of Material Science and Technology, Vienna University of Technology; Robert Liska, Institute of Applied Synthetic Chemistry, Vienna University of Technology;
(pp.195-198) Received: May 31st, 2011, Accepted: October 26th, 2011
pdfr


05 Evaluation of Laser Drilling of Ni Film on Silicon for Solid Oxide Fuel Cells [DOI: 10.2961/jlmn.2011.03.0005]
Mindaugas Maciulevičius, Center for Physical Sciences and Technology; Bogdan Voisiat, Center for Physical Sciences and Technology; Mindaugas Gedvilas, Center for Physical Sciences and Technology; Brigita Abakevičienė, Institute of Material Science, Kaunas University of Technology; Sigitas Tamulevičius, Institute of Material Science, Kaunas University of Technology; Gediminas Račiukaitis, Center for Physical Sciences and Technology;
(pp.199-203) Received: June 7th, 2011, Accepted: October 31st, 2011
pdfr


06 Laser-Induced Backside Wet Etching Employing Green DPSS Laser and Liquid Metallic Absorber [DOI: 10.2961/jlmn.2011.03.0006]
Tadatake Sato, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Yoshizo Kawaguchi, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Ryozo Kurosaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Aiko Narazaki, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Wataru Watanabe, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.204-208) Received: June 6th, 2011, Accepted: November 3rd, 2011
pdfr


07 Hybrid Micromachining of Transparent Sapphire Substrate by Pulsed Green Laser Irradiation [DOI: 10.2961/jlmn.2011.03.0007]
X. Z. Xie, Faculty of Electromechanical Engineering, Guangdong University of Technology; Z. Y. Pan, Data Storage Institute; X. Wei, Faculty of Electromechanical Engineering, Guangdong University of Technology; F. M. Huang, Faculty of Electromechanical Engineering, Guangdong University of Technology; W. Hu, Faculty of Electromechanical Engineering, Guangdong University of Technology; M. H. Hong, Department of Electrical and Computer Engineering, National University of Singapore;
(pp.209-213) Received: June 2nd, 2011, Accepted: November 9th, 2011
pdfr


08 Development of a Laser-Assisted Chemical Vapor Deposition System for the Growth of Carbon Nanotubes [DOI: 10.2961/jlmn.2011.03.0008]
Takashi Uchida, Faculty of Science and Engineering, Toyo University; Yoshikazu Yoshida, Faculty of Science and Engineering, Toyo University;
(pp.214-219) Received: June 6th, 2011, Accepted: November 14th, 2011
pdfr


09 Detecting Plasma Produced by Laser in a Micromachining System as In-process Control [DOI: 10.2961/jlmn.2011.03.0009]
Cinthya Toro, Comisión Nacional de Energía Atómica (CNEA), Dept. de Micro y Nanotecnología; Carlos Lasorsa, Comisión Nacional de Energía Atómica (CNEA), Dept. de Micro y Nanotecnología; Carlos Rinaldi, Comisión Nacional de Energía Atómica (CNEA), Dept. de Micro y Nanotecnología;
(pp.220-224) Received: July 22nd, 2011, Accepted: November 18th, 2011
pdfr


10 Effects of Superposed Continuous Diode Laser on Welding Characteristics for Aluminum Alloy in Pulsed Nd:YAG Laser Welding [DOI: 10.2961/jlmn.2011.03.0010]
Kazuya Miura, Graduate School of Natural Science and Technology, Okayama University; Yasuhiro Okamoto, Graduate School of Natural Science and Technology, Okayama University; Tomokazu Sakagawa, Advanced Laser Research Laboratory, Kataoka Corporation; Yoshiyuki Uno*, Graduate School of Natural Science and Technology, Okayama University; Shinichi Nakashiba, Advanced Laser Research Laboratory, Kataoka Corporation;
(pp.225-230) Received: June 7th, 2010, Accepted: October 13th, 2011
pdfr


11 High-Efficiency Second Harmonic Generation of Mode-Locked Picosecond Ti:sapphire Laser Using BiB₃O₆ Crystal with External Enhancement Cavity [DOI: 10.2961/jlmn.2011.03.0011]
Yuma Takida, Graduate School of Engineering, Osaka City University; Tatsuya Ohira, Graduate School of Engineering, Osaka City University; Shingo Maeda, Graduate School of Engineering, Osaka City University; Hiroshi Kumagai, Graduate School of Engineering, Osaka City University;
(pp.231-234) Received: May 24th, 2011, Accepted: November 8th, 2011
pdfr


12 Micromachining of Polymethylmethacrylate and Polydimethylsiloxane Using Laser Plasma Soft X-rays [DOI: 10.2961/jlmn.2011.03.0012]
Shuichi Torii, Institute of Applied Physics, University of Tsukuba; Tetsuya Makimura, Institute of Applied Physics, University of Tsukuba; Kota Okazaki, Graduate School of Information Sciences and Electrical Engineering, Kyushu University; Daisuke Nakamura, Graduate School of Information Sciences and Electrical Engineering, Kyushu University; Akihiko Takahashi, Department of Health Sciences, School of Medicine, Kyushu University; Tatsuo Okada, Graduate School of Information Sciences and Electrical Engineering, Kyushu University; Hiroyuki Niino, Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology; Kouichi Murakami, Institute of Applied Physics, University of Tsukuba;
(pp.235-238) Received: June 30th, 2011, Accepted: November 14th, 2011
pdfr


13 Multipoint Focusing of Single Ultrafast Laser Pulses [DOI: 10.2961/jlmn.2011.03.0013]
Cyril Mauclair, Laboratoire Hubert Curien (UMR 5516 CNRS), Université de Lyon, Université de Saint-Etienne; Alexandre Mermillod-Blondin, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Arkadi Rosenfeld, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Ingolf V. Hertel, Max-Born Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Eric Audouard, Laboratoire Hubert Curien (UMR 5516 CNRS), Université de Lyon, Université de Saint-Etienne; Isamu Miyamoto, Osaka University; Razvan Stoian, Laboratoire Hubert Curien (UMR 5516 CNRS), Université de Lyon, Université de Saint-Etienne;
(pp.239-244) Received: August 2nd, 2011, Accepted: November 21st, 2011
pdfr


14 Femtosecond Laser-Assisted Etching of Fluoride Crystals [DOI: 10.2961/jlmn.2011.03.0014]
Shigeki Matsuo, Department of Ecosystem Engineering, The University of Tokushima; Kodai Iwasa, Department of Ecosystem Engineering, The University of Tokushima; Takuro Tomita, Department of Ecosystem Engineering, The University of Tokushima; Shuichi Hashimoto, Department of Ecosystem Engineering, The University of Tokushima; Tatsuya Okada, Department of Mechanical Engineering, The University of Tokushima;
(pp.245-248) Received: June 13th, 2011, Accepted: December 7th, 2011
pdfr


15 Picosecond Laser Direct Patterning of Poly(3,4-ethylene dioxythiophene)-Poly(styrene sulfonate) (PEDOT:PSS) Thin Films [DOI: 10.2961/jlmn.2011.03.0015]
Shizhou Xiao, Applied Laser Technologies, Ruhr University Bochum; Susana Abreu Fernandes, Applied Laser Technologies, Ruhr University Bochum; Cemal Esen, Applied Laser Technologies, Ruhr University Bochum; Andreas Ostendorf, Applied Laser Technologies, Ruhr University Bochum;
(pp.249-254) Received: June 17th, 2011, Accepted: December 7th, 2011
pdfr


16 Novel Butterfly Type Laser Module Packaging Employing Nd:YAG Laser and Separated Clip of Stainless Steel [DOI: 10.2961/jlmn.2011.03.0016]
Yi-Cheng Hsu, Department of Biomechatronics Engineering, National Pingtung University of Science and Technology; Shi-Ping Hong, Department of Biomechatronics Engineering, National Pingtung University of Science and Technology, ;
(pp.255-258) Received: January 5th, 2011, Accepted: October 10th, 2011
pdfr


17 (Technical Communication) Impact of Laser Hole Drilling on the Fracture Strength of Metal Wrap-Through (MWT) Solar Cells [DOI: 10.2961/jlmn.2011.03.0017]
Kyumin Lee, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.; Jong-Keun Lim, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.; Sang-Kyun Kim, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.; In-Sik Moon, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.; Won-Jae Lee, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.; Eun-Chel Cho, Hyundai Electro-Mechanical Research Institute (HEMRI), Hyundai Heavy Industries Co. Ltd.;
(pp.260-264) Received: June 3rd, 2011, Accepted: November 30th, 2011
pdfr


18 (Technical Communication) A New Approach to Characterizing Surface Texturing of Crystalline Silicon Wafers for High Efficiency Solar Cells Application [DOI: 10.2961/jlmn.2011.03.0018]
Chil-Chyuan Kuo, Department of Mechanical Engineering and Graduate Institute of Electro-Mechanical Engineering, Ming Chi University of Technology; Yi- Ruei Chen, Department of Mechanical Engineering and Graduate Institute of Electro-Mechanical Engineering, Ming Chi University of Technology;
(pp.265-269) Received: May 23rd, 2011, Accepted: December 1st, 2011
pdfr


↑page top