Proceedings
of LPM2023
The 24th
International Symposium on Laser Precision Microfabrication
June
13-16, 2023, Hirosaki, Japan
General
Chair
Hiroyuki Niino, AIST-National Institute of Advanced Industrial
Science and Technology, Japan
Co-Chairs:
Yasuhiro
Okamoto, Okayama University, Japan (Program Committee Chair)
Yongfeng Lu,
University of Nebraska-Lincoln, USA
Michael
Schmidt, Friedrich-Alexander-Universität Erlangen-Nurnberg, Germany
Honorary
Chairs:
Isamu Miyamoto,
Osaka University, Japan
Koji
Sugioka, RIKEN, Japan
Paper number for quotation: #23-three digits number
For
viewing the full text of each paper, please click “PDF”.
Password
is required to open each PDF file.
The
password has been sent to the attendees from LPM2023 Secretariat by e-mail.
#23-001 [PDF] C000012, R1-S01-1
Learning
the inverse solution of laser drilling model
Zahra Kheirandish1, Christian Heinigk1, and Wolfgang
Schulz1,2
1- Nonlinear Dynamics of Laser Processing,
RWTH Aachen University, Aachen, Germany
2- Fraunhofer Institute for Laser
Technology, Aachen, Germany
#23-002 [PDF] C000058,
R1-S01-2
A
port-Hamiltonian system for the simulation of deformations occurring in
laser-matter interaction
*Christian
Heinigk1 and Wolfgang Schulz1, 2
1- RWTH
Aachen University - Department NLD, Germany
2-
Fraunhofer ILT, Germany
#23-003 [PDF] C000068,
R1-S01-4
Simulation
of laser-induced thermo-mechanical stress in indium tin oxide with transient
optical properties
Dorian Kurschner*1, Goran
Hallum2, Heinz Huber2, and Wolfgang Schulz1
1- Department NLD, RWTH Aachen
University, Germany
2- Department of Applied Sciences
and Mechatronics, Hochschule Munchen University of
Applied Sciences, Munich, Germany
#23-004 [PDF] C000143,
R4-S04-3
Photochemical
reaction of wood by laser irradiation for utilization of cellulose nanofiber
Leo
Adachi*, Shuhei Yamada, Shun-ichi Ishiuchi, and
Hiroyuki Wada
Tokyo
Institute of Technology, Japan
#23-005 [PDF] C000197,
R1-S05-2
Numerical
simulation of silicon laser ablation with GHz bursts of femtosecond pulses
*Ashkan
Momeni and Koji Sugioka
RIKEN Center for Advanced Photonics, Saitama, Japan
#23-006 [PDF] C000178,
R1-S05-4
Intra-burst
interaction during ultrashort pulsed laser structuring of metals with variable
temporal pulse spacing
Benedikt Bornschlegel1
and Dennis Haasler*2
1- Chair for Laser Technology LLT –
RWTH Aachen University, Aachen, Germany
2- Fraunhofer Institute for Laser Technology ILT, Aachen, Germany
#23-007 [PDF] C000010,
R2-S06-4
Minimizing
defect on Ti thin film laser ablation using square flat-top NIR femtosecond
laser for TFT of µ-LED repair
Junha Choi1,2, Kwangwoo Cho1,2, Won-Seok Chang1,2, Sunghwan Chang2, and
Sung-Hak Cho*1,2
1-
Department of Nano-Mechatronics, Korea University of
Science and Technology, South Korea
2-
Department of Nano-manufacturing Technology, Nano-Convergence Manufacturing
Systems Research Division, Korea Institute of Machinery and Materials, South
Korea
#23-008 [PDF] C000182,
R3-S07-2
Glass
molding tools fabricated with Selective Laser-induced Etching for sustainable
treatment of solid-state electrolytes
Christian
Peters*1, Benjamin Geppert1, Enkhtsetseg Dashjav2,
Martin Kratz1, and Frank Tietz2
1- Fraunhofer ILT - Institute for Laser Technology, Aachen, Germany
2- Forschungszentrum Jülich GmbH, Jülich, Germany
#23-009 [PDF] C000193,
R4-S08-3
Selective
laser paint stripping technology with composite material
Satoshi Gyobu, Takumi Sato, Toshikatsu Nohara, and Saneyuki Goya
Research Innovation Center, Mitsubishi Heavy Industries, Nagoya, Aichi,
Japan
#23-010 [PDF] C000158,
R4-S08-4
Pulse
duration dependence of infrared laser-induced secondary electron yield
reduction of copper surfaces
Pierre Lorenz*1,
Elena Bez2,3, Marcel Himmerlich2, Martin Ehrhardt1,
Mauro Taborelli2, and Klaus Zimmer1
1- Leibniz Institute of Surface
Engineering (IOM), Leipzig, Germany
2- CERN (European Organization for
Nuclear Research), Geneva, Switzerland
3- Faculty of Physics and Earth Sciences,
University of Leipzig, Leipzig, Germany
#23-011 [PDF] C000259,
R4-S08-5
A study
on the enhancement of chemical and mechanical properties of low carbon steel
surface cleaned with nanosecond pulsed laser
Vishnu
Narayanan, Almigdad W.G. Ali, Ramesh Singh, and
Deepak Marla*
Department
of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai, India
#23-012 [PDF] C000186,
R1-S09-5
4H-SiC
surface modified by green femtosecond laser at low fluence
Yi-Hsien Liu1 and Chung-Wei Cheng1*
Department of Mechanical Engineering, National Yang Ming
Chiao Tung University, Hsinchu, Taiwan
#23-013 [PDF] C000138,
R2-S10-2
Preparation
of CeO2/GO nano-complex with laser ablation in liquid method applicated
in sensing electrode
Mengqi Shi, Yoshitaka Kitamoto,
and Hiroyuki Wada*
Tokyo Institute of Technology, Japan
#23-014 [PDF] C000272, R3-S11-3
Laser color
marking of stainless steel – A study on color variation with multiple scans
Ankit
Awasthi and Deepak Marla
Department
of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai, India
#23-015 [PDF] C000264,
R4-S12-4
Enhancing
laser processing thanks to beam-shaping based on Multi-Plane Light Conversion technology
Adeline Orieux, Ivan Gusachenko, Adrien Douard, Gwenn Pallier*, Guillaume Labroille
Cailabs, France
#23-016 [PDF] C000191, R4-S12-5
Ultrashort pulse laser surface texturing
for injection mold functionalization
Andreas Gruner*, Joerg Schille,
and Udo Loeschner
Laserinstitut Hochschule Mittweida, University
of Applied Sciences Mittweida, Germany
#23-017 [PDF] C000171, R1-S13-1
Comparison of different Rayleigh lengths
for micro drilling processes for multibeam applications
Philipp Bremer* and Dennis Haasler
Fraunhofer
Institute for Laser Technology ILT, Germany
#23-018 [PDF] C000174, R1-S13-2
First-time right ablation with flexible multibeams generated by a high-power spatial light modulator
Martin Kratz*1, Benedikt
Bornschlegel2, Marcel Kniffler1,2, Moritz Kröger2,
and Martin Reininghaus1
1- Fraunhofer ILT – Institute for
Laser Technology, Aachen, Germany
2- RWTH Aachen University LLT – Chair for Laser Technology, Aachen,
Germany
#23-019 [PDF] C000160, R3-S15-4
Analysis of glass welding process by infrared ultrashort pulse laser (USPL) at high pulse repetition rates
Isamu Miyamoto*1, 2, Kristian Cvecek2, 3, and Michael Schmidt3, 4
1- Osaka University, Japan
2- Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany
3- Institute of Photonic Technologies, .Friedrich-Alexander-University
of Erlangen-Nuerenberg, Germany
4- Bayerisches Laserzentrum, Germany
#23-020 [PDF] C000214,
R4-S16-4
Enhancing
material characteristics for stereolithography: The impact of multifunctional dendritic
oligomers
Maximilian Frederick Flesch1*,
Klaus Kreuels2, and Julius Alexander Funke1
1- Fraunhofer Institute for Laser
Technology ILT, Aachen, Germany
2- Chair for Laser
Technology LLT – RWTH Aachen University, Aachen, Germany
#23-021 [PDF] C000220,
R2-S18-3
Cu-based
electrodes for non-enzymatic glucose detection fabricated by green femtosecond
laser reductive sintering
Hirokazu
Komatsu1, Kyohei Yoshidomi1, Evgenia M. Khairullina2,
Ilya I. Tumkin2, and Mizue Mizoshiri1
1-
Nagaoka University of Technology, Japan
2-
St. Petersburg State University, Russia
#23-022 [PDF] C000111,
R3-S19-3
Evaluation
of loading system based on fiber optical Mach-Zehnder interferometer and
smartphone sensor with Phyphox
Jian-Neng
Wang* and Wei-Chen Lin
National
Yunlin University of Science and Technology, Douliou,
Yunlin, Taiwan
#23-023 [PDF] C000254,
R3-S19-5
Millisecond
pulsed laser micro-drilling of stainless steel – optimizing hole quality using
response surface methodology
Arvind Kumar Gupta, Ramesh Singh, and Deepak Marla*
Mechanical
Engineering Department, Indian Institute of Technology Bombay, Mumbai, India
#23-024 [PDF] C000019, R4-S20-1
Parametric
study of ultrasuperhydrophobic nanotextured microstructured surface topographies produced by picosecond
laser micromachining
Evgueni
Bordatchev*1,2 and Honghe
Wu2,1
1-
Automotive and Surface Transportation Research Center,National Research Council of Canada, London,
Ontario, Canada
2- Department of Mechanical and
Materials Engineering Western University, London, Ontario, Canada
#23-025 [PDF] C000092,
R4-S20-2
Laser-induced
forward transfer of Ni-rich NiTi alloys for shape
memory applications
Logaheswari Muniraj*1,
Marcus Ardron2, Robert L Reuben3, and Duncan P Hand1
1-
Institute of Photonics and Quantum Sciences, Heriot-Watt University, Edinburgh,
UK
2- Renishaw Plc., Research Avenue,
Edinburgh, UK
3- Institute of Mechanical, Process,
and Energy Engineering, Heriot-Watt University, Edinburgh, UK
#23-026 [PDF] C000124, R1-S21-3
Ablation mechanisms
influencing ultrashort pulse selective line ablation of multi-layer thin film systems
Astrid Sassmannshausen*1,
Semjon Mooraj2, and Martin Kratz3
1- Chair for Laser Technology, RWTH Aachen University,
Germany
2- Saint-Gobain Sekurit Deutschland
GmbH, Germany
3- Fraunhofer Institute for Laser Technology ILT,
Germany
#23-027 [PDF] C000176,
R3-S23-4
Ablation
of technical ceramics via cw-laser radiation and
comparison with an ultrashort-pulsed laser ablation process
Dennis Haasler*, Ralph Surrey,
and Philipp Bremer
Fraunhofer-Institute
for Laser Technology ILT, Aachen, Germany
#23-028 [PDF] C000034,
R1-S25-2
Processing
3D transparent materials with sub-micron precision by ultrafast laser
technologies: application to cancer research
Felix
Sima*1,2, Mirai Hanzawa2,
Kotaro Obata2, Hiroyuki Kawano2,
and Koji Sugioka*2
1- CETAL,
National Institute for Laser, Plasma and Radiation Physics, Romania
2- RIKEN Center for Advanced Photonics, Japan
#23-029 [PDF] C000136,
R2-S26-5
Preparation
of manganese phthalocyanine nanoparticles by laser ablation in liquid and
application to bioimaging
Yuchun Wang and Hiroyuki Wada
Tokyo
Institute of Technology, Japan
#23-030 [PDF] C000177,
R3-S27-3
Platform
for adaptive integration of data-driven models and simulations into USP
Manufacturing Systems
Moritz
Kröger*1, Corvin Lasogga2, Martin Kratz2,
Christian Hinke1, and Carlo Holly2
1- Chair for Laser Technology LLT,
RWTH Aachen University, Aachen, Germany
2- Fraunhofer
Institute for Laser Technology ILT, Aachen, Germany
#23-031 [PDF] C000047,
R4-S28-1
High
precision ultra-short pulse laser micro structuring of nickel materials by
combining direct laser interference patterning technique with polygon scanner
Fabian
Ränke1*, Robert Baumann1, Bogdan Voisiat1, and
Andrés Fabián Lasagni1,2
1- Institute for Manufacturing
Technology, Technische Universität Dresden, Dresden,
Germany
2- Fraunhofer Institute for Material
and Beam Technology IWS, Dresden, Germany
#23-032 [PDF] C000156,
R4-S28-2
Laser-interference
treatment improves osteogenic differentiation of human bone marrow stromal
cells on additively manufactured near-beta titanium alloy
Frederic
Schell*1, Avinash Hariharan2, Phil Goldberg2,
Ute Hempel3, Martin Hantusch2, Friedrich Striggow2,
Mariana Medina Sánchez2, Christoph Zwahr1,
Andrés F. Lasagni1,4, and Annett Gebert2
1-
Fraunhofer Institute for Material and Beam Technology IWS, Dresden, Germany
2- Leibniz Institute for Solid State
and Materials Research (IFW) Dresden, Dresden, Germany
3- Institute of Physiological
Chemistry, Faculty of Medicine Carl Gustav Carus, Technische Universität Dresden, Dresden, Germany
4- Institut für
Fertigungstechnik, Technische Universität Dresden, Dresden, Germany
#23-033 [PDF] C000022,
R4-S28-3
Surface
functionalization of additively manufactured Scancromal®
components by using nanosecond pulsed DLW and DLIP techniques
Florian
Kuisat*1, Fabian Ränke1, Robert
Baumann1, Frank Palm2, Andrés F. Lasagni1,3
1- Institut
für Fertigungstechnik, Technische
Universität Dresden, Dresden, Germany
2- Airbus Defence
and Space GmbH, Taufkirchen, Germany
3- Fraunhofer Institute für Werkstoff- und Strahltechnik IWS,
Dresden, Germany
#23-034 [PDF] C000196,
R4-S28-4
Laser
surface texturing of metals using dynamic melt expulsion by application of fast
modulated cw-laser radiation
Andreas
Schkutow* and Thomas Frick
Institute for Chemistry, Materials and
Product Development, Technische Hochschule Nürnberg
Georg Simon Ohm, Nürnberg, Germany
#23-035 [PDF] C000249,
R4-S28-5
Size
effect of Cu2O nanospheres on femtosecond laser reductive sintering
for copper-based patterning
Mizue
Mizoshiri*, Kien Trung Vu Ngyen, Thuan Duc Tran, and Ohsuke Mizutani
Nagaoka University of Technology,
Nagaoka, Niigata, Japan
#23-036 [PDF] C000261, R1-S29-4
Room temperature space-selective precipitation of silver nanoparticles
inside Tb3+-doped paramagnetic silica xerogels using femtosecond laser
Seisuke Nakashima*1, Susumu Nomura1, Rino Mizutani1, Ken Honda1, Kou Yamamoto1, Yasuhiko Shimotsuma2, and Kiyotaka Miura2
1- Department of Electronics and Materials Scieince, Faculty of Engineering,
Shizuoka University, Japan
2- Department of Material Chemistry, Kyoto University, Japan
#23-037 [PDF] C000207,
R2-S30-4
Influence
of thermal diffusion on femtosecond laser pulse-induced copper precipitation
from surfactant added glyoxylic acid copper complex ink
Nam
Phuong Ha1, Tomoji Ohishi2, and
Mizue Mizoshiri*1
1-
Nagaoka University of Technology, Japan
2- Shibaura Institute of Technology,
Japan
#23-038 [PDF] C000066,
R1-S33-1
Comparison
of single pulse irradiation of different types of stainless steel with ultra-short pulsed laser
Dirk
Obergfell1,2, *, Bahman Azarhoushang2, and Andrés Fabián
Lasagni2,3
1- Institute of Precision Machining
(KSF), Furtwangen University, Tuttlingen,
Germany
2- Institute
for Manufacturing Technology, Technische Universität
Dresden, Dresden, Germany
3- Fraunhofer
Institut für Werkstoff- und Strahltechnik IWS, Dresden,
Germany
#23-039 [PDF] C000064,
R1-S33-2
Femtosecond
laser ablation modeling of tilted microfeatures on copper surfaces
Pol
Vanwersch*1,2, Balasubramanian Nagarajan1,
Albert Van Bael2, and Sylvie Castagne1
1- KU Leuven, Department of Mechanical
Engineering and Flanders Make@KU Leuven - M&A,
Leuven, Belgium
2- KU Leuven, Department of Materials
Engineering, Diepenbeek Campus, Belgium
#23-040 [PDF] C000032,
R1-S33-3
Surface
characterization of thin titanium foils processed by femtosecond laser ablation
in liquids
Philipp
L. Maack*1, Christian R. Günther1, Konrad Bargon1,
Alexander Kanitz2, Cemal Esen1, and Andreas Ostendorf1
1- Applied
Laser Technologies, Ruhr University Bochum, Bochum, Germany
2- Lidrotec GmbH, Bochum, Germany
#23-041 [PDF] C000081,
R2-S34-3
Development
of high-power infrared laser capable phase-only spatial light modulator
Yu
Takiguchi*, Hiroshi Tanaka, Tsubasa Watanabe, Naoaki
Kato, Keisuke Uchida, Munenori Takumi, Tomoko
Otsu-Hyodo, Kazuhiro Nakamura, and Haruyoshi Toyoda
Central Research Laboratory, Hamamatsu
Photonics K. K., Japan
#23-042 [PDF] C000053,
R3-S35-3
Thickness
dependence of laser damage in silicon thin films
Prachi
Venkat* and Tomohito Otobe
Kansai
Photon Science Institute, National Institutes for Quantum Science and
Technology, Kyoto, Japan
#23-043 [PDF] C000180,
R4-S36-3
Classification
of photo-acoustic emission in Direct Laser Interference Pattering for
identifying the spatial period
Tobias
Steege*1, Adrian Belkin1, Christoph Zwahr1 and
Andrés F. Lasagni1,2
1- Fraunhofer Institute for Material
and Beam Technology IWS, Dresden,
Germany
2- Institut für
Fertigungstechnik, Technische Universität Dresden, Dresden, Germany
#23-044 [PDF] C000145,
R1-S37-2
Pulse-duration-dependence
of novel metal alloying on Fe/Cr/Ni thin films by ultra-short
pulsed laser irradiation
Taiyoh Kawano1, Taketo Furuichi1,
Eibon Tsuchiya2, Makoto Yamaguchi3,
Tatsuya Okada1, Yohei Kobayashi2, and Takuro
Tomita*1
1- Graduate School of
Science and Technology for Innovation, Tokushima University, Japan
2- Institute for Solid
State Physics, University of Tokyo, Japan
3- Graduate School of
Engineering Science, Akita University, Japan
#23-045 [PDF] C000093,
R1-S37-3
Femtosecond
laser slicing of single crystal AlN layer grown by
Hydride Vapor Phase Epitaxy on an AlN substrate
generated by Physical Vapor Transport
Yang
Yang1, Katsuo Matsui1, Yasuhiko Shimotsuma*1,
Taishi Furuya2, Reo Yamamoto2, Toru Nagashima2,
Masahiro Shimizu1, and Kiyotaka Miura1
1- Department of Material Chemistry,
Graduate School of Engineering, Kyoto University, Kyoto, Japan
2- Tsukuba Research Laboratories,
Tokuyama Corporation, Tsukuba, Ibaraki, Japan
#23-046 [PDF] C000188,
R2-S38-3
Machine
learning for scanning path prediction in laser forming- Application of
structured patterns and CNN –
Ping-Hsien
Chou1,2, Keiji Yamada*1, Yean-Ren Hwang2,
Eisuke Sentoku3, Ryutaro Tanaka1, and Katsuhiko Sekiya1
1- Graduate School of Advanced Science
and Engineering, Hiroshima University, Japan
2- Department of Mechanical
Engineering, National Central University, Taiwan (R.O.C)
3- Department of Mechanical
Engineering, National Institute of Technology, Fukui College, Japan
#23-047 [PDF] C000141,
R3-S39-3
Comparison
of ionization models in nonlinear propagation simulation in air for femtosecond
laser ablation
Ryohei
Yamada, Wataru Komatsubara, Haruyuki
Sakurai, Kuniaki Konishi, Norikatsu Mio, Junji Yumoto, and Makoto Kuwata-Gonokami*
Department of Physics, The University
of Tokyo, Tokyo, Japan
#23-048 [PDF] C000116,
R4-S40-1
In-situ
monitoring of laser machining in transparent and hard brittle materials with
chuck-based electric fields
Zhe-Yu
Xie1, Han-san Xie2, and Chao-Ching Ho*1,2
1- Graduate Institute of Automation
Technology, National Taipei University of Technology, Taiwan
2- Graduate Institute of Manufacturing
Technology, National Taipei University of Technology, Taiwan
#23-049 [PDF] C000079,
R4-S40-3
Fast
determination of beam properties of ultrafast lasers during processing using
spectral X-ray emission
Julian Holland*, Rudolf Weber, Christian
Hagenlocher, and Thomas Graf
Institut für
Strahlwerkzeuge IFSW (Uni Stuttgart), Germany
#23-050 [PDF] C000091,
P1-2
Photoinduced
structural change inside MgO single crystal
Taira
Sakurai*, Yasuhiko Shimotsuma, Masahiro Shimizu, and Kiyotaka Miura
Department of Material Chemistry,
Kyoto University, Japan
#23-051 [PDF] C000185,
P1-4
Investigation
on luminescence near focal point during ultrafast laser microwelding
of glass substrates
Junpei Fujiwara1 *, Hikari Okuno2,
Taiga Sasahara2, Takao Ota1, 2, Wataru Watanabe3, and Takayuki
Tamaki1, 2,*
1-
Advanced Mechanical Engineering Course, Faculty of Advanced Engineering Control
Engineering, National Institute of Technology (KOSEN), Nara College, Nara, Japan
2- Department of Control Engineering, National Institute of Technology (KOSEN),
Nara College, Nara, Japan
3- Department of Electrical ＆
Electronic Engineering, College of Science and Engineering, Ritsumeikan
University, Kusatsu, Shiga, 525-8577 Japan
#23-052 [PDF] C000044,
P1-8
Effect of
laser irradiation on TiO2 particles and their property of
sonodynamic therapy
Yu
Gito, Yoshitaka Kitamoto,
and Hiroyuki Wada*
School of Materials and Chemical
Technology, Tokyo Institute of Technology, Japan
#23-053 [PDF] C000051, P1-11
Femtosecond
direct laser interference patterning of nickel electrodes for improving
electrochemical properties
Fabian
Ränke1*, Stephan Moghtaderifard1, Lis Zschach1,
Robert Baumann1, Bogdan Voisiat1, Marcos Soldera1,
Leonard Günther1, Sebastian Hilbert2, Christian I.
Bernäcker2, Thomas Weißgärber2, and Andrés F. Lasagni1,3
1- Institute for Manufacturing
Technology, Technische Universität Dresden, Dresden,
Germany
2- Fraunhofer-Institut
für Fertigungstechnik und Angewandte Materialforschung IFAM, Dresden, Germany
3- Fraunhofer-Institut
für Werkstoff- und Strahltechnik IWS, Dresden, Germany
#23-054 [PDF] C000137,
P1-12
Effects
of multi-spot laser irradiation on laser peening
Megat
Adam Bin Megat Harris*1, Taiki Nakayama1, Ryota Kasumi1,
Miho Tsuyama1, Manabu Heya2, and Hitoshi Nakano1
1- Faculty of Science and Engineering,
Kindai University, Higashi-Osaka, Osaka, Japan
2- Faculty of Engineering, Kindai University, Hiroshima, Japan
#23-055 [PDF] C000140,
P1-13
Laser
peening using silicone rubber as a plasma confinement layer in a vacuum environment
Mai
Zhang*1, Yang Zhang1, Yuki Kasai1, Miho
Tsuyama1, Manabu Heya2, and Hitoshi Nakano1
1- Faculty of Science and Engineering,
Kindai University, Japan
2- Faculty of Engineering, Kindai University, Japan
#23-056 [PDF] C000025,
P1-17
Rapid μm ITO
electrode patterning by laser-direct writing using a modest commercial fibre laser scriber
Ting-Wei
Guo1,2, Wei-Cheng Kao1, and Ji-Yen Cheng *1,2,3,4
1- Research Center for Applied
Sciences, Academia Sinica, Taipei, Taiwan
2- Institute of Biophotonics,
National Yang Ming Chiao Tung University, Taipei, Taiwan
3- Department of Mechanical and
Mechatronic Engineering, National Taiwan Ocean University, Keelung, Taiwan
4- College of Engineering, Chang Gung
University, Taoyuan, Taiwan
#23-057 [PDF] C000227,
P1-18
Femtosecond
laser direct writing using SiC nanoparticle ink
containing finer nanoparticles
Khaliun
Amarsaikhan*1, Tatsuru Kawabori1, Masashi Watanabe2,
Yoshiyuki Imai2, Shohei Ueta2, Xing L. Yan2,
and Mizue Mizoshiri1
1- Nagaoka University of Technology,
Japan
2- Japan Atomic Energy Agency, Japan
#23-058 [PDF] C000055, P1-24
Sensor fusion
for position estimation in robot-based Laser Materials Processing
*Philipp Walderich, Leon Michel Gorissen,
Thomas Kaster, Christian Hinke
Chair for Laser Technology - RWTH Aachen University, Aachen, Germany
#23-059 [PDF] C000183, P2-2
Relationship
between shapes of laser-processed marks and laser-pulse numbers in copper sintering
using a nanosecond and picosecond burst-mode femtosecond laser
Taiga Sasahara1, *, Jumpei Fujiwara1, Takao
Ota1, Wataru
Watanabe2, and Takayuki
Tamaki1, *
1-
Advanced Mechanical Engineering Course, Faculty of Advanced Engineering Control
Engineering, National Institute of Technology (KOSEN), Nara College, Japan
2-
Department of Electrical ＆
Electronic Engineering, College of Science and Engineering, Ritsumeikan
University, Japan
#23-060 [PDF] C000043,
P2-6
Preparation
of hexagonal-boron nitride nanoparticles by laser ablation in liquid and their
properties
Kazuki
Yamada, Yoshitaka Kitamoto, and Hiroyuki Wada*
School of Materials and Chemical
Technology, Tokyo Institute of Technology, Japan
#23-061 [PDF] C000038,
P2-10
Titanium
surface nanostructuring by picosecond laser
irradiation for surface improvement of dental abutments
Florin
Jipa1, Paula Florian1,2, Madalina Icriverzi1,2,
Gianina Popescu-Pelin1, Dragos Budei3,4, Emanuel Axente*1,
Koji Sugioka5, and Felix Sima*1,5
1- National Institute for Laser,
Plasma and Radiation Physics (INFLPR), Magurele, Romania
2- Institute of Biochemistry of the
Romanian Academy, Bucharest, Romania
3- Dentix
Millennium SRL, Giurgiu, Romania
4- Applied Chemistry and Material
Sciences Faculty, Inorganic Chemistry, Physics Chemistry and Electro-Chemistry
Department, Polytechnic University of Bucharest, Bucharest, Romania
5- RIKEN Center for Advanced
Photonics, Wako, Saitama, Japan
#23-062 [PDF] C000139,
P2-12
Effects
of laser peening parameters on plastic deformation under double pulse laser
irradiation
Tomohiro
Shimotusma*1, Nor Syaza
Batrisyia Nor Bahri1, Tsubasa Montani1,
Miho Tsuyama1, Manabu Heya2, and Hitoshi Nakano1
1- Faculty of Science and Engineering,
Kindai University, Japan
2- Faculty of Engineering, Kindai University, Japan
#23-063 [PDF] C000194, P2-14
Effect of
laser peening with a plasma confinement layer having high acoustic impedance
and a shape-following ability
Miho
Tsuyama*1, Yang Zhang1, Manabu
Heya2, and Hitoshi Nakano1
1- Faculty of Science and Engineering,
Kindai University, Higashi-osaka,
Osaka, Japan
2- Faculty of Engineering, Kindai University, Higashi-hiroshima,
Hiroshima, Japan
#23-064 [PDF] C000039,
P2-15
Woodpile-like
SU-8 scaffolds fabricated by two photon polymerization
for 3D cancer cell invasion assay
Alexandra
Bran*1, Stefana Orobeti1, 2, Florin Jipa1,
Emanuel Axente1, Livia Elena Sima2, Felix Sima*1,3,
and Koji Sugioka3
1- CETAL, National Institute for Laser, Plasma and Radiation
Physics, Romania
2- Institute of Biochemistry of
Romanian Academy, Romania
3- RIKEN Center for Advanced
Photonics, Japan
#23-065 [PDF] C000146, R1-S21-4
Initial stage of Si processing using single pulse of NIR fs-laser
Masahito Katto1,2, Masanori Kaku2, Yuji Sato3, Masahiro Tsukamoto3, and Atsushi Yokotani2
1- OPRIARC, University of Miyazaki, Japan
2- Graduate School of Engineering, University of Miyazaki ,Japan
3- JWRI, Osaka University, Japan
Copyright ©2023, Japan Laser Proceeding Society (JLPS). All Rights Reserved.
Published on August 9, 2023
Contact
E-mail: 