jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 6, No. 2. (September, 2011)


01 Peculiarities of Ruby Synthesized from Al2O3-Cr2O3 Powder Mixture by Selective Laser Sintering [DOI: 10.2961/jlmn.2011.02.0001]
M. Vlasova, Research Center in Engineering and Applied Sciences of the Autonomous University of the State of Morelos (CIICAp-UAEMor); M. Kakazey, Research Center in Engineering and Applied Sciences of the Autonomous University of the State of Morelos (CIICAp-UAEMor); P. A. Márquez Aguilar, Research Center in Engineering and Applied Sciences of the Autonomous University of the State of Morelos (CIICAp-UAEMor); E .A. Juarez Arellanoa, Research Center in Engineering and Applied Sciences of the Autonomous University of the State of Morelos (CIICAp-UAEMor); R. Guardian Tapia, Research Center in Engineering and Applied Sciences of the Autonomous University of the State of Morelos (CIICAp-UAEMor); V. Stetsenko, Institute for Problems of Materials Science, National Academy of Sciences of Ukraine; A. Ragulya, Institute for Problems of Materials Science, National Academy of Sciences of Ukraine; A. Bykov, Institute for Problems of Materials Science, National Academy of Sciences of Ukraine; I. Timofeeva, Institute for Problems of Materials Science, National Academy of Sciences of Ukraine;
(pp.96-104) Received: November 17th, 2010, Accepted: March 15th, 2011
pdfr


02 A solution to Laser-induced Heat Equation inside a Two-layer Tissue Model Using Boubaker Polynomials Expansion Scheme [DOI: 10.2961/jlmn.2011.02.0002]
M.A. Aweda, Department of Radiation Biology and Radiotherapy, College of Medicine of the University of Lagos ; M. Agida, Department of Physics, Federal University of Technology; M. Dada, Department of Physics, Federal University of Technology; O. B. Awojoyogbe, Department of Physics, Federal University of Technology; K. Isah, Department of Physics, Federal University of Technology; O.P. Faromika, Department of Physics, Federal University of Technology; K. Boubaker, Unité de Physique de Dispositifs à Semiconducteurs -UPDS- ; K. De, Department of Physics, Federal University of Technology; O.S. Ojambati, Department of Physics, Federal University of Technology;
(pp.105-109) Received: January 11th, 2011, Accepted: March 22nd, 2011
pdfr


03 Joining of Thin Films on Flexible Substrates with Nanosecond Laser Pulses [DOI: 10.2961/jlmn.2011.02.0003]
Martin Ehrhardt, Leibniz-Institute of Surface Modification; Klaus Zimmer, Leibniz-Institute of Surface Modification;
(pp.110-112) Received: June 7th, 2010, Accepted: April 2nd, 2011
pdfr


04 Modular EUV Source for the Next Generation Lithography [DOI: 10.2961/jlmn.2011.02.0004]
Olivier Sublemontier, Marylène Rosset-Kos, Tiberio Ceccotti, Jean-François Hergott, Thierry Auguste, Didier Normand, Martin Schmidt, Commissariat à l’Energie Atomique, DSM/IRAMIS/SPAM; François Beaumont, Daniel Farcage, Guy Cheymol, Jean-Marc Le Caro, Philippe Cormont, Patrick Mauchien, Pierre-Yves Thro, Commissariat à l' Energie Atomique, DEN/DPC/SCP; Jacky Skrzypczak, Sophie Muller, Emanuel Marquis, Thales Laser, Domaine de Corbeville; Benoît Barthod, Isabelle Gaurand, Magali Davenet, Roland Bernard, Alcatel Vacuum Technology France;
(pp.113-118) Received: October 6th, 2010, Accepted: May 12th, 2011
pdfr


05 Diffuse Phase Transition in Ba(SnxTi1-x) Ceramics and Thin Films [DOI: 10.2961/jlmn.2011.02.0005]
Takanori Hino, Environmental Materials Science and Engineering, Niihama National College of Technology,; Teruhiko Sugioka, Graduate School of Engineering, Ehime University; Seisyou Tamura, Advanced Engineering Course, Niihama National College of Technology; Minoru Nishida, Kochi prefectural industrial technology center; Takao Araki, Toyo Industrial Creative Center,;
(pp.119-123) Received: October 21st, 2010, Accepted: May 18th, 2011
pdfr


06 Design of Bi-functional Bioconjugated Gold Nanoparticles by Pulsed Laser Ablation with Minimized Degradation [DOI: 10.2961/jlmn.2011.02.0006]
Annette Barchanski, Laser Zentrum Hannover e.V., Nanotechnology Department; Csaba Laszlo Sajti, Laser Zentrum Hannover e.V., Nanotechnology Department; Camilla Sehring, Laser Zentrum Hannover e.V., Nanotechnology Department; Svea Petersen, Laser Zentrum Hannover e.V., Nanotechnology Department; Stephan Barcikowski, University of Duisburg-Essen, Institute of Technical Chemistry;
(pp.124-130) Received: June 7th, 2010, Accepted: June 13th, 2011
pdfr


07 Real Time Closed Loop Control of Full Penetration Keyhole Welding with Cellular Neural Network Cameras [DOI: 10.2961/jlmn.2011.02.0007]
F. Abt, FGSW Forschungsgesellschaft für Strahlwerkzeuge gGmbH; A. Blug, Fraunhofer Institute for Physical Measurement Techniques IPM; L. Nicolosi, IEE Institut fuer Grundlagen der Elektrotechnik u. Elektronik; F. Dausinger, Dausinger & Giesen GmbH; H. Höfler, Fraunhofer Institute for Physical Measurement Techniques IPM; R. Tetzlaff, IEE Institut fuer Grundlagen der Elektrotechnik u. Elektronik; R. Weber, IFSW Institut fuer Strahlwerkzeuge;
(pp.131-137) Received: July 8th, 2009, Accepted: June 28th, 2011
pdfr


08 Emission Data and Costs for Environmental Measures During Laser Joining of Metals [DOI: 10.2961/jlmn.2011.02.0008]
Jürgen Walter , Laser Zentrum Hannover e.V. (LZH); Michael Hustedt, Laser Zentrum Hannover e.V. (LZH); Christian Hennigs, Laser Zentrum Hannover e.V. (LZH); Johannes Stein, Laser Zentrum Hannover e.V. (LZH); Stephan Barcikowski, Laser Zentrum Hannover e.V. (LZH);
(pp.138-144) Received: June 7th, 2010, Accepted: July 5th, 2011
pdfr


09 Laser-induced Plasma Investigations during Material Processing [DOI: 10.2961/jlmn.2011.02.0009]
David Diego-Vallejo, Technical University of Berlin, Optics Institute; Manuela Schwagmeier, Laser-und Medizin-Technologie Berlin GmbH (LMTB), Applied Laser Technology; David Ashkenasi, Laser-und Medizin-Technologie Berlin GmbH (LMTB), Applied Laser Technology; Gerd Illing, Laser-und Medizin-Technologie Berlin GmbH (LMTB), Applied Laser Technology; Hans Joachim Eichler, Technical University of Berlin, Optics Institute;
(pp.146-150) Received: June 7th, 2010, Accepted: July 6th, 2011
pdfr


10 Laser Induced Forward Transfer (LIFT) of Materials using 40 ps Pulses-Experimental and Quantitative Modelisation Study
Saad Al Tarazi, University of Milano-Bicocca; Yas Al Hadeethi, Dept. of Physics, King Abdul Aziz University; Luca Volpe, University of Milano-Bicocca; Luca Antonelli, University of Milano-Bicocca; Bruno Vodopivec, University of Milano-Bicocca; Rashida Jafer, University of Milano-Bicocca; Marialuisa Vitobello, European Jewellery Technology Network EJTN-GEIE; Munawer Iqbal, Centre for High Energy Physics, University of the Punjab; Shahid Hussain, National Tokamak Fusion Program; Dimitri Batani, Centre Lasers Intenses et Applications, Université Bordeaux;
(pp.151-157) Received: January 20th, 2011, Accepted: July 11th, 2011
pdfr


11 Directional Writing Dependence of Birefringence in Multicomponent Silica-based Glasses with Ultrashort Laser Irradiation [DOI: 10.2961/jlmn.2011.02.0011]
Chaxing Fan, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology; Bertrand Poumellec, Institut de Chimie Moléculaire et des Matériaux d'Orsay (ICMMO); Huidan Zeng, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology; Matthieu Lancry, Institut de Chimie Moléculaire et des Matériaux d'Orsay (ICMMO); Weijia Yang, Institut de Chimie Moléculaire et des Matériaux d'Orsay (ICMMO); Bernard Bourguignon, Institut des Sciences Moléculaires d’Orsay, CNRS and Université de Paris Sud 11; Guorong Chen, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology;
(pp.158-163) Received: June 7th, 2010, Accepted: August 18th, 2011
pdfr


12 Rewriting Process of Lower Electrical Resistance Lines on TiO2 Film using Methods of Whitening with Electric Furnace and Darkening with Femtosecond Laser [DOI: 10.2961/jlmn.2011.02.0012]
Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University; Togo Shinonaga, Graduate school of Engineering, Osaka University; Nobuyuki Abe, Joining and Welding Research Institute, Osaka University; Masanari Takahashi, Osaka Municipal Technical Research Institute; Minoru Yoshida, School of Science and Engineering, Kinki University; Hitoshi Nakano, School of Science and Engineering, Kinki University; Masayuki Fujita, Institute for Laser Technology;
(pp.164-167) Received: March 16th, 2011, Accepted: August 30th, 2011
pdfr


13 (Technical Communication) Water Jet Guided Laser Cutting of Silicon Thin Films Using 515nm Disk Laser [DOI: 10.2961/jlmn.2011.02.0013]
Eva-Maria Heilmann, University of Applied Sciences Aschaffenburg; Albrecht Seidl, Schott Solar Wafer GmbH; Ralf Hellmann, University of Applied Sciences Aschaffenburg;
(pp.168-173) Received: April 7th, 2011, Accepted: May 21st, 2011
pdfr


14 (Technical Communication) Effects of Irradiation with a CO2 Laser on Surface Structure and Bonding of a Zirconia Ceramic to Dental Resin Cement [DOI:10.2961/jlmn.2011.02.0014]
Y. Maruo, Occlusion and Removable Prosthodontics, Okayama Univ. Hosp.; G. Nishigawa, Occlusion and Removable Prosthodontics, Okayama Univ. Hosp.; M. Irie, Dept. of Biomaterials, Okayama Univ.Graduate School of Medicine, Dentistry and Pharmaceutical Sciences; Y. Yamamoto, Dept. of Occlusal and Oral Functional Rehabilitation, Okayama Univ.Graduate School of Medicine, Dentistry and Pharmaceutical Sciences; K. Yoshihara, Leuven BIOMAT Research Cluster, Dept of Conservative Dentistry, Catholic Univ. of Leuven; S. Minagi, Dept. of Occlusal and Oral Functional Rehabilitation, Okayama Univ. Graduate School of Medicine, Dentistry and Pharmaceutical Sciences;
(pp.174-179) Received: April 15th, 2011, Accepted: June 30th, 2011
pdfr


↑page top