jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 2, No. 1. (March, 2007)


01 Patterning of ITO Layer on Glass with High Repetition Rate Picosecond Lasers [DOI: 10.2961/jlmn.2007.01.0001]
Gediminas Raciukaitis, Laboratory for Applied Research, Institute of Physics; Marijus Brikas, Laboratory for Applied Research, Institute of Physics; Mindaugas Gedvilas, Laboratory for Applied Research, Institute of Physics; Gediminas Darcianovas, Laboratory for Applied Research, Institute of Physics;
(pp.1-6) Received: May 16th, 2006, Accepted: December 20th, 2006
pdfr


02 Local Melting of Glass Material and Its Application to Direct Fusion Welding by Ps-laser Pulses [DOI: 10.2961/jlmn.2007.01.0002]
Isamu Miyamoto, Osaka University; Alexander Horn, Lehrstuhl für Lasertechnik, RWTH-Aachen; Jens Gottmann, Lehrstuhl für Lasertechnik, RWTH-Aachen;
(pp.7-14) Received: July 11th, 2006, Accepted: January 9th, 2007
pdfr


03 Aggregation of Silicon Nanocrystals Prepared by Laser Ablation in Deionized Water [DOI: 10.2961/jlmn.2007.01.0003]
Vladimir Svrcek, Nanoarchitectonics Research Center, AIST; Takeshi Sasaki, Nanoarchitectonics Research Center, AIST; Yoshiki Shimizu, Nanoarchitectonics Research Center, AIST; Naoto Koshizaki, Nanoarchitectonics Research Center, AIST;
(pp.15-20) Received: May 16th, 2006, Accepted: January 11th, 2007
pdfr


04 Laser Direct-Write of Metallic Nanoparticle Inks [DOI: 10.2961/jlmn.2007.01.0004]
Raymond C. Y. Auyeung, Materials Science and Technology Division, Naval Research Laboratory; Heungsoo Kim, Materials Science and Technology Division, Naval Research Laboratory; Scott A. Mathews, Department of Electrical Engineering, The Catholic University of America; Alberto Piqué, Materials Science and Technology Division, Naval Research Laboratory;
(pp.21-25) Received: June 5th, 2006, Accepted: January 11th, 2007
pdfr


05 Structural Modification in Borosilicate Glass by Use of Femtosecond Fiber Laser at 1.56 µm [DOI: 10.2961/jlmn.2007.01.0005]
Takayuki Tamaki, Department of Material and Life Science, Graduate School of Engineering, Osaka University; Wataru Watanabe, Photonics Research Institute, National Institute of Advanced Industrial Science and Technology; Kazuyoshi Itoh, Department of Material and Life Science, Graduate School of Engineering, Osaka University;
(pp.26-30) Received: May 30th, 2006, Accepted: January 17th, 2007
pdfr


06 Nanofabrication with Laser Holographic Lithograpy for Nanophotonic Structures [DOI: 10.2961/jlmn.2007.01.0006]
Jong-Souk Yeo, Hewlett-Packard Company; Henry Lewis, Hewlett-Packard Company; Neal Meyer, Hewlett-Packard Company;
(pp.31-35) Received: June 4th, 2006, Accepted: January 17th, 2007
pdfr


07 Micro-modification of Metal-doped Glasses by a Femtosecond Laser [DOI: 10.2961/jlmn.2007.01.0007]
Bin Hua, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Masayuki Nishi, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Kazuyuki Hirao, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
(pp.36-39) Received: May 16th, 2006, Accepted: February 1st, 2007
pdfr


08 Composition Change of Glass Materials in Microlenses Formed by CO2 Laser [DOI: 10.2961/jlmn.2007.01.0008]
Hiroshi Murotani, Department of Optical and Imaging Science & Technology, Tokai University; Tomoko Yamabe, Department of Optical and Imaging Science & Technology, Tokai University; Kenjiro Nakamoto, Department of Optical and Imaging Science & Technology, Tokai University; Moriaki Wakaki, Department of Optical and Imaging Science & Technology, Tokai University;
(pp.40-43) Received: May 16th, 2006, Accepted: February 2nd, 2007
pdfr


09 Investigation on Laser Micro Ablation of Steel Using Short and Ultrashort IR Multipulses [DOI: 10.2961/jlmn.2007.01.0009]
Claudia Anna Hartmann, Fraunhofer Institut für Lasertechnik; Torsten Fehr, Fraunhofer Institut für Lasertechnik; Mihael Brajdic, Lehrstuhl für Lasertechnik der RWTH Aachen; Arnold Gillner, Fraunhofer Institut für Lasertechnik;
(pp.44-48) Received: May 16th, 2006, Accepted: February 2nd, 2007
pdfr


10 Laser Direct Write of Active Thin-Films on Glass for Industrial Flat Panel Display Manufacture [DOI: 10.2961/jlmn.2007.01.0010]
Matt Henry, Powerlase Ltd.; Paul M. Harrison, Powerlase Ltd.; Jozef Wendland., Powerlase Ltd.;
(pp.49-56) Received: May 16th, 2006, Accepted: February 5th, 2007
pdfr


11 Fusion Welding of Glass Using Femtosecond Laser Pulses with High-repetition Rates [DOI: 10.2961/jlmn.2007.01.0011]
Isamu Miyamoto, Osaka University ; Alexander Horn, Lehrstuhl für Lasertechnik, RWTH-Aachen; Jens Gottmann, Lehrstuhl für Lasertechnik, RWTH-Aachen; Dirk Wortmann, Lehrstuhl für Lasertechnik, RWTH-Aachen; Fumiyo Yoshino, Applications Research Laboratory, IMRA America, Inc.;
(pp.57-63) Received: July 11th, 2006, Accepted: February 7th, 2007
pdfr


12 Variable Pulse Duration Laser for Material Processing [DOI: 10.2961/jlmn.2007.01.0012]
Werner Wiechmann, JDSU Corporation; Loren Eyres, JDSU Corporation; James Morehead, JDSU Corporation; Jeffrey Gregg, JDSU Corporation; Derek Richard, JDSU Corporation; Will Grossman, JDSU Corporation;
(pp.64-68) Received: May 16th, 2006, Accepted: February 20th, 2007
pdfr


13 Characterization of Laser Induced Charging Damage in Laser Micromachining [DOI: 10.2961/jlmn.2007.01.0013]
Jong-Souk Yeo, Hewlett-Packard Company;
(pp.69-75) Received: June 4th, 2006, Accepted: February 20th, 2007
pdfr


14 Theoretical Models and Qualitative Interpretations of Fs Laser Material Processing [DOI: 10.2961/jlmn.2007.01.0014]
Nadezhda M. Bulgakova, Institute of Thermophysics SB RAS; Igor M. Burakov, Institute of Thermophysics SB RAS; Yuri. P. Meshcheryakov, Design and Technology Branch of Lavrentyev Institute of Hydrodynamics SB RAS; Razvan Stoian, Laboratoire TSI, Universite Jean Monnet; Arkadi Rosenfeld, Max-Born-Institut für Nichtlineare Optik und Kurzzeitspektroskopie; Ingolf V. Hertel, Max-Born-Institut für Nichtlineare Optik und Kurzzeitspektroskopie;
(pp.76-86) Received: May 16th, 2006, Accepted: February 23rd, 2007
pdfr


15 Effects of Pulse Delay in Metal Micromachining with Femtosecond Laser Pulses [DOI: 10.2961/jlmn.2007.01.0015]
Jaegu Kim, Nanomachining team, Korea Institute of Machinery & Materials; Sunghak Cho, Nanomachining team, Korea Institute of Machinery & Materials; Wonseok Chang, Nanomachining team, Korea Institute of Machinery & Materials; Suckjoo NA, Korea Advanced Institute of Science and Technology; Kyunghyun Whang, Nanomachining team, Korea Institute of Machinery & Materials;
(pp.87-90) Received: May 16th, 2006, Accepted: March 15th, 2007
pdfr


16 Laser Welding of Ta Sheath for a Thermocouple Wire for an Instrumented Fuel Irradiation Test [DOI: 10.2961/jlmn.2007.01.0016]
Soo-Sung Kim, Department of Dry Process Nuclear Fuel Development, Korea Atomic Energy Research Institute; Chul-Yong Lee, Department of Dry Process Nuclear Fuel Development, Korea Atomic Energy Research Institute; Woong-Ki Kim, Department of Dry Process Nuclear Fuel Development, Korea Atomic Energy Research Institute; Geun-Il Park, Department of Dry Process Nuclear Fuel Development, Korea Atomic Energy Research Institute; Jinh-Yun Koh, Department of Materials Engineering, Korea University of Technology & Education;
(pp.91-94) Received: May 16th, 2006, Accepted: March 16th, 2007
pdfr


17 Determination of the Optimum Welding Parameters for a Laser Welded Spacer Grid Assembly for PWRs [DOI: 10.2961/jlmn.2007.01.0017]
Kee-nam Song, Korea Atomic Energy Research Institute; Soo-sung Kim, Korea Atomic Energy Research Institute;
(pp.95-99) Received: May 16th, 2006, Accepted: March 16th, 2007
pdfr


18 Change in the UV-VIS Absorbance of Amino Acids as a Result of Femtosecond Laser Irradiation [DOI: 10.2961/jlmn.2007.01.0018]
Hitoshi Nakano, School of Science and Engineering, Kinki University; Norimitsu Tamai, School of Science and Engineering, Kinki University; Masahiro Nii, School of Science and Engineering, Kinki University; Masahiro Tsukamoto, Joining and Welding Research Institute, Osaka University; Nobuyuki Abe, Joining and Welding Research Institute, Osaka University;
(pp.100-102) Received: May 16th, 2006, Accepted: March 19th, 2007
pdfr


19 Use of Laser Direct-Write in Microelectronics Assembly [DOI: 10.2961/jlmn.2007.01.0019]
Alberto Piqué, Materials Science and Technology Division, Naval Research Laboratory; Scott A. Mathews, Department of Electrical Engineering, The Catholic University of America; Ray C. Y. Auyeung, Materials Science and Technology Division, Naval Research Laboratory;
(pp.103-107) Received: June 5th, 2006, Accepted: March 21st, 2007
pdfr


20 Optimization of Nd:YAG Laser Welding of Magnesium [DOI: 10.2961/jlmn.2007.01.0020]
Arif Demir, Laser Technologies Research and Application Center, University of Kocaeli; Erhan Akman, Laser Technologies Research and Application Center, University of Kocaeli; Timur Canel, Laser Technologies Research and Application Center, University of Kocaeli; Sarp Ertürk, Laser Technologies Research and Application Center, University of Kocaeli; Ali Arslan Kaya, TUBITAK-MAM, Material Institute, Gebze; Necla Kenar, Laser Technologies Research and Application Center, University of Kocaeli; Tamer Sinmazçelik, Laser Technologies Research and Application Center, University of Kocaeli; Oguzhan Urhan, Laser Technologies Research and Application Center, University of Kocaeli;
(pp.108-113) Received: May 17th, 2006, Accepted: March 26th, 2007
pdfr


↑page top