jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 5, No. 2. (June, 2010)


01 Blue Light Emitting Silicon Nanocrystals Prepared by Laser Ablation of Doped Si Wafers in Water [DOI: 10.2961/jlmn.2010.02.0001]
Vladimir Svrcek, Novel Si Material Team, Research Center for Photovoltaics, National Institute of Advanced Industrial Science and Technology (AIST); Michio Kondo, Novel Si Material Team, Research Center for Photovoltaics, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.103-108) Received: June 26th, 2009, Accepted: February 27th, 2010
pdfr


02 Crack Propagation Analysis in Laser Scribing of Glass [DOI: 10.2961/jlmn.2010.02.0002]
Keisuke Yahata, Mitsuboshi Diamond Industrial Co.,LTD.; Koji Yamamoto, Mitsuboshi Diamond Industrial Co.,LTD.; Etsuji Ohmura, Division of Materials and Manufacturing Science, Osaka University;
(pp.109-114) Received: July 31st, 2009, Accepted: March 1st, 2010
pdfr


03 Fabrication of Frequency-Selective Surface Structures by Femtosecond Laser Ablation of Gold Films [DOI: 10.2961/jlmn.2010.02.0003]
Vygantas Mizeikis, Division of Global Research Leaders and Research Institute of Electronics , Shizuoka University; Saulius Juodkazis, Research Institute for Electronic Science (RIES), Hokkaido University; Kai Sun, Hokkaido Innovation Through Nanotechnology Support (HINTS) and Research Institute for Electronic Science (RIES), Hokkaido University; Hiroaki Misawa, Research Institute for Electronic Science (RIES), Hokkaido University;
(pp.115-120) Received: July 10th, 2009, Accepted: March 3rd, 2010
pdfr


04 Measurement of Rotational Temperature in a Molecular Beam with Femtosecond Laser Pulses [DOI:10.2961/jlmn.2010.02.0004]
Kazumichi Yoshii, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University; Godai Miyaji, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University; Kenzo Miyazaki, Advanced Laser Science Research Section, Institute of Advanced Energy, Kyoto University;
(pp.121-124) Received: July 10th, 2009, Accepted: March 15th, 2010
pdfr


05 Ablation of SiN Passivation Layers on Photovoltaic Cells with Femtosecond Laser Source [DOI: 10.2961/jlmn.2010.02.0005]
K.Stolberg, Jenoptik Laser, Optik, Systeme GmbH; S.Friedel, Jenoptik Laser, Optik, Systeme GmbH; B.Kremser, Jenoptik Laser, Optik, Systeme GmbH; M.Leitner, Jenoptik Laser, Optik, Systeme GmbH; Y.Atsuta, Optopia Co.Ltd.;
(pp.125-127) Received: July 10th, 2009, Accepted: March 16th, 2010
pdfr


06 Material Processing with a 3kW Single Mode Fibre Laser [DOI:10.2961/jlmn.2010.02.0006]
Lars Hartwig, University of Applied Sciences Mittweida, Laser Application Centre; Robby Ebert, University of Applied Sciences Mittweida, Laser Application Centre; Sascha Kloetzer, University of Applied Sciences Mittweida, Laser Application Centre; Sebastian Weinhold, University of Applied Sciences Mittweida, Laser Application Centre; Jan Drechsel, University of Applied Sciences Mittweida, Laser Application Centre; Frank Peuckert, University of Applied Sciences Mittweida, Laser Application Centre; Joerg Schille, University of Applied Sciences Mittweida, Laser Application Centre; Horst Exner, University of Applied Sciences Mittweida, Laser Application Centre;
(pp.128-133) Received: July 24th, 2009, Accepted: April 12th, 2010
pdfr


07 Fabrication of Cotton-like Superhydrophobic Surface on Teflon Using a Pulsed Ultraviolet Laser [DOI: 10.2961/jlmn.2010.02.0007]
Y. Kawamura , Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology; T. Nakafuji, Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology;
(pp.134-137) Received: March 20th, 2010, Accepted: April 12th, 2010
pdfr


08 Extending the Limits of Laser Polymer Welding using Advanced Irradiation Strategies [DOI: 10.2961/jlmn.2010.02.0008]
Andrei Boglea, Fraunhofer Institute for Laser Technology; Alexander Olowinsky, Fraunhofer Institute for Laser Technology; Arnold Gillner, Fraunhofer Institute for Laser Technology;
(pp.138-144) Received: July 20th, 2009, Accepted: March 25th, 2010
pdfr


09 3D-Microstructuring of Sapphire using fs-Laser Irradiation and Selective Etching [DOI:10.2961/jlmn.2010.02.0009]
Maren Hörstmann-Jungemann, Lehrstuhl für Lasertechnik (LLT), RWTH Aachen University; Jens Gottmann , Lehrstuhl für Lasertechnik (LLT), RWTH Aachen University; Martin Keggenhoff, Lehrstuhl für Lasertechnik (LLT), RWTH Aachen University;
(pp.145-149) Received: July 10th, 2009, Accepted: April 13th, 2010
pdfr


10 Investigation on Laser-annealing and Subsequent Laser-nanotexturing of Amorphous Silicon (a-Si) Films for Photovoltaic Application [DOI: 10.2961/jlmn.2010.02.0010]
I.A. Palani, Department of Mechanical Engineering, Indian Institute of Technology Madras; N.J. Vasa, Department of Engineering Design, Indian Institute of Technology Madras; M. Singaperumal, Department of Mechanical Engineering, Indian Institute of Technology Madras; T. Okada, Graduate School of Information Science and Electrical Engineering (ISEE), Kyushu University ;
(pp.150-155) Received: July 10th, 2009, Accepted: May 11th, 2010
pdfr


11 Flattop Beam Generation and Multibeam Processing Using Aspheric and Diffractive Optics [DOI: 10.2961/jlmn.2010.02.0011]
Keiji Fuse, Sumitomo Electric Hardmetal Corp.;
(pp.156-162) Received: July 13th, 2009, Accepted: May 11th, 2010
pdfr


12 Various Kinds of Pulsed Ultraviolet Laser Micromachinings Using a Five Axis Microstage [DOI: 10.2961/jlmn.2010.02.0012]
Yoshiyuki Kawamura, Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology; Akihiro Kai , Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology; Keita Yoshii, Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology;
(pp.163-168) Received: April 8th, 2010, Accepted: May 22nd, 2010
pdfr


13 Influence of Mechanical and Thermal Material Properties on Laser-Produced Crater-Morphology and their Study by Focused Ion Beam & Scanning Electron Microscope Imaging [DOI: 10.2961/jlmn.2010.02.0013]
D. Bigoni, Department of Material Science and FIB-SEM ‘Bombay’ Lab, University of Milano-Bicocca ; M. Milani, Department of Material Science and FIB-SEM ‘Bombay’ Lab, University of Milano-Bicocca ; R. Jafer, Department of Physics “G.Occhialini”, University of Milano-Bicocca; C. Liberatore, Department of Physics “G.Occhialini”, University of Milano-Bicocca; S. Tarazi, Department of Physics “G.Occhialini”, University of Milano-Bicocca; L. Antonelli, Department of Physics “G.Occhialini”, University of Milano-Bicocca; D. Batani, Department of Physics “G.Occhialini”, University of Milano-Bicocca;
(pp.169-174) Received: February 10th, 2010, Accepted: May 25th, 2010
pdfr


14 (Technical Communication) Femtosecond and Nanosecond Laser Peening of Stainless Steel [DOI: 10.2961/jlmn.2010.02.0014]
Hitoshi Nakano, School of Science and Engineering, Kinki University; Miho Tsuyama, School of Science and Engineering, Kinki University; Sho Miyauti, School of Science and Engineering, Kinki University; Toshiya Shibayanagi, Joining and Welding Research Institute, Osaka University; Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University; Nobuyuki Abe, Joining and Welding Research Institute, Osaka University;
(pp.175-178) Received: July 9th, 2009, Accepted: February 27th, 2010
pdfr


15 (Technical Communication) Micro Three-dimensional Removal Processing inside Sapphire Substrate [DOI: 10.2961/jlmn.2010.02.0015]
Kensuke Tokumi, Department of Ecosystem Engineering, The University of Tokushima; Shigeki Matsuo, Department of Ecosystem Engineering, The University of Tokushima; Satoshi Kiyama, Department of Ecosystem Engineering, The University of Tokushima; Takuro Tomita, Department of Ecosystem Engineering, The University of Tokushima; Shuichi Hashimoto, Department of Ecosystem Engineering, The University of Tokushima;
(pp.179-182) Received: February 12th, 2010, Accepted: May 27th, 2010
pdfr


↑page top