jlmn
subtitle_archive
ISSN 1880-0688
Click on "PDF" to download the full-text article in PDF format.

markVol. 12, No. 3. (December, 2017)


01 Comparative Study of Refractive Index Sensing Based on Three Different Long-Period Grating Configurations by Pulsed ArF Excimer Laser [DOI: 10.2961/jlmn.2017.03.0001]
Jian-Neng Wang, Department of Civil and Construction Engineering, National Yunlin University; Wei-Te Wu, Department of Biomechatronics Engineering, National Pingtung University; Chien-Hsing Chen, Department of Physics, National Chung Cheng University;
(pp.176-183) Received: June 5th, 2017, Accepted: September 24th, 2017
pdfr


02 Surface Alloying of Titanium Using a Nanosecond Laser with a Light-Transmitting Resin [DOI: 10.2961/jlmn.2017.03.0002]
Takuto Yamaguchi, Osaka Research Institute of Industrial Science and Technology; Hideki Hagino, Osaka Research Institute of Industrial Science and Technology;
(pp.184-188) Received: May 23rd, 2017, Accepted: September 30th, 2017
pdfr


03 Resistance Measurement of Laser Welded Dissimilar Al/Cu Joints [DOI: 10.2961/jlmn.2017.03.0003]
P. Schmalen, University of Luxembourg; P. Plapper, University of Luxembourg;
(pp.189-194) Received: June 3rd, 2017, Accepted: September 30th, 2017
pdfr


04 Investigation of Nd³+:YAG Laser Aided Surface Texturing to Improve Tribological Characteristics of Piston Ring [DOI: 10.2961/jlmn.2017.03.0004]
V. Ezhilmaran, Department of Mechanical Engineering, Indian Institute of Technology Madras; L. Vijayaraghavan, Department of Mechanical Engineering, Indian Institute of Technology Madras; N. J. Vasa, Department of Engineering Design, Indian Institute of Technology Madras;
(pp.195-202) Received: June 5th, 2017, Accepted: September 30th, 2017
pdfr


05 Water-Assisted Laser Drilling for Miniature Internal Thread in Glass and Evaluation of Its Strength [DOI: 10.2961/jlmn.2017.03.0005]
Reo Murakami, Department of Mechanical Engineering, Shibaura Institute of Technology; Hiroyuki Nakagawa, Department of Mechanical Engineering, Shibaura Institute of Technology; Shigeki Matsuo, Department of Mechanical Engineering, Shibaura Institute of Technology;
(pp.203-206) Received: June 16th, 2017, Accepted: September 30th, 2017
pdfr


06 Characterization of Refractive Index Change Induced by Femtosecond Laser in Lithium Niobate [DOI: 10.2961/jlmn.2017.03.0006]
Jian-Guan Hua, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University; Feng Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University; Zhen-Nan Tian, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University; Yan-Hao Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University; Yong-Sen Yu, State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineer-ing, Jilin University;
(pp.207-211) Received: July 25th, 2017, Accepted: October 3rd, 2017
pdfr


07 Laser-Induced Superhydrophobic Ti-Ni Shape Memory Alloy with Corrosion Resistance and Self-Cleaning Properties [DOI: 10.2961/jlmn.2017.03.0007]
Tianchi Chen, School of Mechanical & Electrical Engineering, China University of Mining and Technology; Shirong Ge, School of Mechanical & Electrical Engineering, China University of Mining and Technology; Hongtao Liu, School of Materials Science and Engineering, China University of Mining and Technology;
(pp.212-216) Received: August 3rd, 2017, Accepted: October 12th, 2017
pdfr


08 The Characteristic of Birefringence and Optical Loss in Femtosecond-Laser-Induced Region in terms of Nanogratings Distribution [DOI: 10.2961/jlmn.2017.03.0008]
Takafumi Ohfuchi, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Yuya Yamada, Hitachi Zosen Corporation; Masaaki Sakakura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Naoaki Fukuda, Hitachi Zosen Corporation; Toshio Takiya, Hitachi Zosen Corporation; Yasuhiko Shimotsuma, Department of Material Chemistry, Graduate School of Engineering, Kyoto University; Kiyotaka Miura, Department of Material Chemistry, Graduate School of Engineering, Kyoto University;
(pp.217-221) Received: May 23rd, 2016, Accepted: October 17th, 2017
pdfr


09 Nanosecond Laser Treatment of a-Si Thin Films for Enhanced Light Trapping and Minority Carrier Lifetime in Photovoltaic Cells [DOI: 10.2961/jlmn.2017.03.0009]
Esther Blesso Vidhya Y , Department of Engineering Design, Indian Institute of Technology; Nilesh J Vasa , Department of Engineering Design, Indian Institute of Technology;
(pp.222-229) Received: June 6th, 2017, Accepted: October 17th, 2017
pdfr


10 Time-Resolved Reflectivity and Temperature Measurements During Laser Irradiation of Crystalline Silicon [DOI: 10.2961/jlmn.2017.03.0010]
Michael Diez, Robert Bosch GmbH, C/CEP; Mawuli Ametowobla, Robert Bosch GmbH, CR/APJ2, Robert-Bosch-Campus; Thomas Graf, Institut für Strahlwerkzeuge, University Stuttgart;
(pp.230-234) Received: August 29th, 2017, Accepted: October 17th, 2017
pdfr


11 Thermal Damage of Carbon Fiber Reinforced Plastic by IR Fiber Laser Irradiation [DOI: 10.2961/jlmn.2017.03.0011]
Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (AIST); Yoshihisa Harada, National Institute of Advanced Industrial Science and Technology (AIST); Akira Fujisaki, Furukawa Electric Co., Ltd.;
(pp.235-238) Received: June 14th, 2017, Accepted: October 22nd, 2017
pdfr


12 Laser Drop on Demand Micro Joining for High Temperature Wire Bonding Applications – System Technology And Mechanical Joint Performance [DOI: 10.2961/jlmn.2017.03.0012]
Stefan Stein, Bayerisches Laserzentrum GmbH (blz); Jasmin Dippert, Bayerisches Laserzentrum GmbH (blz); Stephan Roth, Bayerisches Laserzentrum GmbH (blz); Michael Schmidt, Bayerisches Laserzentrum GmbH (blz);
(pp.239-247) Received: August 7th, 2017, Accepted: October 22nd, 2017
pdfr


13 Fabrication of Micropits by LIBWE for Laser Marking of Glass Materials [DOI: 10.2961/jlmn.2017.03.0013]
Tadatake Sato, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST); Aiko Narazaki, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST); Hiroyuki Niino, Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST);
(pp.248-253) Received: June 7th, 2017, Accepted: October 26th, 2017
pdfr


14 Stable Products of Laser-Induced Breakdown of Aqueous Colloidal Solutions of Nanoparticles [DOI: 10.2961/jlmn.2017.03.0014]
E.V. Barmina, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences; S.V. Gudkov, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences; A.V. Simakin, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences; G.A. Shafeev, A.M. Prokhorov General Prokhorov Institute of General Physics, Russian Academy of Sciences;
(pp.254-257) Received: June 30th, 2017, Accepted: October 28th, 2017
pdfr


15 Optimizing the Specific Removal Rate with the Burst Mode Under Varying Conditions [DOI: 10.2961/jlmn.2017.03.0015]
Beat Jaeggi, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies; Stefan Remund, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies; Yiming Zhang, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies; Thorsten Kramer, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies; Beat Neuenschwander, Bern University of Applied Sciences, Institute of Applied Laser, Photonics and Surface Technologies;
(pp.258-266) Received: June 3rd, 2017, Accepted: November 20th, 2017
pdfr


16 Laser Micromachining of Metals with Ultra-Short Pulses: Factors Limiting the Scale-Up Process [DOI: 10.2961/jlmn.2017.03.0016]
Beat Jaeggi, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ; Stefan Remund, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ; Rene Streubel, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ; Bilal Goekce, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ; Stefan Barcikowski, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg Essen ; Beat Neuenschwander, Institute of Applied Laser, Photonics and Surface Technologies ALPS, Bern University of Applied Sciences ;
(pp.267-273) Received: June 3rd, 2017, Accepted: November 20th, 2017
pdfr


17 3D Nano-Fabrication Using Controlled Bessel-Glass Interaction in Ultra-fast Modes [DOI: 10.2961/jlmn.2017.03.0017]
Manoj Kumar Bhuyan, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet; Praveen Kumar Velpula, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet; Madhura Somayaji, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet; Jean-Philippe Colombier, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet; Razvan Stoian, Laboratoire Hubert Curien, UMR 5516 CNRS, Université de Lyon, Université Jean Monnet;
(pp.274-280) Received: July 7th, 2017, Accepted: November 20th, 2017
pdfr


18 Fast Fabrication of Multilevel Phase Plates Used for Laser Beam Correction [DOI: 10.2961/jlmn.2017.03.0018]
Roman Zakoldaev, ITMO University; Galina Kostyuk, ITMO University; Vladimir Rymkevich, ITMO University; Vladislav Koval, ITMO University; Maksim Sergeev, ITMO University; Vadim Veiko, ITMO University; Evgeny Yakovlev, ITMO University; Aleksandr Sivers, ITMO University;
(pp.281-285) Received: July 8th, 2017, Accepted: November 20th, 2017
pdfr


19 Laser Processing of Dry, Wet and Immersed Polyamide Nanofiber Nonwovens with Different Laser Sources [DOI: 10.2961/jlmn.2017.03.0019]
Marco Götze, University of Applied Sciences Merseburg; Abdul Mannan Farhan, University of Applied Sciences Anhalt; Tobias Kürbitz, University of Applied Sciences Anhalt; Olaf Krimig, University of Applied Sciences Merseburg; Sven Henning, Fraunhofer Institute for Microstructure of Materials and Systems IMWS; Andreas Heilmann, University of Applied Sciences Anhalt; Georg Hillrichs, University of Applied Sciences Merseburg;
(pp.286-295) Received: June 1st, 2017, Accepted: November 20th, 2017
pdfr


20 Efficient Metal Processing Using High Average Power Ultrafast Laser [DOI: 10.2961/jlmn.2017.03.0020]
John Lopez, UNIV BORDEAUX; Konstantin Mishchik, AMPLITUDE SYSTEMES; Girolamo Mincuzzi, ALPHANOV; Eric Audouard, AMPLITUDE SYSTEMES; Eric Mottay*, AMPLITUDE SYSTEMES; Rainer Kling, ALPHANOV;
(pp.296-303) Received: June 30th, 2017, Accepted: November 20th, 2017
pdfr


21 (Technical Communication) Copper Nanoparticles by Laser Ablation Confined in Methanol in the Presence of an Argon Gas Environment [DOI: 10.2961/jlmn.2017.03.0021]
David Omar Oseguera Galindo, Instituto Tecnológico José Mario Molina Pasquel y Henríquez, Unidad Académica Tamazula, Tecnológico Nacional de México ; Eden Oceguera Contreras, Centro Universitario de los Valles, Universidad de Guadalajara;
(pp.304-306) Received: April 7th, 2017, Accepted: September 3rd, 2017
pdfr


22 (Technical Communication) Laser Percussion Drilling of High Temperature Alloy and Qualitative/ Quantitative Characterization [DOI: 10.2961/jlmn.2017.03.0022]
Hongyu Zhang , State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University; Ming Zhou, State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University; Yunlong Wang, School of Material Science and Engineering, Jiangsu University; Xiangchao Zhang, Shanghai Engineering Research Centre of Ultra-Precision Optical Manufacturing, Fudan University; Yu Yan, Corrosion and Protection Center, Beijing University of Science and Technology; Rong Wang, State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University;
(pp.307-312) Received: September 15th, 2016, Accepted: October 7th, 2017
pdfr


23 (Technical Communication) Laser Patterning of Thin Film Copper and ITO on Flexible Substrates for Terahertz Antenna Applications [DOI: 10.2961/jlmn.2017.03.0023]
Manikandan Esakkimuthu, Department of Electronics and Communication Engineering, SSN College of Engineering; Sreeja Balakrishnapillai Suseela, Department of Electronics and Communication Engineering, SSN College of Engineering; Radha Sankararajan, Department of Electronics and Communication Engineering, SSN College of Engineering; Abhishek Gupta, Tata Institute of Fundamental Research; Goutam Rana, Indian Institute of Technology; Prabhu S. , Tata Institute of Fundamental Research;
(pp.313-320) Received: August 12th, 2017, Accepted: October 17th, 2017
pdfr


24 (Technical Communication) Drilling of Through Holes in Sapphire Using Femtosec-ond Laser Pulses [DOI: 10.2961/jlmn.2017.03.0024]
Konstantin Mishchik , Amplitude Systemes; Kevin Gaudfrin, ALPhANOV; John Lopez , Université Bordeaux – CNRS – CEA;
(pp.321-324) Received: June 30th, 2017, Accepted: December 10th, 2017
pdfr


↑page top