jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 14, No. 1. (April, 2019)


01 Evaluation of Key Geometrical and Mechanical Properties for Remote Laser Welded AC-170PX Aluminium Joints [DOI: 10.2961/jlmn.2019.01.0001]
Abhishek Das, WMG, The University of Warwick; Ian Butterworth, WMG, The University of Warwick; Iain Masters, WMG, The University of Warwick; David Williams, WMG, The University of Warwick;
(pp.1-7) Received: April 22nd, 2018, Accepted: December 27th, 2018
pdfr


02 Early Stage Material Motion and Transient Optical Properties of Metals after Ultrashort Laser Pulse Irradiation [DOI: 10.2961/jlmn.2019.01.0002]
Cormac McDonnell, Department of Applied Science and Mechatronics, Munich University of Applied Sciences; Jan Winter, Department of Applied Science and Mechatronics, Munich University of Applied Sciences; Stephan Rapp, Department of Applied Science and Mechatronics, Munich University of Applied Sciences; Heinz Paul Huber, Department of Applied Science and Mechatronics, Munich University of Applied Sciences; Michael Schmidt, Lehrstuhl für Photonische Technologien, Friedrich-Alexander-Universität Erlangen-Nürnberg;
(pp.8-12) Received: July 19th, 2018, Accepted: January 5th, 2019
pdfr


03 Positive Effect of Laser Structured Surfaces on Tribological Performance [DOI: 10.2961/jlmn.2019.01.0003]
Tobias Stark, Robert Bosch GmbH; Sabri Alamri, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS; Alfredo I. Aguilar-Morales, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS; Thomas Kiedrowski, Robert Bosch GmbH; Andrés Fabián Lasagni, Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS;
(pp.13-18) Received: July 24th, 2018, Accepted: January 5th, 2019
pdfr


04 Fabrication of High Aspect Ratio Channels in Fused Silica Using Femto-second Pulses and Chemical Etching at Different Conditions [DOI: 10.2961/jlmn.2019.01.0004]
Simas Butkus, Laser Research Center, Faculty of Physics, Vilnius University; Martynas Rickus, Laser Research Center, Faculty of Physics, Vilnius University; Romualdas Sirutkaitis, Institute of Biochemistry, Vilnius University; Domas Paipulas, Laser Research Center, Faculty of Physics, Vilnius University; Valdas Sirutkaitis, Laser Research Center, Faculty of Physics, Vilnius University;
(pp.19-24) Received: July 26th, 2018, Accepted: January 5th, 2019
pdfr


05 Parabolic Vector Focus Wave Modes [DOI: 10.2961/jlmn.2019.01.0005]
Pavel Gotovski , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
(pp.25-30) Received: June 24th, 2018, Accepted: January 19th, 2019
pdfr


06 Microfabrication of Au Film Using Optical Vortex Beam [DOI: 10.2961/jlmn.2019.01.0006]
Sho Kawagoe, Graduate School of Information Science and Electrical Engineering, Kyushu University; Ryosuke Nakamura, Graduate School of Engineering, Chiba University; Ryohei Tasaki, Graduate School of Information Science and Electrical Engineering, Kyushu University; Hiroki Oshima, Graduate School of Information Science and Electrical Engineering, Kyushu University; Mitsuhiro Higashihata, Graduate School of Information Science and Electrical Engineering, Kyushu University; Daisuke Nakamura, Graduate School of Information Science and Electrical Engineering, Kyushu University; Takashige Omatsu, Graduate School of Engineering, Chiba University;
(pp.31-34) Received: July 26th, 2019, Accepted: January 19th, 2019
pdfr


07 Laser Ablation and Seeding for the Preparation of Highly Transparent Copper Conductive Networks on Glass [DOI: 10.2961/jlmn.2019.01.0007]
Joel N. Schrauben, Electro Scientific Industries [DOI: 10.2961/jlmn.2019.01.0007];
(pp.35-42) Received: September 26th, 2018, Accepted: January 27th, 2019
pdfr


08 Ultrafast-Laser Manufacture of Radially Emitting Optical Fiber Diffusers for Medical Applications [DOI: 10.2961/jlmn.2019.01.0008]
Stephan Ströbl, Vorarlberg University of Applied Sciences; Christoph Vonach, Vorarlberg University of Applied Sciences; Johannes Gratt, Vorarlberg University of Applied Sciences; Matthias Domke, Vorarlberg University of Applied Sciences; Ronald Sroka, Laser-Forschungslabor, LIFE-Zentrum – Department of Urology, University Hospital Munich;
(pp.43-48) Received: June 12th, 2018, Accepted: February 2nd, 2019
pdfr


09 A New Approach to Seal Polymer Microfluidic Devices Using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2019.01.0009]
Gian-Luca Roth, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.49-53) Received: June 23rd, 2018, Accepted: February 2nd, 2019
pdfr


10 Fiber Laser Based Single Pulse Drilling for Production of Perforated Ti-tanium Sheets for HLFC Structures [DOI: 10.2961/jlmn.2019.01.0010]
Roberto Ocaña, Advanced Manufacturing Technologies Unit; Carlos Soriano, Advanced Manufacturing Technologies Unit; Jose I. Esmoris, Advanced Manufacturing Technologies Unit; Rafael Sánchez, Technological Development Department,Aerometallic;
(pp.54-58) Received: June 27th, 2019, Accepted: February 2nd, 2019
pdfr


11 Laser Processing High Aspect Ratio Groove Wick for Improving the Thermal Performance of Flat Micro Heat Pipe [DOI: 10.2961/jlmn.2019.01.0011]
X. Z. Xie, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology; W. J. Hong, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology; J.Y. Long, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology; X. Wei, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology; W. Hu, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology; Q.L. Ren, Laser Micro/Nano Processing Research Lab, School of Electromechanical Engineering, Guang-dong University of Technology;
(pp.59-65) Received: June 23rd, 2018, Accepted: February 17th, 2019
pdfr


12 Investigation of Laser Processing of Biodegradable Nanofiber Nonwovens with Different Laser Pulse Durations [DOI: 10.2961/jlmn.2019.01.0012]
M. Götze, University of Applied Sciences Merseburg; T. Kürbitz, University of Applied Sciences Anhalt; O. Krimig, University of Applied Sciences Merseburg; C.E.H. Schmelzer, Fraunhofer Institute for Microstructure of Materials and Systems IMWS; A. Heilmann, University of Applied Sciences Anhalt; G. Hillrichs, University of Applied Sciences Merseburg;
(pp.66-73) Received: June 24th, 2018, Accepted: February 17th, 2019
pdfr


13 Vector Focus Wave Modes with Elliptic Cross-Section [DOI: 10.2961/jlmn.2019.01.0013]
Vitalis Vosylius, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
(pp.74-79) Received: June 24th, 2018, Accepted: February 23rd, 2019
pdfr


14 Multimaterial Manufacture Through Combining Optical Tweezers with Multiphoton Fabrication [DOI: 10.2961/jlmn.2019.01.0014]
M. Askari, Faculty of Engineering, The University of Nottingham, University Park; C. J. Tuck, Faculty of Engineering, The University of Nottingham, University Park; Q. Hu, Faculty of Engineering, The University of Nottingham, University Park; R. J. M. Hague , Faculty of Engineering, The University of Nottingham, University Park; R. D. Wildman, Faculty of Engineering, The University of Nottingham, University Park;
(pp.80-87) Received: June 26th, 2018, Accepted: February 23rd, 2019
pdfr


15 In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts [DOI: 10.2961/jlmn.2019.01.0015]
Benedikt Bornschlegel, Chair for Laser Technology, RWTH Aachen University; Johannes Finger, Chair for Laser Technology, RWTH Aachen University;
(pp.88-94) Received: June 24th, 2018, Accepted: March 3rd, 2019
pdfr


16 High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2019.01.0016]
Chao He, Chair for Laser Technology LLT, RWTH Aachen University; Kai Vannahme, Fraunhofer Institute for Laser Technology ILT; Arnold Gillner, Chair for Laser Technology LLT, RWTH Aachen University;
(pp.95-99) Received: June 27th, 2018, Accepted: March 6th, 2019
pdfr


17 Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser [DOI: 10.2961/jlmn.2019.01.0017]
Andreas Brenner, Fraunhofer Institute for Laser Technology; Benedikt Bornschlegel, Chair for Laser Technology LLT, RWTH Aachen University; Johannes Finger, Fraunhofer Institute for Laser Technology;
(pp.100-107) Received: July 25th, 2018, Accepted: March 31st, 2019
pdfr


18 Picosecond Pulsed Laser Ablation of Liquid Covered Stainless Steel: Ef-fect of Liquid Layer Thickness on Ablation Efficiency [DOI: 10.2961/jlmn.2019.01.0018]
Sietse van der Linden, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS³), Faculty of Engineering Technology, University of Twente; Rob Hagmeijer, Chair of Engineering Fluid Dynamics, Department of Thermal and Fluid Engineering, Faculty of Engineering Technology, University of Twente; Gert-willem Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS³), Faculty of Engineering Technology, University of Twente;
(pp.108-119) Received: June 24th, 2018, Accepted: April 3rd, 2019
pdfr


↑page top