jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 13, No. 3. (December, 2018)


01 Observation of Continuous and Non-continuous Laser Induced Periodic Structures on Silicon [DOI: 10.2961/jlmn.2018.03.0001]
Pravakar Satapathy , Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University; Rudrashish Panda, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University; Rajashree Sahoo, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University; Mukesh Kumar Shukla, School of Physical Sciences, NISER; Lizina Khatua, School of Electronics Engineering, KIIT University; Pratap Kumar Sahoo, School of Physical Sciences, NISER; Ritwick Das, School of Physical Sciences, NISER; Susanta Kumar Das, Dept. of Physics, School of Applied Sciences, KIIT Deemed to be University;
(pp.146-149) Received: May 1st, 2018, Accepted: September 9th, 2018
pdfr


02 Hybrid Laser Scribing and Chemical Etching Technique using Pulsed Nd³+:YAG Laser to Fabricate Controlled Micro Channel Profile [DOI: 10.2961/jlmn.2018.03.0002]
Srinagalakshmi Nammi, Department of Engineering Design, Indian Institute of Technology Madras; Sooraj Shiby, Department of Engineering Design, Indian Institute of Technology Madras; Bharat S Amroop, Department of Engineering Design, Indian Institute of Technology Madras; Nilesh J Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
(pp.150-154) Received: June 6th, 2017, Accepted: October 7th, 2018
pdfr


03 Vertical Microchannels for Microfluidic Multilayer Interconnections in PMMA [DOI: 10.2961/jlmn.2018.03.0003]
Gian-Luca Roth, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.155-159) Received: June 23rd, 2018, Accepted: October 7th, 2018
pdfr


04 Laser Induced Periodic Surface Structures on 100Cr6 Steel for Modification of Friction Demonstrated with Stribeck Test [DOI: 10.2961/jlmn.2018.03.0004]
Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Kevin Bokan, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Kevin Rutsch, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.160-165) Received: June 24th, 2018, Accepted: October 7th, 2018
pdfr


05 Towards a Numerical Model of Picosecond Laser-Material Interaction in Bulk Sapphire [DOI: 10.2961/jlmn.2018.03.0005]
L. Capuano, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ; D. de Zeeuw , Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ; G.R.B.E. Römer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3) Faculty of Engineering Technology, University of Twente ;
(pp.166-177) Received: June 26th, 2018, Accepted: October 7th, 2018
pdfr


06 Short and Ultrashort Pulsed Laser Processing of Zinc: Resolidification Morphology of Ablated Craters [DOI: 10.2961/jlmn.2018.03.0006]
H. Mustafa, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ; M. Jalaal, Physics of Fluids Group and Max Planck Center Twente, MESA+ Institute and J. M. Burgers Centre for Fluid Dynamics, Faculty of Science and Technology, University of Twente ; W. Ya, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ; N. Ur Rahman, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ; D.T.A. Matthews, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ; G.R.B.E. Romer, Chair of Laser Processing, Department of Mechanics of Solids, Surfaces & Systems (MS3), Faculty of Engineering Technology, University of Twente ;
(pp.178-188) Received: June 26th, 2018, Accepted: October 7th, 2018
pdfr


07 Laser-Induced Ejection of Millimeter-Sized Liquid Droplet from Metal Surface with a 1 Joule/Pulse ns-Laser [DOI: 10.2961/jlmn.2018.03.0007]
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST); Yoshinori Kato, Industrial Development Center, Hamamatsu Photonics K. K.; Takashi Kurita, Industrial Development Center, Hamamatsu Photonics K. K.; Toshiyuki Kawashima, Industrial Development Center, Hamamatsu Photonics K. K.;
(pp.189-192) Received: July 6th, 2018, Accepted: October 7th, 2018
pdfr


08 Fluid Cells Fabrication in Sol-Gel and Porous Glass [DOI: 10.2961/jlmn.2018.03.0008]
Yaroslava M. Andreeva, ITMO University; Maksim M. Sergeev, ITMO University; Roman A. Zakoldaev, ITMO University; Uliana E. Gabysheva, ITMO University; Vadim P. Veiko, ITMO University; Evgeniy B. Yakovlev, ITMO University; Sergey I. Kudryashov, ITMO University; Pavel A. Danilov, Lebedev Physical Institute; Andrey A. Ionin, Lebedev Physical Institute; Francis Vocanson, 3Hubert Curien Laboratory, UMR CNRS 5516/UJM/University of Lyon; Tatiana E. Itina, ITMO University; Tatiana V. Antropova, Grebenshchikov Institute of Silicate Chemistry, Russian Academy of Sciences ; Oleg S. Medvedev, 5St.-Petersburg State University, Research Park, IRC for Nanotechnology;
(pp.193-197) Received: July 12th, 2018, Accepted: October 7th, 2018
pdfr


09 Effect of Corner Angle on Laser Scribing Width and Depth of Al2O3 Ce-ramics: Experiment and Numerical Simulation [DOI: 10.2961/jlmn.2018.03.0009]
Kaijin Huang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University; Shu Wang , State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology; Xin Lin, State Key Laboratory of Solidification Processing, Northwestern Polytechnic University; Xian Chen , Zhejiang Provincial Key Laboratory of Laser Processing Robit/ Key Laboratory of Laser Precision Processing & Detection, Wenzhou University; Haisong Huang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University; Shihao Tang, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University; Feilong Du, Key Laboratory of Advanced Manufacturing Technology, Ministry of Education, Guizhou University;
(pp.198-205) Received: May 23rd, 2018, Accepted: October 9th, 2018
pdfr


10 Controlling Micron and Submicron Scale Laser Induced Surface Structures on Stainless Steel with Industrial Femtosecond Lasers [DOI: 10.2961/jlmn.2018.03.0010]
Fotis Fraggelakis, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine; Girolamo Mincuzzi, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine; John Lopez, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine; Rainer Kling, ALPhANOV, Technological Centre for Optics and Lasers, Optics Institute of Aquitaine; Inka Manek-Hönninger, Université de Bordeaux, CNRS;
(pp.206-210) Received: June 16th, 2018, Accepted: October 13th, 2018
pdfr


11 Laser-induced Microplasma as Effective Tool for Phase Elements Fabrication on Amorphous and Crystalline Materials [DOI: 10.2961/jlmn.2018.03.0011]
Victoria Shkuratova, ITMO University; Vladimir Rymkevich, ITMO University; Galina Kostyuk, ITMO University; Maksim Sergeev, ITMO University;
(pp.211-215) Received: June 29th, 2018, Accepted: October 13th, 2018
pdfr


12 Pure Titanium Foil Hybrid Surface Modification Using Ultraviolet Laser Micromachining [DOI: 10.2961/jlmn.2018.03.0012]
Chih-Chung Yang, Instrument Technology Research Center, National Applied Research Laboratories; Han-Chao Chang, Instrument Technology Research Center, National Applied Research Laboratories; Yu-Chen Hsien, Instrument Technology Research Center, National Applied Research Laboratories; Shih-Feng Tseng, Department of Mechanical Engineering, National Taipei University of Technology; Keh-moh Lin, Department of Mechanical Engineering, Southern Taiwan University of Science and Technology; Donyau Chiang, Instrument Technology Research Center, National Applied Research Laboratories; Kuo-Cheng Huang, Instrument Technology Research Center, National Applied Research Laboratories; Wen-Tse Hsiao, Instrument Technology Research Center, National Applied Research Laboratories;
(pp.216-222) Received: June 29th, 2018, Accepted: October 13th, 2018
pdfr


13 Vector Bessel Beams with Modified Field Distribution [DOI: 10.2961/jlmn.2018.03.0013]
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Ada Gajauskaitė , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Artūras Grabusovas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
(pp.223-227) Received: July 26th, 2018, Accepted: October 13th, 2018
pdfr


14 Tayloring Surface Properties of Rare Earth Magnesium Alloy for Biomedical Application Induced by Laser Processing [DOI: 10.2961/jlmn.2018.03.0014]
Shilin Nie, School of Mechanical Engineering & Automation, Beihang University; Guan Kai, Department Of Oncology, Center Of Excellence. Hefei BOE Hospital Co., Ltd.; Haoran Yu, School of Biological Science & Medical Engineering, Beihang University; Haifeng Liu, School of Biological Science & Medical Engineering, Beihang University; Yingchun Guan, School of Mechanical Engineering & Automation, Beihang University;
(pp.228-233) Received: June 25th, 2018, Accepted: October 21st, 2018
pdfr


15 Direct Laser Printing of Liver Cells on Porous Collagen Scaffolds [DOI: 10.2961/jlmn.2018.03.0015]
V. Leva, Department of Physics, National Technical University of Athens; M. Chatzipetrou, Department of Physics, National Technical University of Athens; L. Alexopoulos, Department of Mechanical Engineering, National Technical University of Athens; D. S. Tzeranis, Department of Mechanical Engineering, National Technical University of Athens; I. Zergioti, Department of Physics, National Technical University of Athens;
(pp.234-237) Received: July 26th, 2018, Accepted: October 21st, 2018
pdfr


16 Cavitation Erosion Properties of Microscale Texture Surfaces Induced by Laser Processing Technique [DOI: 10.2961/jlmn.2018.03.0016]
Enlan Zhao, School of Mechanical & Electrical Engineering, Xuzhou University of Technology; Haifeng Yang, School of Mechatronic Engineering, China University of Mining & Technology; Bo Sun, School of Mechatronic Engineering, China University of Mining & Technology; Haoxue Chen, School of Mechatronic Engineering, China University of Mining & Technology;
(pp.238-243) Received: June 9th, 2018, Accepted: October 25th, 2018
pdfr


17 Optical Bessel-like Beams with Engineered Axial Phase and Intensity Dis-tribution[DOI: 10.2961/jlmn.2018.03.0017]
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Alfonsas Juršėnas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Ernestas Nacius, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
(pp.244-248) Received: June 24th, 2018, Accepted: October 25th, 2018
pdfr


18 Laser Processing of Silicon Suboxide for the Fabrication of Multilevel Fused Silica Diffractive Phase Elements[DOI: 10.2961/jlmn.2018.03.0018]
Lukas Janos Richter, Laser-Laboratorium Göttingen e.V.; Clemens M. Beckmann, Laser-Laboratorium Göttingen e.V.; Jörg Meinertz, Laser-Laboratorium Göttingen e.V.; Jürgen Ihlemann, Laser-Laboratorium Göttingen e.V.;
(pp.249-253) Received: June 21st, 2018, Accepted: November 11th, 2018
pdfr


19 Large Scale Ultrafast Laser Micro Texturing with Multi-Beams [DOI: 10.2961/jlmn.2018.03.0019]
S. Bruening , Schepers GmbH & Co. KG; M. Jarczynski, Limo GmbH; K. Du, Edgewave GmbH; A. Gillner, Fraunhofer ILT;
(pp.254-262) Received: June 22nd, 2018, Accepted: November 11th, 2018
pdfr


20 Calculating the Borehole Geometry Produced by Helical Drilling with Ultrashort Laser Pulses [DOI: 10.2961/jlmn.2018.03.0020]
Alexander Kroschel, Robert Bosch GmbH; Andreas Michalowski, Robert Bosch GmbH; Franziska Bauer, Robert Bosch GmbH; Thomas Graf , Universität Stuttgart, Institut für Strahlwerkzeuge (IFSW);
(pp.263-267) Received: June 24th, 2018, Accepted: November 11th, 2018
pdfr


21 Utilizing Fundamental Beam-Mode Shaping Technique for Top-Hat La-ser Intensities in Direct Laser Interference Patterning [DOI: 10.2961/jlmn.2018.03.0021]
Mikhael El-Khoury, Fraunhofer Institute für Werkstoff und Strahltechnik IWS; Bogdan Voisiat, Institut für Fertigungstechnik, Technische Universitaet Dresden; Tim Kunze, Fraunhofer Institute für Werkstoff und Strahltechnik IWS; Andrés Fabián Lasagni, Fraunhofer Institute für Werkstoff und Strahltechnik IWS;
(pp.268-272) Received: June 25th, 2018, Accepted: November 11th, 2018
pdfr


22 Multi Pulse Pump-Probe Diagnostics for Development of Advanced Transparent Materials Processing [DOI: 10.2961/jlmn.2018.03.0022]
M. Jenne, TRUMPF Laser- und Systemtechnik GmbH; F. Zimmermann, TRUMPF Laser- und Systemtechnik GmbH; D. Flamm, TRUMPF Laser- und Systemtechnik GmbH; D. Großmann, TRUMPF Laser- und Systemtechnik GmbH; J. Kleiner, TRUMPF Laser- und Systemtechnik GmbH; M. Kumkar, TRUMPF Laser- und Systemtechnik GmbH; S. Nolte, Institute of Applied Physics, Friedrich-Schiller-University Jena;
(pp.273-279) Received: July 16th, 2018, Accepted: November 11th, 2018
pdfr


23 Vector Beams with Parabolic and Elliptic Cross-Sections for Laser Mate-rial Processing Applications [DOI: 10.2961/jlmn.2018.03.0023]
Sergej Orlov, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies; Vitalis Vosylius, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies; Pavel Gotovski, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies; Artūras Grabusovas, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies; Justas Baltrukonis, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies; Titas Gertus, State research institute Center for Physical Sciences and Technology, Industrial Laboratory for Photonic Technologies;
(pp.280-286) Received: July 26th, 2018, Accepted: November 11th, 2018
pdfr


24 Influence of Climatic Changes on the Joint Strength of Laser Joined Plas-tic-Metal-Hybrids [DOI: 10.2961/jlmn.2018.03.0024]
Kira van der Straeten, Fraunhofer Institute for Laser Technology ILT; Alexander Olowinsky, Fraunhofer Institute for Laser Technology ILT; Arnold Gillner, Fraunhofer Institute for Laser Technology ILT;
(pp.287-291) Received: June 20th, 2018, Accepted: November 18th, 2018
pdfr


25 Influence of Pulse Duration on High-Precision Manufacturing of 3D Geometries [DOI: 10.2961/jlmn.2018.03.0025]
Simon Schwarz, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Stefan Rung, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg; Cemal Esen, Applied Laser Technologies, Ruhr-University Bochum; Ralf Hellmann, Applied Laser and Photonics Group, University of Applied Sciences Aschaffenburg;
(pp.292-295) Received: June 20th, 2018, Accepted: November 18th, 2018
pdfr


26 New Approach for Assembling Dissimilar Materials: Laser Technology [DOI: 10.2961/jlmn.2018.03.0026]
Anne Henrottin, Lasea, Laser Engineering Applications; Jérôme Patars, Lasea, Laser Engineering Applications; Jose Antonio Ramos-de-Campo, Lasea, Laser Engineering Applications;
(pp.296-300) Received: July 24th, 2018, Accepted: November 18th, 2018
pdfr


27 On-line Interferometric Observation of Thermomechanically Induced Re-fractive Index Changes during Glass Welding by Ultra-short Laser Pulses [DOI: 10.2961/jlmn.2018.03.0027]
Kristian Cvecek, blz – Bayerisches Laserzentrum; Johannes Heberle, Graduate School in Advanced Optical Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg ; Isamu Miyamoto, Graduate School in Advanced Optical Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg ; Michael Bergler , Institute of Photonic Technologies, Friedrich-Alexander-University of Erlangen-Nürnberg; Dominique de Ligny, Institute of Glass and Ceramics, Friedrich-Alexander-University of Erlangen-Nürnberg; Michael Schmidt, blz – Bayerisches Laserzentrum;
(pp.301-308) Received: June 19th, 2018, Accepted: November 25th, 2018
pdfr


28 Biomimetic Anti-adhesive Surface Micro-structures of Electrosurgical Knife Fabricated by Fibre Laser [DOI: 10.2961/jlmn.2018.03.0028]
Chen Li, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology; Li-jun Yang, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology; Cheng-cheng Yan, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology; Wei Chen, College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology; Guang-hua Cheng, State Key Laboratory of Transient Optics and Photonics, Xi¡Çan Institute of Optics and Precision Mechanics;
(pp.309-313) Received: July 25th, 2018, Accepted: November 29th, 2018
pdfr


29 Damage-free Ablation Process for Back-contacted Silicon Heterojunction Solar Cells [DOI: 10.2961/jlmn.2018.03.0029]
Aryak Singh, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH; Bugra Turan, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH; Stefan Haas, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH; Andreas Lambertz, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH; Kaining Ding and Uwe Rau, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH; Uwe Rau, IEK5 - Photovoltaik, Forschungszentrum Jülich GmbH;
(pp.314-323) Received: July 27th, 2018, Accepted: November 29th, 2018
pdfr


30 Controllable Spatial Array of Bessel-like Beams with Independent Axial Intensity Distributions for Laser Microprocessing [DOI: 10.2961/jlmn.2018.03.0030]
Sergej Orlov, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Alfonsas Juršėnas, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Justas Baltrukonis , Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies; Vytautas Jukna, Center for Physical Sciences and Technology, Industrial laboratory for photonic technologies;
(pp.324-329) Received: June 24th, 2018, Accepted: December 6th, 2018
pdfr


↑page top